• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.169-171
• /
• 2007

비접촉 전력전송 시스템에 사용되는 변압기는 일반적인 변압기와 달리 구조적으로 분리된 형태를 갖는다. 이로 인해 결합 시 일반적인 변압기에 비해 큰 공극이 발생하게 된다. 본 논문에서는 상대적으로 큰 공극이 발생하여도 높은 결합계수를 유지하여 전력전달 특성이 우수한 'ㅁㅓ' 코어를 이용한 비접촉 변압기를 제안하였다. 그리고 제안된 변압기의 공극변화에 따른 인덕턴스 파라미터 변화 및 부하변화에 따른 효율특성을 분석하였다. 컨버터 시스템은 모든 부하에서 높은 효율특성을 갖는 직병렬 공진 컨버터를 사용하였으며, 시뮬레이션을 통하여 그 특성을 분석하였다.

• Composites Research
• /
• v.35 no.6
• /
• pp.463-468
• /
• 2022

The high porosity of the infill pattern of carbon chopped fiber-reinforced Nylon composite structures fabricated by the fused filament fabrication (FFF) type 3D printers determines the mechanical performance of the printed structures. This study experimentally evaluated the mechanical performance of Onyx composite specimens fabricated with a rectangular infill structure under the hot-pressing condition to improve the mechanical properties by reducing the porosity of the infill pattern of the printed structure, and evaluated the best mechanical performance. The hot-pressing conditions (145℃, 4 MPa, 12 min) that induce the most appropriate mechanical properties were found. As a result of microscopic observation, it was confirmed that the infill porosity of the composite specimens subjected to post hot-pressing treatment was effectively reduced. In order to confirm the mechanical performance of the post-treated specimen, a tensile test and a three-point bending test were performed with a control specimen without post-treatment and a specimen printed with the same density and dimensions after post-treatment to evaluate the mechanical properties. As a result of comparison, it was confirmed that the mechanical properties were effectively improved when the post-treatment of hot-pressing was performed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.308-308
• /
• 2017

국내 하천에 설치된 횡단구조물은 2009년을 기준으로 약 20,753개로 알려져 있으며 수위 유지, 하상고 유지 등의 목적을 가지고 설치된다. 그러나 낙차를 가진 빠른 유속의 흐름을 형성시켜, 하류 하상에서 국소 세굴을 발생시킨다. 이를 방지하기 위해 횡단구조물 하류에 굴요성 구조(flexible structure)인 돌망태, 블록공, 사석 등으로 이루어진 바닥보호공(bed protection)이 설치되나 유실, 침하 등의 문제가 빈번히 발생되고 있어, 문제를 해결하기 위한 연구가 필요하다. 본 연구는 이러한 피복 대책에서 일어날 수 있는 파괴 기구인 전단파괴, 흡출 파괴, 경계 파괴, 하상 형태 변화에 따른 하부 침식 중 흡출 파괴(winnowing failure)를 유발하는 흐름을 검토하기 위한 수치모의를 수행하였다. 이때 흡출 파괴는 바닥보호공의 공극으로 미세한 하상 재료가 난류와 침투류의 작용에 의해 침식되어 바닥보호공이 침하되는 것을 말한다. 수치모의는 전산유체동역학(Computational Fluid Dynamics, CFD) 모형인 FLOW-3D 모형을 이용하였으며, 난류 모형으로 LES 모형을 적용하고 조밀한 격자를 부여하여 바닥보호공의 공극에서 발생되는 비교적 작은 척도의 와(vortex)를 해상할 수 있도록 하였다. 수치모의에 적용된 횡단구조물은 보, 물받이공, 바닥보호공으로 구성하였으며 특히, 바닥보호공의 형상은 구체(sphere)로 가정하여 다층으로 배치하였다. 바닥보호공의 공극 또는 구체 사이에서 발생되는 유속, 압력 등의 흐름특성을 분석한 결과, 바닥보호공 두께가 두꺼울수록 흡출 파괴에 대해 안정적인 것으로 나타났다. 이는 바닥보호공 설계를 위한 기초자료로 활용될 수 있으며, 향후 입자영상유속계(Particle Image Velocimeter, PIV)와 같이 공극에서 흐름을 측정할 수 있는 방법과 병행한 연구를 수행할 수 있을 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.1-7
• /
• 2023

A set of foamed concrete specimens with different densities were prepared, and several microscopic techniques, such as scanning electron microscope (SEM) and X-ray micro-computed tomography (micro-CT) were used to characterize the foamed specimens. The pore and solid characteristics of the specimens at different ages were examined to investigate the effect of aging on the materials. The compressive strength and the thermal conductivity of the foamed specimens were also evaluated, and the relationship between the material characteristics and properties was integrated to identify the effect of density and aging on the material properties.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.9-17
• /
• 2019

Cement hydrates and the related characteristics change with ages, and the behaviors are much related with chloride diffusion. In this work, 30% replacement ratio with FA(Fly Ash) and GGBFS(Ground Granulated Blast Furnace Slag) are considered for concrete with three levels of W/B (Water to Binder ratio) and 2 years of curing period. Chloride diffusion coefficients from accelerated condition are obtained at 5 measurement period (28days, 56days, 180days, 365days, and 730days), and the results are compared with porosity, binding capacity, and permeability from program-DUCOM. The similar changing pattern between chloride diffusion and permeability is observed since permeability is proportional to the square of porosity. Curing period is grouped into 4 periods and the changing ratios are investigated. Cement hydrate characteristics such as porosity, permeability, and diffusion coefficient are dominantly changed at the early ages (28~56 days), and diffusion coefficient in OPC concrete with low W/B continuously changes to 180days.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.26-34
• /
• 2013

Durability performance in RC structures varies significantly with changes in cover depth and mix proportions. GGBFS (Ground Granulated Blast Furnace Slag) is very effective mineral admixture and widely used for an improved resistance to chloride attack. In this paper, characteristics such as porosity, compressive strength, and diffusion coefficient are evaluated in GGBFS concrete with 30~70% of replacement ratio and $4,000{\sim}8,000cm^2/g$ of fineness. Through the tests, more dense pore structure, higher compressive strength, and lower diffusion coefficient are obtained in GGBFS concrete, which are evaluated to be more dependent on replacement ratio than fineness. With increasing curing period from 3 to 91 days, porosity decreases to 77.47% and strength increases to 373% in GGBFS concrete. Chloride diffusion coefficient in GGBFS concrete decreases to 64.4% compared with that in OPC concrete, which shows significant improvement of durability performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1215-1225
• /
• 2014

Volcanic rocks formed from magma near the earth surface commonly show vesicular structures due to exsolution of gaseous phases in magma. The distinction and the amount of vesicles are greatly various, but there are few researches on the effect of volume percentage of vesicles on the mechanical properties. In this study, mechanical characteristics of volcanic rocks in relation to the porosity are investigated through experimental tests with Jeju basalt. Two methods (the buoyancy method and the caliper method) are adopted for measuring porosity. And unconfined compressive strength, elastic modulus, tensile strength, and elastic wave velocity are plotted against porosity in order to propose the empirical relations after the regression analysis. Also, unconfined compressive strength and the elastic modulus in relation to the elastic wave velocity are proposed with the analysis. In the case of vesicular rocks with more than 5% porosity, it is found that the buoyancy method provides more accurate estimation of porosity than the caliper method. The unconfined compressive strength, the elastic modulus, and the elastic wave velocity decrease curvilinearly with increasing in porosity. Also, the unconfined compressive strength and the elastic modulus increase linearly with increasing in elastic wave velocity.

• Proceedings of the Speleological Society Conference
• /
• 1994.11a
• /
• pp.80-81
• /
• 1994

카르스트는 특이한 수문학적 용식지형이며, 암석의 높은 용식성으로 인해 발달된 암석의 공극(1차적 삼투)과 암석의 구조적 변형인 절리면, 균렬면, 단층면, 층리면 등(2차적 삼투)의 확장으로 인하여 발생되어진 경관을 총칭한 것이다. 암석의 용식성만으로 카르스트가 형성된다는 것을 실명하기는 쉽지가 않다. 왜냐면 암석의 구조적인 특성이 중요한 인자가 되기 때문이다.(중략)

• Proceedings of the Speleological Society Conference
• /
• 1996.09a
• /
• pp.77-78
• /
• 1996

카르스트는 특이한 수문학적 용식지형이며, 암석의 높은 용식성으로 인해 발달된 암석의 공극(1차적 삼투)과 암석의 구조적 변형인 절리면, 균열면, 단층면, 층리면 등(2차적 삼투)의 확장으로 인하여 발생되어진 경관을 총칭한 것이다. 암석의 용식성만으로 카르스트가 형성된다는 것을 설명하기는 쉽지 않다. 왜냐하면 암석의 구조적인 특성이 중요한 인자이기 때문이다.(중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.207-217
• /
• 2016

Permeability can not be expressed as a function of porosity alone, it depends on the porosity, pore size and distribution, and tortuosity of pore channels in concrete. There has been considerable interest in the relationship between microstructure and transport in cementitious materials, however, it is very rare to deal with the theoretical study on gas permeability coefficient in connection with carbonation of concrete and the effect of volumetric fraction of cement paste or aggregate on the permeability coefficient. The majority of these researches have not dealt with this issue combined with carbonation of concrete, although carbonation can significantly impact on the permeability coefficient of concrete. In this study, fundamental approach to compute gas permeability of (non)carbonated concrete is suggested. For several compositions of cement pastes, the gas permeability coefficient was calculated with the analytical formulation, followed by a microstructure-based model. For carbonated concrete, reduced porosity was calculated and this was used for calculating the gas permeability coefficeint. As the result of calculation of gas permeability for carbonated concrete, carbonation leaded to the significant reduction of gas permeability coefficient and this was obvious for concrete with high w/c ratio. Meanwhile, the relationship between gas permeability and water permeability has a linear function for cement paste based on Klinkenberg effect, however, which is not effective for concrete. For the evidence of the modeling, YOON's test was accomplished and these results were compared to each other.