• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.312-315
• /
• 2005

Visual MODFLOW 프로그램 내 MT3D 패키지를 이용하여 다공 추적자 시험 해석 모델을 제시하였으며, 개념모델을 설정하여 추적자 해석 모델 모사 시 입력상수인 수리전도도(K), 비산출률$(S_y)$, 유효공극률$(n_e)$, 종분산지수$({\alpha}_L)$ 및 횡분산지수$({\alpha}_T)$ 등에 따른 민감도를 분석하였다. 또한, 이를 이용하여 부산과 이천지역의 현장 추적자 시험 자료를 해석하였다. 민감도 분석 결과, 유효공극률과 종분산지수의 민감도가 가장 크게 나타났으며, 비산출률의 민감도가 가장 작게 나타났다. 유효공극률은 관측정에서 측정되는 추적자의 최고농도를 결정하는 인자이며, 종분산지수는 추적자 최고농도가 되는 경과시간과 관계가 깊은 것으로 나타났다. 재순환 추적자 시험 해석 모델을 적용한 부산지역의 경우 유효공극률은 0.15, 종분산지수는 5m인 것으로 모사되었으며, 수렴 흐름 추적자 시험 해석 모델을 적용한 이천지역의 경우 유효공극률은 0.01, 종분산지수는 13m로 산정되었다.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.150-160
• /
• 2017

In order to determine the porosity of rock, the 'standard test method for porosity and density of rock' proposed by the Korean Society for Rock Mechanics is commonly used. However, the standard test method, which uses a drying oven, takes 8 to 24 hours to complete the test in taking samples out of the oven every four hours and measuring the weight of the specimen. To complement these disadvantages, we devised a method for measuring rock porosity by using a microwave oven. The devised method reduced the cause of errors and the inconvenience occurred in the process of weighing samples by constructing a weight monitoring system, which monitors the drying process. A suitable heating/pause time was set up to maintain the temperature of sample below $105{\pm}3^{\circ}C$ in drying process, and an alarm system was implemented in order to stop drying process when the weight change of the rock sample is within 0.1% of the initial weight. The porosity was determined from the dry weight of the sample, which was obtained by the curve fitting of weight monitoring data. Then, the porosities obtained by using the microwave oven were compared with those obtained by the standard test method. Test results using sandstone samples showed that the porosities obtained by a microwave oven was similar to those obtained by the standard method and the porosity difference between two methods was as large as 0.4%. In addition, repeated porosity measurement using the same specimen showed that the standard deviation of the porosity, which reflects the precision of the measurement was as good as 0.23%. Therefore, a microwave oven porosity measurement system can give the porosity of rock samples with high reliability.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.3
• /
• pp.290-297
• /
• 2024

In this study, the gas permeability characteristics according to the construction joint were evaluated under pressure conditions ranging from 0 to 300 psi. The pore distribution and pore ratio were analyzed using X-ray CT. The average porosity of the OPC specimen was 0.74 %, while the FA specimen showed a relatively low pore ratio of 0.51 to 0.65 % regardless of the presence of the construction joint. For the OPC and FA plain specimens with a thickness of 50 mm without construction joints, no gas permeation occurred below 300 psi. At 300 psi, the gas permeation rates of the specimens with rough and smooth construction joint surfaces were 0.28 L/min and 0.31 L/min, respectively, which were 1.7 times higher than those of the specimens without construction joints. This is because the construction joints affected the distribution of the pores and coarse aggregates and the penetration path within the concrete. The porosity in the construction joint was the highest at about 2 %, and it was confirmed that the pore ratio gradually increased as it approached the joint.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.105-109
• /
• 2005

폐기물매립장에서 발생하는 침출수의 확산정도를 정량적으로 추정하기 위해 매립장 주변에 설치되어 있는 2개 지하수공(BWM-1, BWM-2)에서 단공주입양수 추적자시험이 실시되었다. 브롬(Br-) 이온이 추적자로 이용되었으며, 추적자시험은 주입단계, 체이서단계 및 양수단계의 과정으로 실시되었다. 시험대상 구간은 지표면하 $20{\sim}24m$에 해당하는 파쇄암반층이며, 주입율과 양수율은 추적자시험 이전에 실시되어진 양수시험 자료에 의해 산정되었다. BWM-1 지하수공의 단공주입양수 추적자시험에 의해 추정된 종분산지수는 공극율이 0.01, 0.05, 0.1 및 0.5인 경우에 각각 9.50, 4.25, 3.00, 1.34cm 이다. 시험대수층의 공극율은 대략 $0.05{\sim}0.20$의 범위이며, 따라서 종분산지수는 $2{\sim}4cm$인 것으로 추정된다. BWM-2 지하수공의 단공주입양수 추적자시험에 의해 추정된 종분산지수는 공극율 0.01, 0.05, 0.1 및 0.5인 경우에 각각 3.32, 1.49, 1.05, 0.47cm 이다. 시험대수층의 공극율은 대략 $0.05{\sim}0.20$의 범위이며, 따라서 종분산지수는 $1{\sim}2cm$인 것으로 추정된다. 폐기물매립장에서 침출수가 유출할 경우, BWM-2 지하수공 주변의 파쇄암반층이 BWM-1 지하수공 주변의 파쇄암반층보다 침출수 확산이 2배 정도 빠르게 발생할 것으로 추정되었다.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.163-176
• /
• 2012

Effective porosity has been measured for cement specimen as a function of vacuum time and pressure in the vacuum saturation process. Six cement specimen are used; three of them are made of the same ratio of cement and sand, the other three are 100% cement mortar, of which average porosity is about 25% and 40%, respectively. Using the 6 samples, measured effective porosities are compared and examined with 5 different vacuum pressures (2, 4, 6, 8, 10 torr) and times (20, 40, 60, 80, 100 minute), respectively. Comparing measured effective porosity from experiments when vacuum time varies from 100 minute to 20 minute with 20 minute step and vacuum pressure is fixed to 10, 6, and 2 torr, average deviation decreases as 0.6, 0.5, and 0.2% respectively. Comparing measured effective porosity from experiments when vacuum pressure varies from 2 torr to 10 torr with 2 torr step and vacuum time is fixed to 100, 60, and 20 minute, average deviation increases as vacuum time decreases. These results can be a background of suggested method of ISRM that describes the vacuum time longer than 60 minute and vacuum pressure higher than 6 torr. In this study, only qualitative discussion can be possible for the effects on the effective porosity by decreasing 20 minute vacuuming time at the same pressure or by decreasing 2 torr of vacuum pressure at the same vacuum time. This is because the sample could not reached to perfectly dried condition even though the sample were dried at $105^{\circ}C$ and following the ISRM suggested method, so that initial water content could not be the same at each experiment.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1057-1058
• /
• 2008

철도차량용 선형추진시스템에 있어서, 지상레일에 설치되는 선형유도전동기의 2차측의 리액션플레이트의 시공 공차에 의해서 발생되는 1차측과의 공극의 변화는 추진 시스템의 운행 시 승차감과 기기효율을 떨어뜨리는 결과를 초래하기 때문에 선형유도전동기의 균일 공극 운전은 추진 시스템의 효율을 증가시킬 수 있는 중요한 사항이다. 또한 경사구간에서의 선형유도전동기의 공극길이 조절을 통해서 선형유도 전동기의 용량 변경 없이 추력을 증가시키는 것이 가능하다. 따라서 본 논문에서는 선형유도전동기의 공극 길이를 제어할 수 있으며, 공극 길이제어를 통하여 추진 시스템의 성능 변화를 살펴볼 수 있는 축소 모델선형유도전동기 성능시험기의 공극조절 시스템의 동적 모델링 및 특성 해석을 통하여 시스템을 구성하는 파라미터들의 특성 변화 분석 및 시스템 구현 가능성에 대한 연구를 수행하였다.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.328-337
• /
• 2009

To investigate the relation between pore fluid conductivity and bulk resistivity of a rock sample it is assumed that electrolyte solution perfectly substitute the pore fluid that occupied the pore space within the sample in general. In this study, it is investigated that how much can the electrolyte solution substitute the pore fluid by repeating the same saturation process. Four kinds of NaCl solutions of 8, 160, 3200, 64000 ${\mu}S$/cm are used. The saturation process has repeated four times for each electrolyte in increasing conductivity order first then four times each in decreasing order. The more the saturation process repeated with the same electrolyte, the more electrolyte solution substitute the pore fluid. Geometric mean of bulk resistivity in increasing and decreasing orders with the same electrolyte solution is assumed to be mostly close to the bulk resistivity with perfect substitution. Bulk resistivity measurements for both increasing and decreasing order differs within 10% to the geometric mean when repeating the saturation process 4 times while maximum 40% difference is observed when single saturation process for each electrolyte solution with increasing order. The modified parallel resistant model can generally represent the relations between pore fluid resistivity and bulk resistivity in the experiment, but more experimental data with various rock samples with different porosity is needed to generalize the model.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.3
• /
• pp.187-194
• /
• 2005

This paper deals with a waterproof and mechanical feature of concrete using an inorganic self waterproof agent. The waterproof agents having been used in our country were a membrane agent, penetration agent and an organic waterproof agent. However, these agents have a lot of problems such as losing the effect of waterproof in the environment of lots of water, the difficulty of dispersion. For the clear of problems of these water -proof agents, we used the inorganic waterproof agent. This agent was made from inorganic fluosilicate. Generally, a waterproof agent has been used only for the waterproof effect. In this paper, however through the some tests of concrete using the inorganic self waterproof agent, we recognized that the concrete using the agent is more excellent in some peculiar properties than general concrete's properties. In this paper, we performed compressive strength, permeability, pore volume test, etc. As a result, the concrete of using the agent is more excellent in economy, waterproof, compressive strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.67-74
• /
• 2015

In this study, effects of micropores on the freezing-thawing resistance of high volume slag concrete are reviewed. Concrete was made with slag which contains the ground granulated blast furnace slag(GGBS) and the pig iron preliminary treatment slag(PS) by replacing 0, 40, 70 %, then compressive strength, freezing-thawing resistance, micropores were reviewed. Also, specified design strength, target air contents were set. Deterioration was induced by using 14-day-age specimen which has low compressive strength for evaluating deterioration by freeze-thawing action. As results of the experiment, despite of specified design strength which has been set similarly and ensured target air contents, the pore size distribution of the concrete showed different results. Micropores in GGBS70 specimen have small amount of water which is likely to freeze because there is small amount of pore volume of 10~100 nm size at 0 cycle which has not been influenced by freezing-thawing. For these reasons, it was confirmed that the freezing-thawing resistance performance of GGBS70 is significantly superior than other specimens because relatively small expansion pressure is generated compared to the other specimens.