• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.745-753
• /
• 2021

Recently, a large fire occurred in a multi-use facility used by a large number of citizens, including the vulnerable, resulting in a lot of injuries and damages. Although several pilot studies have been conducted to reduce such incidents, the development of advanced disaster response technology using the latest spatial information and IoT technology is still insufficient. In this study, a pilot test bed is built to demonstrate detailed technologies derived through the first stage of realistic fire management technology research for the development of applied technology in the field. In detail, the building conditions and candidate sites of the test bed were first investigated and analyzed to derive satisfactory conditions and candidate target buildings. A second pilot test bed was then selected, and the necessary sensor and facility infrastructure were built to demonstrate the outcomes. Finally, a scenario was produced for technology verification, and a test bed system was developed. The pilot test bed is expected to contribute to verifying intermediate outcomes of realistic fire management research projects, enhancing the quality of the developed technologies.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.159-174
• /
• 2017

The long-term imbalances between supply and demand in office market can weaken urban growth since excessive supply of offices led to office market instability and excessive demand of offices weakens growth of urban industry. Recently, there have been a lot of new large-scale supplies, which increased volatility in Seoul office market. Nevertheless, new supply of Seoul office has not been fully examined. Given this, the focus of this article was on confirming the influences of profitability, replacement cost, and demand on new office supplies in Seoul. In examining those influences, another focus was on their relative influences over time. For these purposes, we analyzed quarterly data of Seoul office market between 2003 and 2015 using a vector error correction model (VECM). As a result, in terms of the influences on the current new supply, the impact of supply before the first quarter was negative, while that of office employment before the first quarter was positive. Also, that of interest rate before the second quarter was positive, while those of cap rate before the first quarter and cap rate before the second quarter were negative. Based on the findings, it is suggested that prediction models on Seoul offices need to be developed considering the influences of profitability, replacement cost, and demand on new office supplies in Seoul.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.86-96
• /
• 2012

Recently parks and green spaces contribute not only as a place of leisure but also for environmental welfare, social education, new jobs and $CO_2$ Emissions Reduction. Parks and green spaces are understood as urban infrastructures like roads and rivers. They are also included in social infrastructures like education, culture, and welfare facilities. These changes are applied to policies for parks and green spaces, many governments and local authorities make investments on them. The modification of policies for parks and green spaces in England is a good example about this trend From this view point, this study now deals with the changing process of policies, results, and evaluation. Some implications have been deducted. The first is the inducement in participation in policies and implementation of practices through policy papers. They are more practical than written laws which are composed of abstract sentences and generalizations. Secondly, the status of parks and green spaces is highly raised with the establishment of CABE Space and so on. This organization controls many different policies and programs related to parks and green spaces. Third is the funding for the improvement of parks and green spaces. Fourth, are the short-term measures, such as funding and management, and the long-term measures such as pursuing building of partnership and training. Fifth, the government strives to establish its partnership with the local authorities and communities through a spectrum of support in terms of information, monitoring, and developing good practices among networks. Finally, parks and green spaces are being addressed from multiple directions through the participation of numerous agents like voluntary groups, development companies, communities and so on. Recently, in Korea, the influences of the Sunset Law for Park Site, Landscape Architecture Law, Urban Forest Law, and other related ordinances have encouraged the review on the policies on parks and green spaces needed. However, there are not many studies about them. Owing to these reasons, the cases of England will he helpful.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.295-302
• /
• 2011

Ubiquitous is an information communication environment which peoples could connect on network without being conscious of the network and computer condition at anytime and anywhere. Presently, advanced technology, digital cities and eco-friendly cities using Ubiquitous technology are being focused through out the world. As recent information industry and communication technology have developed remarkably, studies on intelligent structures and structural maintenance methods by combining a general idea of connecting all objects on network by interpolating computers which is called Ubiquitous Computing, and USN(Ubiquitous Sensor Network) are being attempted. In this paper, a basic experiment on penetration of RF(Radio Frequency) sensor nodes using an experimental sample setting concrete and reinforcing bar as variables is studied to estimate the possibility of applying wireless sensor networks in structures. The spring of reinforcing bars, concrete thickness, intensity of radio frequency were set up as variables, transmitting and receiving distance were checked vertically and horizontally. Moreover, Spectrum Analyzer was used for checking the magnitude of the frequency used in order to measure the reduction of radio wave exactly. The radio wave reduction was numerically analyzed, and the influence of the wavelength was analysed as well. As a result, the penetration depth in concrete without reinforcing bars was 45cm, and in reinforced concretes which reinforcing bars placed at spacing of 5cm and 15cm, the penetration depth were 37cm and 45cm each. No influence on radio wave penetration depth were found when the spacing of reinforcing bars in the reinforced concrete structures becomes over 15cm.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.2
• /
• pp.235-246
• /
• 2023

In this paper, we propose suggestions for developing a Metaverse platform for educational purpose utilizing a Delphi study method with experts on Metaverse and digital education. 17 experts participated in the 1st study and 16 took part in the 2nd study, and data was collected via emails from January 5th to 10th for the 1st study and from January 12th to 17th for the 2nd study in 2022. Collected data in the 1st study was analyzed by applying content analysis. The results for the 1st study indicated that there were 120 sub-factors were derived from 7 main questions(the necessity of a Metaverse platform for future education, how to use the Metaverse platform for education to improve the capacities needed for future human resources, problems that may arise during education using the Metaverse platform, the functions that the Metaverse platform for education should have, the infrastructure and environment required when using the Metaverse platform for education, how to use the Metaverse effectively as a learning space, subjects and educational contents that will be effective if conducted on the Metaverse platform for education). The results for the 2nd study were presented by being ranked with calculated means of sub-factors for each question. Finally, based on the results, suggestions for building a Metaverse platform for educational purpose are stated and limitations of the study and possible future study are discussed.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.483-494
• /
• 2023

Measurement of the physical properties of rocks or minerals is an important factor in determining the distribution of the underground medium as well as mineral resource investigations. Resistivity and induced polarization, which are widely used in Korea, are methods for measuring electrical properties, which are representative properties of obtaining subsurface information. In order to precisely analyze the exploration data obtained from various sites, it is important to accurately measure the material properties. Electrical properties of rock is measured using two-electrode or four-electrode method. Compared to the four-electrode method, the two-electrode method is generally used because it is very easy to contact the sample and the electrode, but there is a problem in that the impedance of the electrode and the sample is measured together. In this study, the time-domain the induced polarization effects were measured using the 2-electrode method and the 4-electrode method for artificial samples mixed with graphite and cement having induced polarization characteristics, and the results were compared. Although the 4-electrode method has difficulties in installing potential electrodes, it was confirmed that it is effective in measuring electrical properties because it can reduce the problem caused by the impedance of potential electrodes compared to the 2-electrode method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.73-82
• /
• 2021

Rural roads are the significant infrastructure for developing and managing the rural areas, hence the utilization of the remote sensing datasets for managing the rural roads is necessary for expanding the rural transportation infrastructure and improving the life quality of the rural residents. In this research, the two different methods such as image classification and image segmentation were compared for mapping the rural road based on the given high-resolution satellite image acquired in the rural areas. In the image classification method, the deep learning with the multiple neural networks was employed to the given high-resolution satellite image for generating the object classification map, then the rural roads were mapped by extracting the road objects from the generated object classification map. In the image segmentation method, the multiresolution segmentation was employed to the same satellite image for generating the segment image, then the rural roads were mapped by merging the road objects located on the rural roads on the satellite image. We used the 100 checkpoints for assessing the accuracy of the two rural roads mapped by the different methods and drew the following conclusions. The image segmentation method had the better performance than the image classification method for mapping the rural roads using the give satellite image, because some of the rural roads mapped by the image classification method were not identified due to the miclassification errors occurred in the object classification map, while all of the rural roads mapped by the image segmentation method were identified. However some of the rural roads mapped by the image segmentation method also had the miclassfication errors due to some rural road segments including the non-rural road objects. In future research the object-oriented classification or the convolutional neural networks widely used for detecting the precise objects from the image sources would be used for improving the accuracy of the rural roads using the high-resolution satellite image.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.939-951
• /
• 2022

The most important factor in designing autonomous driving systems is to recognize the exact location of the vehicle within the surrounding environment. To date, various sensors and navigation systems have been used for autonomous driving systems; however, all have limitations. Therefore, the need for high-definition (HD) maps that provide high-precision infrastructure information for safe and convenient autonomous driving is increasing. HD maps are drawn using three-dimensional point cloud data acquired through a mobile mapping system (MMS). However, this process requires manual work due to the large numbers of points and drawing layers, increasing the cost and effort associated with HD mapping. The objective of this study was to improve the efficiency of HD mapping by segmenting semantic information in an MMS point cloud into six classes: roads, curbs, sidewalks, medians, lanes, and other elements. Segmentation was performed using various machine learning techniques including random forest (RF), support vector machine (SVM), k-nearest neighbor (KNN), and gradient-boosting machine (GBM), and 11 variables including geometry, color, intensity, and other road design features. MMS point cloud data for a 130-m section of a five-lane road near Minam Station in Busan, were used to evaluate the segmentation models; the average F1 scores of the models were 95.43% for RF, 92.1% for SVM, 91.05% for GBM, and 82.63% for KNN. The RF model showed the best segmentation performance, with F1 scores of 99.3%, 95.5%, 94.5%, 93.5%, and 90.1% for roads, sidewalks, curbs, medians, and lanes, respectively. The variable importance results of the RF model showed high mean decrease accuracy and mean decrease gini for XY dist. and Z dist. variables related to road design, respectively. Thus, variables related to road design contributed significantly to the segmentation of semantic information. The results of this study demonstrate the applicability of segmentation of MMS point cloud data based on machine learning, and will help to reduce the cost and effort associated with HD mapping.

• 한국벤처창업학회:학술대회논문집
• /
• 2017.04a
• /
• pp.57-57
• /
• 2017

최근 들어 대학 내 창업교육은 정부 및 공공, 지방자치단체 등의 관심과 지원으로 급격히 확산되고 있다. 교양 및 전공분야의 다양한 창업교육 강좌 및 창업 친화적 학사제도 등 인프라 및 환경적 요인도 충분해졌다고 할 수 있다. 하지만, 그럼에도 불구하고 아직까지 양질의 창업교육 콘텐츠 및 교수법, 교수 역량 활성화, 지역 및 대학 간 편차 해소 등 질적인 부분에 있어서는 새로운 변화와 보완이 필요하다고 할 수 있겠다. 이에 본 연구는 대학 내 교수자, 교직원, 학생들이 손쉽게 접근하고 활용할 수 있는 온라인 창업교육 플랫폼 구축을 통해 대학 창업교육의 질적 고도화 방안을 제시하고자 한다. 아울러 본 연구를 통해 수도권과 지역 대학 간 발생하고 있는 창업교육의 편차를 해소하고 질 좋은 창업교육 운영 및 콘텐츠 지원을 위한 체계적인 온라인 창업교육 시스템 구성 체계 및 기능, 활용방안, 기대효과 등을 제언하고자 한다. 본 연구는 대학에서 운영하고 있는 창업 교육 관리시스템을 개발하기 위해서 시스템 개발의 기본 방향을 설정하고, 그에 따른 정보화교육 관리시스템에 대한 준수하여야 할 기본 설계 방향을 설정할 것이다. 구조적 개발 방법론을 적용하여 시스템의 기능적 요구사항을 도출하고, 시스템 요구를 만족시킬 수 있도록 설정한 시스템의 주요 기능에 대하여 기술할 것이며, 개발해야 할 된 시스템의 구성도 및 시스템 운영 시 필요한 하드웨어 소프트웨어 제반 운영환경에 대하여 논의하고자 한다. 온라인 창업교육플랫폼을 개발함에 있어 가장 우선 검토해야 할 요건은 창업교육과정을 원하는 학생들과 교강사가 플랫폼에 간단하게 접근할 수 있도록 하는 것이다. 또한 교 강사들이 언제든 플랫폼을 통하여 시스템에 접근하여 학생의 교육과정 내용과 진도사항, 창업 관련 자료에 대하여 제공 받을 수 있도록 하며, 학생들이 교강사에게 멘토링 받고 싶은 내용이 있다면 플랫폼을 통해 멘토링이 가능하여야 할 것이다. 본 연구를 통하여 개발하는 온라인 창업 교육 플랫폼은 관리자, 학생, 교강사 등 구성원들의 요구사항을 청취하고, 이들의 요구를 정확히 분석하여 구성원들의 불편함을 해소할 수 있도록 개발하고자 한다. 플랫폼의 구성요소는 첫째, 온라인 창업 교육 플랫폼은 온라인 기반으로 구성하여 교강사와 학생들이 교육의 효율성을 위하여 공동으로 사용할 수 있는 사이트 공간을 제공할 필요가 있다. 둘째, 온라인 창업 교육 플랫폼의 주된 이용자는 창업 교육을 받는 학생과 창업교육을 하는 교 강사도 이를 관리하기 위한 전체 및 지역별 운영관리자도 존재해야 할 것이다. 셋째, 창업교육에 참여하 학생 및 교강사들의 컴퓨터 활용도의 차이가 있을 수 있을 것이다. 플랫폼은 비주얼하게 개발하여 학생 및 교강사가 쉽고, 부담 없이 접근할 수 있는 이용자 인터페이스를 채택해야 하며, 아울러 이해하기 쉬운 메뉴와 간결하게 구현해서 제공할 필요가 있으며, 이것은 온라인 창업교육 플랫폼 사용의 효율성을 제공하는 것이다. 학생들에게는 플랫폼 통하여 자신들의 창업 능력을 배양하여 학습에 도움이 되어야 하며, 교강사에게는 언제든 실시간으로 최신의 정보를 제공함으로써 플랫폼에 대한 신뢰성이 확보 될 수 있도록 설계 되어야만 창업교육의 효과를 극대화 할 수 있으며, 대학 등에서는 보다 안정적인 학생 관리에 최선을 다 할 수 있을 것이다.