• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.147.2-147.2
• /
• 2012

보현산 천문대 1.8m 망원경과 2K CCD를 이용하여 늙은 산개성단 NGC 2420에 대해 V ~ 22까지 VI측광 관측을 수행하였다. Chi^2 최소화를 이용한 정밀한 이론적인 등연령 곡선 맞추기 방법으로 성단의 기본 물리량을 구하고, 색-등급도(CMD)와 공간상에서의 별들의 위치를 이용하여 별들의 통계적인 구성원 확률을 결정하고자 한다. 한편 쌍성의 공간상의 분포를 조사하여 역학적 진화에 따른 쌍성의 분포특징을 살펴보고, 2차원 표면개수 밀도 분포로부터 성단의 형태를 조사하여 우리 은하면과의 상관관계에 대해 논의하고자 한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.3
• /
• pp.99-106
• /
• 2019

Technology that cannot be excluded from 4th industry is self-driving sector. The self-driving sector can be seen as a key set of technologies in the fourth industry, especially in the DB sector is getting more and more popular as a business. The DB, which was previously produced and managed in two dimensions, is now evolving into three dimensions. Among the data obtained by Mobile Mapping System () to produce the HD MAP necessary for self-driving, Point Cloud, which is LiDAR data, is used as a DB because it contains accurate location information. However, at present, it is not widely used as a base data for 3D modeling in addition to HD MAP production. In this study, MMS Point Cloud was used to extract facilities around the road and to overlay the location to expand the usability of Point Cloud. Building utility poles and communication poles DB from Point Cloud and comparing road name address base and location, it is believed that the accuracy of the location of the facility DB extracted from Point Cloud is also higher than the basic road name address of the road, It is necessary to study the expansion of the facility field sufficiently.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.169-174
• /
• 2019

Flexure joints are recently used in the ultra-precision mechanism for a telecommunication mirror stage. Flexure joints have several advantages coming from their monolithic characteristics. They can be used to reduce the size of manipulators or to increase the precision of motion. In our research, 6 dof(degree of freedom) mechanism is suggested for micrometer repeatability using a flexure mechanism. To design the 6-dof motion, the 2-dof planar mechanism are designed and assembled to make the 6-dof motion. To achieve a certain performance, it is necessary to define the performance of mechanism that quantifies the characteristics of flexure joints. This paper addresses the analysis and design of the 6-dof parallel manipulator with a flexure joint using a finite element analysis tool. To obtain experimental result, CCD laser displacement sensor is used for the total displacement and the stiffness for the 6-dof flexure mechanism.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.6
• /
• pp.643-653
• /
• 2020

The concrete lining inspection by inspector after traffic control poses various problems such as congestion caused by traffic control and social loss costs resulting from it, and risks of traffic accidents and safety accidents for inspectors et al. To solve the problems, the concrete lining inspection has been carried out using automatic inspection equipment and image analysis that can be objectively and quantitatively investigated in overseas. In this study, to solve the problems of concrete lining inspection by inspector and to review improvement plan for inspection, inspection was carried out using automatic inspection equipment for ◯◯ tunnel that precision safety diagnosis has been conducted in 2019. Analysis was carried out for both inspection results. Automatic inspection equipment investigated defects in concrete lining such as cracks more accurately than precision safety diagnosis.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.125-132
• /
• 2017

Even after applying an image registration, Very High Resolution (VHR) multi-temporal images acquired from different optical satellite sensors such as IKONOS, QuickBird, and Kompsat-2 show a local misalignment due to dissimilarities in sensor properties and acquisition conditions. As the local misalignment, also referred to as Registration Noise (RN), is likely to have a negative impact on multi-temporal information extraction, detecting and reducing the RN can improve the multi-temporal image processing performance. In this paper, an approach to fine registration between VHR multi-temporal images by considering local distribution of RN is proposed. Since the dominant RN mainly exists along boundaries of objects, we use edge information in high frequency regions to identify it. In order to validate the proposed approach, datasets are built from VHR multi-temporal images acquired by optical satellite sensors. Both qualitative and quantitative assessments confirm the effectiveness of the proposed RN-based fine registration approach compared to the manual registration.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.9
• /
• pp.35-47
• /
• 2017

Recently, the 3D image of the geotechnical information has been constructed along with the 3D integrated underground space mapping project. Prior to the visualization of the 3D image of the geotechnical information, it is necessary to analyze and verify the accuracy of the geotechnical information. Previous studies evaluated the precision of collected geotechnical information DB to validate the quality of the collected DB and later studies on the 3D precision were performed to provide the basic data for the 3D integrated underground space map. In this study, practical application methodologies are suggested based on the previous studies to improve the accuracy of the applied geotechnical information and further to improve the reliability of the constructed 3D integrated underground space map.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.215-220
• /
• 2004

유역수문모형에서 SCS방법 적용시 입력되는 주요 매개변수인 유역평균 CN값은 RS와 GIS를 적용하면 쉽게 계산이 가능하나, 입력자료의 종류 및 공간해상도의 선택에 따라 같은 자료일 지라도 다르게 계산된다. 본 연구에서는 Landsat 7 ETM+,SPOT 5, 1:25,000 토지이용현황도, 정밀토양도, 개략토양도를 이용하여 2.5m, 30m 공간해상토의 자료로부터 유역평균CN을 계산하였으며, 이들을 각각 2.5m～1000m 크기의 격자로 재배열하여 유역평균을 비교함으로서 해상도가 유역 CN값 변화와 어떠한 관계가 있는지 분석하고자 하였다. 분석결과 해상도에 따라 일정구간 이상에 대하여 오차를 나타내고 있었으며, 자료의 선택에 따라 유역평균 CN 값의 변화가 있는 것으로 분석되었다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.501-506
• /
• 2002

논에 있어서 정밀농업을 위한 기초자료수집과 분석을 하기 위해서 포장정보를 조사한 결과 아래와 같은 결과를 얻었다. 가. 포장정보의 변이계수를 살펴보면 5.70∼51.3%로서 논 포장에 있어서도 큰 공간변이를 보였다. 토양의 전기전도도는 28.1∼40.4%를 보였으며, 생육정보는 5.70∼23.19%를 보였다. 포장면 고저차는 51.3%로서 가장 큰 변이를 나타내었다. 수량도 22.5%를 보였으며, 단백질과 아밀로스 등 벼 품질에 있어서도 9.21%와 9.35%를 보였다. 나. 포장조사에서 얻어진 포장정보를 공간통계학적으로 해석한 결과, 포장정보별로 약간의 차이는 있었지만, 약 8∼60m정도에서 공간의존성이 존재함을 알 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.15-17
• /
• 2021

사물인터넷 등, ICT 기술을 활용하여 현실의 공간으로부터 수집된 정보를 초정밀 가상 공간정보 기술과 융복합하여 제공하는 디지털 트윈 기술이 대두되고 있다. 이러한 디지털 트윈 기술은 제조, 교통, 에너지, 환경, 의료 등 다양한 현실 세계의 문제를 분석하고 해결하기 위한 기술로 확장되고 있다. 본 논문은 재난 안전, 특히 화재 안전분야에서 디지털 트윈 시스템 적용방안을 제시하는 것을 목적으로 한다. 이를 위해 화재 안전과 관련하여 다양한 센서의 수집 및 융복합처리와 디지털 트윈을 위한 표준중개 변환 방법을 제안하였다. 또한, 센서객체 및 공간 객체 모델링을 통하여 디지털 트윈 공간을 구성하고 수집된 다양한 화재안전정보와 맵핑 및 분석을 수행하는 디지털 트윈 화재 안전시스템을 제안하고, 프로토타입을 개발하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.4
• /
• pp.393-401
• /
• 1999

Non-point source pollution poses a serious threat to river. therefore non-point pollution model was developed. This non-point pollution model requires detailed spatial data for accurate predictions Geo-spatial Information System(GSIS) is well suited to those needs. The parameters for these models provided by the GSIS were slope, slope shape, field slope length and SCS run off curve number. Hence, this study presents an application of GSIS processing tools for AGNPS model developed by the ARS(Agricultural Research Service) in cooperation with the MPCA(Minnesota Pollution Control Agency) and has developed interface that construct the input data of ASCII type in the AGNPS model using GSIS.