• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.403-410
• /
• 2015

The purpose of this study was to investigate the problems of a signal to noise ratio measurement using a two region measurement method that is conventionally used when using a multi-channel coil and a parallel imaging technique. As a research method, after calculating the standard SNR using a single channel head coil of which coil satisfies three preconditions when using a two region measurement method, we made comparisons and evaluations after calculating an SNR by using a two region measurement method of which method is problematic because it is used without considering the methods recommended by reputable organizations and the preconditions at the time of using a multi-channel coil and a parallel imaging technique. We found that a two region measurement method using a multi-channel coil and a parallel imaging technique shows the highest relative standard deviation, and thus shows a low degree of precision. In addition, we found out that the difference of SNR according to ROI location was very high, and thus a spatial noise distribution was not uniform. Also, 95% confidence interval through Blend-Altman plot is the widest, and thus the conformity degree with a two region measurement method using the standard single channel head coil is low. By directly comparing an AAPM method, which serves as a standard of a performance evaluation test of a magnetic resonance imaging device under the same image acquisition conditions, an NEMA method which can accurately determine the noise level in a signal region and the methods recommended by manufacturers of a magnetic resonance imaging device, there is a significance in that we quantitatively verified the inaccurate problems of a signal to noise ratio using a two region measurement method when using a multi-channel coil and a parallel imaging technique of which method does not satisfy the preconditions that researchers could overlook.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.363-373
• /
• 2020

During last decades numerous studies generating orthoimage have been carried out. Traditional methods require exterior orientation parameters of aerial images and precise 3D object modeling data and DTM (Digital Terrain Model) to detect and recover occlusion areas. Furthermore, it is challenging task to automate the complicated process. In this paper, we proposed a new concept of true orthoimage generation using DL (Deep Learning). DL is rapidly used in wide range of fields. In particular, GAN (Generative Adversarial Network) is one of the DL models for various tasks in imaging processing and computer vision. The generator tries to produce results similar to the real images, while discriminator judges fake and real images until the results are satisfied. Such mutually adversarial mechanism improves quality of the results. Experiments were performed using GAN-based Pix2Pix model by utilizing IR (Infrared) orthoimages, intensity from LiDAR data provided by the German Society for Photogrammetry, Remote Sensing and Geoinformation (DGPF) through the ISPRS (International Society for Photogrammetry and Remote Sensing). Two approaches were implemented: (1) One-step training with intensity data and high resolution orthoimages, (2) Recursive training with intensity data and color-coded low resolution intensity images for progressive enhancement of the results. Two methods provided similar quality based on FID (Fréchet Inception Distance) measures. However, if quality of the input data is close to the target image, better results could be obtained by increasing epoch. This paper is an early experimental study for feasibility of DL-based true orthoimage generation and further improvement would be necessary.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.511-525
• /
• 2003

The Okcheon Group in the southwestern part of the Okcheon Metamorphic Belt is subdivided into two distinct tectonostratigraphic units: the Boeun unit in the south and the Pibanryeong unit in the north. The Boeun unit consists of petites, psammites, carbonaceous petites, limestones and pebble-bearing quartzites. The Pibanryeong unit is composed of petites, well-sorted fine-grained psammites, carbonaceous psammites and quartzites. In order to outlining stratigraphy and depositional environments of the Okcheon Group, detailed stratigraphic sections were measured in three locations; one section(Gosan section) of the Boeun unit and two sections(Sorungjae and Hwangryeongzae sections) of the Pibanryeong unit. The Gosan section of the Boeun unit is interpreted to be deposited in the shallow marine environments, whereas the Sorungjae and Hwangryeonaiae sections of the Pibanryeong unit appear to be deposited in slope and deep basin environments. This result indicates rapid subsidence between deposition of the Boeun and Pibanryeong units in sedimentary environment. The trace of sedimentological environments in the Hwasan area was investigated by geochemical analysis of 109 metapelitic and psammitic rock samples. Distinct chemical variations of politic and psammitic rocks from the Boeun and Pibanryeong units in the study area are evident from plots of major elements and $A1_2O_3$/$SiO_2$ versus Basicity Index($Fe_2O_3{＋}MgO$)/($SiO_2{＋}K_2O{＋}Na_2O$). The rocks show a progressive chemical trend from the Boeun unit to the Pibanryeong unit on these diagrams. They in the southern sector of the Boeun unit display lower values and a comparatively wide range of $A1_2O_3$/$SiO_2$ and Basicity Index, as compared with those from the northern sector of the Boeun and Pibanryeong units. The southern sector of the Pibanryeong unit including narrow staurolite-bearing zone is characterized by values that are transitional between the Boeun and Pibanryeong units. These data, combined with depositional environment progressively deepened towards the northwest, support a half-graben model for the Okcheon basin, as proposed by Cluzel et al.(1990)

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.186-193
• /
• 2014

This study aimed to analyze spatio-temporal trends of phenological characteristics in South Korea by using MODIS EVI. For the phenology analysis, we had applied double logistic function to MODIS time-series data. Our results showed that starting date of phenology seems to have a tendency along with latitudinal trends. Starting date of phenology of Jeju Island and Mt. Sobeak went back for 0.38, 0.174 days per year, respectively whereas, Mt. Jiri and Mt. Seolak went forward for 0.32 days, 0.239 days and 0.119 days, respectively. Our results exhibited the fluctuation of plant phonological season rather than the change of phonological timing and season. Starting date of plant phenology by spatial distribution revealed tendency that starting date of mountain area was late, and basin and south foot of mountain was fast. In urban ares such as Seoul metropolitan, Masan, Changwon, Milyang, Daegu and Jeju, the phonological starting date went forward quickly. Pheonoligcal attributes such as starting date and leaf fall in urban areas likely being affected from heat island effect and related warming. Our study expressed that local and regional monitoring on phonological events and changes in Korea would be possible through MODIS data.

• Journal of the Korean earth science society
• /
• v.22 no.4
• /
• pp.278-291
• /
• 2001

Mesothermal gold vein minerals of the Seolhwa mine were deposited in a single stage of massive quartz veins which filled the mainly NE-trending fault shear zones exclusively in the granitoid of the Gyeonggi Massif. The Seolhwa mesothermal gold mineralization is spatially associated with the Jurassic granitoid of 161 Ma. The vein quartz contains three main types of fluid inclusions at 25$^{\circ}$C: 1) low-salinity (< 5 wt.% NaCl), liquid CO$_{2}$-bearing, type IV inclusion; 2) gas-rich (> 70 vol.%), aqueous type II inclusions; 3) aqueous type I inclusions (0${\sim}$15 wt.% NaCl) containing small amounts of CO$_{2}$. The H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl inclusions represent immiscible fluids trapped earlier along the solvurs curve at temperatures from 430$^{\circ}$ to 250$^{\circ}$C and pressures of 1 kbars. Detailed fluid inclusion chronologies may suggest a progressive decrease in pressure during the auriferous mineralization. The aqueous inclusion fluids represent either later fluids evelved through extensive fluid unmixing (CO$_{2}-CH$_{4}$ effervescence) from a homogeneous H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl fluid due to decreases in temperature and pressure, or the influence of deep circulated meteoric waters possibly related to uplift and unloading of the mineralizing suites. The initial fluids were homogeneous containing H$_{2}$O-CO$_{2}-CH$_{4}$-N$_{2}$-NaCl components and the following properties: the initital temperature of >250$^{\circ}$ to 430$^{\circ}$C, X$_{CO}\;_{2}$ of 0.16 to 0.62, 5 to 14 mole% CH$_{4}$, 0.06 to 0.3 mole% N$_{2}$ and salinities of 0.4 to 4.9 wt.% NaCl. The T-X data for the Seolhwa gold mine may suggest that the Seolhwa auriferous hydrothermal system has been probably originated from adjacent granitic melt which facilitated the CH$_{4}$ formation and resulted in a reduced fluid state evidenced by the predominance of pyrrhotite. The dominance of negative ${\delta}\;^{34}$S values of sulfides (-0.6 to 1.4$%_o$o) are consistent with their deep igneous source.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.103-112
• /
• 2011

The purpose of this study is to specify the prior eco-preserve zone by establishing the eco-landscape unit on the stream corridor and evaluating the stream ecosystem in the dam basin. The fundamental ecological data was surveyed and collected through "the ecosystem project on Yongdam multipurpose dam watershed" from 2008 to 2009. The Yongdam Dam Watershed has several streams, Jujacheon, Jeongjacheon and Guryangcheon, of which the area is $930km^2$, stretching to Jinangun, Jangsugun and Mujugun Jellabukdo. In spite of being used for drinking purpose, the dam water quality and ecosystem is threatened by in-watershed pollution produced by development, golf course grounds and sports complex, etc. The landscape unit of stream corridor was zoned across by 250m, 500m, and 750m from the vicinity line of stream, which was decided to the accuracy of mapping and surveying. Types of evaluation are the Stream Corridor Evaluation(SCE) and the Vegetated Area Evaluation(VAE). In the process of SCE, several indices were analysed, fish species diversity, species peculiarity, and stream naturality. Indices for VAE were forest stand map, vegetation protection grade, species diversity and peculiarity for wild bird and mammal life. The importance of the ecological items is categorized into three levels and overlapped for specifying the prior preserve zone. The area at which legally protecting species appeared is categorized as absolute preserve area. This study might be meaningful for proposing the evaluation process of a stream corridor ecosystem, which can synthesize a lot of individual ecological surveys. We hope further research will be actively performed about the ecotope mapping which is based on a individual wildlife territory and habitats and also their relationships.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.147-161
• /
• 2011

Korea is surrounded by sea on three sides. This country has been supplied with a variety of aquaculture products cultivated on shores. There have recently been a lot of studies to have better understanding of the correct location and quantity of aquaculture farms for seaweed, ear shells and fish that cover a wide area of sea. And it is necessary to use the geographic information system and remote sensing to detect the aquaculture farms in order to effectively manage them. This study uses higher resolution aerial images(25 centimeters) than satellite images of 2~2.5-meter resolution that have been ever used, to conduct an accuracy detection of aquaculture farming facilities. It chooses as the case study area the Wando region that has aquaculture farms for seaweed, ear shells and fish. Aerial photos of the island were obtained in this study and an image correction of them was conducted. A spatial database was then constructed in this study and the detection of aquaculture farming facilities was performed. An analysis of facilities inside and outside the permitted areas reveals that there has been an increase in the facilities of seaweed and ear shell aquaculture farms outside the permitted areas. And also it tells that because the facilities of fish aquaculture farms have turned into those of ear shell aquaculture farms, there has been a decrease in permitted facilities, facilities detected on the basis of aerial images, and facilities outside the permitted area. It will be necessary to continuously control and manage the unpermitted facilities, regarding the increase in the facilities inside and outside the permitted area for seaweed and ear shell aquaculture farms. Because the facilities of aquaculture farms cover a wide range of areas(sea) in this manner, it is more effective to depend on high resolution aerial images than a field survey to detect and calculate the facilities. This study comes up with a plan for using aerial images to detect the location and the quantity of the fish aquaculture facilities and then effectively manage them.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.559-568
• /
• 2011

This study aims at listing up those manufacturing activities sensitive to regional characteristics by analyzing locational hierarchy designed on the urban rank-size rule. This locational hierarchy by manufacturing activities is expected to provide a ground for the proper supply of an industrial complex. The analysis of the locational hierarchy by manufacturing activities can work as a method of observing the characteristics of the distribution of location for each economic activity by analyzing the trend in the change of manufacturing location. Consequently, it can be used to determine the appropriate manufacturing activities for the industrial complex of a particular region. Here, the locational hierarchy is analyzed depending on the base of the basic local government such as Gun(district level) and Si(city level), and manufacturing activities are categorized by Korea Standard Industry Code. Those activities demonstrating growth pattern are Manufacture of Electronic Equipment(KSIC 26), Manufacture of Medical Precision Optical Instruments Watch(KSIC 27), Manufacture of Motor Vehicles (KSIC 30, 31), etc. With proper infrastructures, these activities can be located everywhere. Those sectors on the decline pattern in the locational hierarchy can be summarized as Manufacture of Tobacco Products(KSIC 12), Manufacture of wearing apparel Fur Articles(KSIC 14), etc. Those sectors scattered widely in the locational hierarchy are Manufacture of Food Products(KSIC 10), Manufacture of Coke Petroleum Products(KSIC 19), Manufacture of Chemical Products(KSIC 20), Manufacture of Electronic Equipment(KSIC 26). These particular manufacturing activities can be operated in those regions in a sufficient supply of unskilled workers regardless of proper infrastructures. Those activities that have a tendency to reconcentrate on larger cities are Manufacture of Textiles(KSIC 13), Manufacture of Wearing Apparel Clothing Fur Articles(KSIC 14), Manufacture of Other Transport Equiptmen(KSIC 31). In most cases, these sectors tend to favor their existing agglomerated areas and concentrate around large cities. Therefore, it is inefficient to promote these sectors in small or medium-sized cities or underdeveloped regions. The establishment of developmental strategies of an industrial complex can gain greater competitiveness by observing such characteristics of the locational hierarchy.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1329-1340
• /
• 2021

The intertidal zone, which is a transitional zone between the ocean and the land, requires continuous monitoring as various changes occur rapidly due to artificial activity and natural disturbance. Monitoring of coastal topography changes using remote sensing method is evaluated to be effective in overcoming the limitations of intertidal zone accessibility and observing long-term topographic changes in intertidal zone. Most of the existing coastal topographic monitoring studies using remote sensing were conducted through high spatial resolution images such as Landsat and Sentinel. This study extracted the waterline using the NDWI from the GOCI-II (Geostationary Ocean Color Satellite-II) data, identified the changes in the intertidal area in Gyeonggi Bay according to various tidal heights, and examined the utility of DEM generation and topography altitude change observation over a short period of time. GOCI-II (249 scenes), Sentinel-2A/B (39 scenes), Landsat 8 OLI (7 scenes) images were obtained around Gyeonggi Bay from October 8, 2020 to August 16, 2021. If generating intertidal area DEM, Sentinel and Landsat images required at least 3 months to 1 year of data collection, but the GOCI-II satellite was able to generate intertidal area DEM in Gyeonggi Bay using only one day of data according to tidal heights, and the topography altitude was also observed through exposure frequency. When observing coastal topography changes using the GOCI-II satellite, it would be a good idea to detect topography changes early through a short cycle and to accurately interpolate and utilize insufficient spatial resolutions using multi-remote sensing data of high resolution. Based on the above results, it is expected that it will be possible to quickly provide information necessary for the latest topographic map and coastal management of the Korean Peninsula by expanding the research area and developing technologies that can be automatically analyzed and detected.