• Title/Summary/Keyword: 공간영역

Search Result 3,879, Processing Time 0.029 seconds

Study of spatial temperature distribution during combustion process in a high temperature and pressure constant volume chamber (고온 고압 정적 연소실에서 연소과정에 따른 온도 분포 측정)

  • Kim, Ki-hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.1
    • /
    • pp.345-350
    • /
    • 2017
  • Downsizing is widely applied to diesel engines in order to improve fuel efficiency and reduce exhaust emissions. Engine sizes are becoming smaller but pressure and temperature inside combustion chambers are increasing. Therefore, research for fuel spray under high pressure and temperature conditions is important. A constant volume chamber which simulates high temperature and pressure likely to be found in diesel engines was developed in this study. Pressure and temperature were increased abruptly because of ignition of the pre-mixture in the constant volume chamber. Then pressure and temperature were gradually decreased due to the heat loss through the chamber wall. Fuel spray occurred when temperature and pressure were reached at the target condition. In this experiment, the temperature condition should be exactly defined to understand the relation between fuel evaporation and ambient temperature. A fast response thermocouple was developed and used to measure the temporal and spatial temperature distribution during the combustion process inside the combustion chamber. In the results, the core temperature was slightly higher than the bulk temperature calculated by the gas equation. Ed-note: do you want to say 'ideal gas equation'? This was attributed to the heat transfer loss through the chamber wall. The vertical temperature deviation was higher than the horizontal temperature deviation by 5% which resulted from the buoyancy effect.

Study on the Prototype of the Rear Garden in Changdeok Palace through Gang Sehwang's "Record of Strolling with King in the Forbidden Garden" (강세황의 "호가유금원기(扈駕遊禁苑記)"로 살펴본 창덕궁 후원의 원형경관 탐색)

  • Jung, Woo-Jin;Oh, Lee-Chun;Sim, Woo-Kyung
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.31 no.1
    • /
    • pp.87-97
    • /
    • 2013
  • This study was carried out to find the prototype of the rear garden in Changdeok Palace during King Jungjo's reign through Gang Sehwang's "Record of Strolling with King in the Forbidden Garden", and the site of this study included the whole areas of Ongnyucheon(玉流川), Mansongjeong(萬松亭), Mangchunjeong(望春亭), Jondeokjeong(尊德亭), Pyemwoosa and Taichungmun(太淸門). The characteristics of the area of Ongnyucheon described in Record of Strolling with King in the Forbidden Garden was the shape of Wiyiam expressed three-dimensional mountain such as the fence surrounding Soyojeong(逍遙亭) and the painting techniques of Fu Pi' ts'un and pond in front of Taegeukjeong(太極亭). The pond in front of Taegeukjeong(which was described by Gang Sewhang) is also identified in Donggwoldo(東闕圖) and this study judged that the pond was removed during the maintenance process of Ongnyucheon, where was scheduled as the place of entertainment when Chinggyong-Yesik(稱慶禮式: Royal court rites) was held to celebrate the 40th anniversary of King Gojong's reign. The characteristics of the whole area of Mangchunjeong where was the attraction point for flower viewing in the forbidden garden was surrounded by the sculptured fence, and Mangchunjeong which was hexagonal structure was located in the inside of the structure on both sides of the main building. The cornerstone was carved with white jade. Also a corridor assumed as Chunhyanggak(天香閣) was adjacent to Mangchunjeong. Gang Sehwang confirmed the space organization appeared in Donggwoldo by describing the attached building of Pyemwoosa, Taichungmun, and surrounding fence in detail.

A study on the chronology of children's cartoon focused on the character (캐릭터 중심으로 본 어린이 만화연대기 연구)

  • Kim, Byung-Soo
    • Cartoon and Animation Studies
    • /
    • s.16
    • /
    • pp.179-198
    • /
    • 2009
  • This study analyzed the chronology of children's cartoon through character while the children's cartoon section is planned at the Memorial Exhibition of 100th year of Korean Cartoon which will be held at the Contemporary Art Gallery in celebration of the 100th year after birth of Korean Cartoon. The approaching method based on character is regarded as the most proper and feasible in the identification of character and meaning of children's cartoon because the character in cartoon contains the bigger role and meaning than the descriptive structure of narration. The Committee of 100th Year of Korean Cartoon, Aicheorum which is a study association for children's cartoon and Cartoon My Love $Cafe^{42)}$ in Naver jointly selected the 70 cartoon characters. A brief history is established based on these characters through chronological classification in seven sectors of around 10 year session such as before 1950s of quickening period and liberation, 1950s, 1960s, 1970s, 1000s, 1900s and after 2000. It examined the historical meaning, its reflection and characteristics focused on the cartoon character and the cartoonist which were well-known to everybody not only the display according to chronological order. The study intented the stereoscopic illumination on the children's cartoon and character which were favored beyond the generations. In addition, the similarity and human relation among cartoonist to cartoonist and character to character were analyzed and traced to identity the fact that children cartoon character is not individualistic being but it lies on the extension of tradition and trend of eternal cartoon history Finally, hopefully it will make a contribution to activate the pure creative children's cartoon in Korea through reminding the importance of character in cartoon, affirming the industrial value and reflecting the direction and perspective of pure creative children's cartoon.

  • PDF

The Analysis of Effect of Surface Shape and Pattern of Noise Barrier Panel on the Noise Reduction (방음벽 전면형상에 따른 소음 효과 분석에 관한 연구)

  • Kim, IlHo;Ahn, Hosang;Park, Jong-Bin;Kim, Gwang Soo;Lee, Ju Haeng;Ko, Junhee
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.12
    • /
    • pp.835-839
    • /
    • 2012
  • In recent decades, a lot of noise barriers have been installed along paved road in order to reduce the road induced noise, which increases as traffic volume grows. For better range of sight, transparent noise barriers are widely installed despite of reflecting noise. In this study, the effect of surface shape and pattern of noise barriers on the reduction of reflecting noise was analyzed to maximize the noise reduction. According to the number of shape and pattern, it was observed that there were noise reduction effect as of 0.9~1.5 dB(A). It was found that the spatial field where the noise concentrates or disperses changes according to the width of blocks on the barriers as well. It suggests that there might be possibility of surface shape modification to optimize the noise reduction technology.

Toward an Evaluation Framework of Library Services: Re-examination of LibQUAL+TM (도서관 서비스 품질평가 도구로서 LibQUAL+TM에 대한 재평가)

  • Park, Ji-Hong
    • Journal of the Korean Society for information Management
    • /
    • v.24 no.2
    • /
    • pp.5-27
    • /
    • 2007
  • While $LibQUAL+^{TM}$ is in the headlines of many articles focusing on library service evaluations, little research has been conducted to study the relationship between the $LibQUAL+^{TM}$ factors and the adoption of library services. It remains unclear whether the factors of $LibQUAL+^{TM}$ have any effect on its adoption. A framework was adapted from Icek Ajzen's theory of planned behavior and proposed to extract factors affecting the adoption of library services. The factors were examined via data collection from a Web-based questionnaire survey with college students in the United States. Factor analyses and multiple regression analysis were conducted. Findings show that the intention to use library services is explained by attitude toward library service quality. The attitudinal factors that are significant are (1) perceived personal control, (2) perceived affect of service, and (3) perceived comprehensiveness of information. The relative importance among the factors is also represented by the numbered sequence. However, perceived timeliness of information access and the perception of library as place do not have a significant effect on the intention. This study extends the research on library service evaluation, and provides a new evaluation framework by applying adoption behaviors.

DTN Routing Method using Spatial Regularity in Urban Area (도시 환경에서 지역적 주기성을 이용한 DTN 라우팅 기법)

  • Jeong, Jae-Seong;Lee, Kyung-Han;Lee, Joo-Hyun;Chong, Song
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.6A
    • /
    • pp.609-616
    • /
    • 2011
  • The Delay/Disruption Tolerant Network (DTN) is a network designed to operate effectively using the mobility and storage of intermediate nodes under no end-to-end guaranteed network. This new network paradigm is well-suited for networks which have unstable path and long latencies (e.g. interplanetary network, vehicular network). In this paper, we first found that each taxi has its own regularly visiting area and define this property as spatial regularity. We analyze 4000 taxi trace data in Shanghai and show the existence of spatial regularity experimentally. Based on a spatial regularity in urban environment, we present a new DTN routing method. We introduce a Weighted Center (WC) which represents spatial regularity of each node. Through the association with evenly distributed access points (APs) in urban environment, most of vehicles get their grid locations and calculate their WCs. Since our routing method only uses neighbors' WCs for building routing paths, it can be regarded as distributed and practical protocols. Our experiments involving realistic network scenarios created by the traces of about 1500 Shanghai taxies show that our routing method achieves the higher performance compared to ECT, LET by 10%~110%.

A Study on the quantitative measurement methods of MRTD and prediction of detection distance for Infrared surveillance equipments in military (군용 열영상장비 최소분해가능온도차의 정량적 측정 방법 및 탐지거리 예측에 관한 연구)

  • Jung, Yeong-Tak;Lim, Jae-Seong;Lee, Ji-Hyeok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.5
    • /
    • pp.557-564
    • /
    • 2017
  • The purpose of the thermal imaging observation device mounted on the K's tank in the Republic of Korea military is to convert infrared rays into visual information to provide information about the environment under conditions of restricted visibility. Among the various performance indicators of thermal observation devices, such as the view, magnification, resolution, MTF, NETD, and Minimum Resolvable Temperature Difference (MRTD), the MRTD is the most important, because it can indicate both the spatial frequency and temperature resolvable. However, the standard method of measuring the MRTD in NATO contains many subjective factors. As the measurement result can vary depending on subjective factors such as the human eye, metal condition and measurement conditions, the MRTD obtained is not stable. In this study, these qualitative MRTD measurement systems are converted into quantitative indicators based on a gray scale using imaging processing. By converting the average of the gray scale differences of the black and white images into the MRTD, the mean values can be used to determine whether the performance requirements required by the defense specification are met. The (mean) value can also be used to discriminate between detection, recognition and identification and the detectable distance of the thermal equipment can be analyzed under various environmental conditions, such as altostratus, heavy rain and fog.

An experimental study on the smoke-spread region before reaching the critical velocity for the case of fires in tunnels employing longitudinal ventilation system (종류식 환기 시스템에서 임계속도 도달 전 스모크 확산 영역에 관한 실험적 연구)

  • Ki, Young-Min;Yoon, Sung-Wook;Yoon, Chan-Hoon;Kim, Jin
    • Tunnel and Underground Space
    • /
    • v.16 no.6 s.65
    • /
    • pp.526-535
    • /
    • 2006
  • An experimental study was carried out on a reduced scale tunnel model to grasp the behavioral feature of fire-induced smoke in the long tunnels. Based on Froude modeling, the 1/50 scaled tunnel model (20 m long) was constructed by acrylic tubes and paraffin gas was released inside the tunnel to simulate the 20 MW fire-induced smoke. me test results show, that after approximately 2 minutes of fire generation, was descended from the tunnel ceiling through the decrease of buoyancy, then it was symmetrically propagated about 90 meters for 4 minutes before jet fans were operated. The smoke was effectively controlled when the jet fans were operated and an air stream velocity was getting closed to reach a critical velocity (the minimum air velocity that requires to suppress the smoke spreading against the longitudinal ventilation flow during the tunnel fire situations). It was also found out that a range of smoke was spreaded about 3 meters from the origin of fire but the range was not propagated to the escape direction anymore. The early stage of the In operation, however, showed that the smoke was hardly controlled. It means that the operation of emergency ventilation system has many dangerous factors such as an intercepting breathing zone.

Generation of Multi-view Images Using Depth Map Decomposition and Edge Smoothing (깊이맵의 정보 분해와 경계 평탄 필터링을 이용한 다시점 영상 생성 방법)

  • Kim, Sung-Yeol;Lee, Sang-Beom;Kim, Yoo-Kyung;Ho, Yo-Sung
    • Journal of Broadcast Engineering
    • /
    • v.11 no.4 s.33
    • /
    • pp.471-482
    • /
    • 2006
  • In this paper, we propose a new scheme to generate multi-view images utilizing depth map decomposition and adaptive edge smoothing. After carrying out smooth filtering based on an adaptive window size to regions of edges in the depth map, we decompose the smoothed depth map into four types of images: regular mesh, object boundary, feature point, and number-of-layer images. Then, we generate 3-D scenes from the decomposed images using a 3-D mesh triangulation technique. Finally, we extract multi-view images from the reconstructed 3-D scenes by changing the position of a virtual camera in the 3-D space. Experimental results show that our scheme generates multi-view images successfully by minimizing a rubber-sheet problem using edge smoothing, and renders consecutive 3-D scenes in real time through information decomposition of depth maps. In addition, the proposed scheme can be used for 3-D applications that need the depth information, such as depth keying, since we can preserve the depth data unlike the previous unsymmetric filtering method.

Dimensionality Reduction Methods Analysis of Hyperspectral Imagery for Unsupervised Change Detection of Multi-sensor Images (이종 영상 간의 무감독 변화탐지를 위한 초분광 영상의 차원 축소 방법 분석)

  • PARK, Hong-Lyun;PARK, Wan-Yong;PARK, Hyun-Chun;CHOI, Seok-Keun;CHOI, Jae-Wan;IM, Hon-Ryang
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.22 no.4
    • /
    • pp.1-11
    • /
    • 2019
  • With the development of remote sensing sensor technology, it has become possible to acquire satellite images with various spectral information. In particular, since the hyperspectral image is composed of continuous and narrow spectral wavelength, it can be effectively used in various fields such as land cover classification, target detection, and environment monitoring. Change detection techniques using remote sensing data are generally performed through differences of data with same dimensions. Therefore, it has a disadvantage that it is difficult to apply to heterogeneous sensors having different dimensions. In this study, we have developed a change detection method applicable to hyperspectral image and high spat ial resolution satellite image with different dimensions, and confirmed the applicability of the change detection method between heterogeneous images. For the application of the change detection method, the dimension of hyperspectral image was reduced by using correlation analysis and principal component analysis, and the change detection algorithm used CVA. The ROC curve and the AUC were calculated using the reference data for the evaluation of change detection performance. Experimental results show that the change detection performance is higher when using the image generated by adequate dimensionality reduction than the case using the original hyperspectral image.