• Tunnel and Underground Space
• /
• v.29 no.1
• /
• pp.64-74
• /
• 2019

Behavior of a rock block consisting of rock joints during excavation of an underground opening is an important factor for the mechanical stability of the opening. In this study, the behavior of a rock block under different geostatic stress and joint property conditions was analyzed quantitatively. The behavior of the rock block analyzed by 3DEC numerical analysis was compared with that of the theoretical calculation, and the error between the theoretical value and the numerical analysis result was analyzed under various geostatic stress and joint property conditions. The result of the stability analysis of a rock block showed less than 5% of error with numerical simulation result, which verified the applicability of the purposed analytic solution.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.153-163
• /
• 2012

The Earth's surface deforms vertically in response to a variety of sources relating to lithospheric and sub-lithospheric processes, and distinguishing the continental mechanisms for vertical motions of the lithosphere remains a fundamental challenge in geosciences. A key prerequisite to the challenge is documentation of the temporal and spatial pattern of vertical motions in different tectonic settings. This study is aimed at elucidating the geodynamic factors that can contribute to vertical motions of the Earth's surface in intraplate continental settings including the Neogene uplift in the Korean peninsula based on numerous recent achievements in relevant fields. Ultimately, deciphering the interplay between the Earth's surface and the Earth's interior processes leads us to the notion of "the importance of geomorphic landscape" as a prism to view the dynamics of the Earth's inside.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.397-410
• /
• 2022

The safety of the disposal repository for high level radioactive waste should be guaranteed for a quite long period so that the precise evaluations are required. The site characteristics of the discontinuities are essential part of the safe repository design including engineered barrier and natural barrier systems. The discontinuities act like weak planes and at the same time, they act as flow paths so that their features should be investigated thoroughly. RQD (Rock Quality Designation) is one of the most widely applied characterizing methods due to its simplicity, however, modified designations have been proposed because RQD has some drawbacks, such as its directivity and dependence on the threshold length. This study aims to evaluate the applicability of the modified designations by applying them to the rock mass around KURT and to produce fundamental database that will be utilized in future studies.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2022

As industry and technology go through advancement, it is hard to search new materials which satisfy various standards through conventional trial-and-error based research methods. Crystal Graph Convolutional Neural Network(CGCNN) is a neural network which uses material's features as train data, and predicts the material properties(formation energy, bandgap, etc.) much faster than first-principles calculation. This report introduces how to train the CGCNN model which predicts the formation energy using open database. It is anticipated that with a simple programming skill, readers could construct a model using their data and purpose. Developing machine learning model for materials science is going to help researchers who should explore large chemical and structural space to discover materials efficiently.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.92-92
• /
• 2021

체외수정을 기반으로 이루어지는 성게의 수정 과정은 성게 주변에서 형성되는 복잡한 난류 흐름의 영향을 받게 된다. 성게 몸체의 하류부에 형성되는 재순환 영역 (recirculation zone) 내에는 다양한 난류 와류 흐름이 존재하며, 이들은 성게 몸체에서 방출된 정자와 난자의 충돌을 일으키고 수정 과정에 지대한 영향을 미친다. 즉, 성게의 수정 과정을 이해하기 위해서는 성게 주변의 흐름에 대한 유체역학적 관점에서의 분석이 수행되어야 한다. 본 연구의 목적은 성게 몸체에 의해 발생한 난류 흐름이 성게의 체외 수정에 미치는 영향에 대해 조사하는 것이다. 이를 위해 본 연구에서는 상용 프로그램인 오픈폼 (OpenFaom)을 활용하여 수치 모의를 수행하였다. 성게 주변의 유동장은 LES (Large Eddy Simulation)을 기반으로 모의하였고, 정자와 난자의 확산 궤적은 라그랑지안 입자 추적 (Lagrangian Particle Tracking) 알고리즘을 통해 구현하였다. 총 5개의 유속 조건 (0.025 - 0.20 m/s) 에 대해 모의를 수행하였으며 정자와 난자 사이의 거리를 바탕으로 수정률을 산정하였다. 정자와 난자의 뭉쳐있거나 퍼져있는 공간적인 분포 형태는 Standardized Morisita 지수를 통해 수치적으로 표현하였으며 이들과 수정률과의 관계를 규명하였다. 연구 결과에 따르면 성게 수정은 유속 조건이 0.1 m/s일 때 가장 빈번하게 발생하였으며, 성게 수정의 성공 여부는 크게 2가지 조건에 의해 결정되었다. 첫 번째로, Standardized Morisita 지수가 높을수록 다시 말해 생식세포들이 공간적으로 뭉쳐있어야 하며 두 번째는, 생식세포들을 충돌시킬 수 있는 원동력인 작은 와류가 존재해야 한다. 와류의 크기가 너무 크게 되면 생식세포들은 충돌하지 않고 확산만 되기 때문에 오히려 수정률이 감소하였다. 영역별로 분석한 결과에 따르면, 성게 몸체에 의해 형성된 재순환 영역이 수정과정에 있어 가장 지배적인 영역임을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.371-382
• /
• 2006

A buffeting analysis is utilized for the estimation of aerodynamic vulnerability of a cable-stayed bridge due to upcoming wind turbulences. The buffeting analysis requires several input parameters such as structural parameters, aerodynamic parameters, and aero-elastic parameters. This study is motivated to estimate the sensitivity of these parameters on buffeting responses. The Seohae bridge is selected as an example bridge. The investigated parameters consist of the inclination of lift and drag coefficient of stiffening girder section, exponential decay factors of span-wise distributed wind turbulences, roughness length, spectra of wind velocity fluctuation, and structural damping. The buffeting response showed high dependency on the input parameters. As conclusions, the importance of parameter selection is emphasized. A further study is also proposed for more general conclusions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.96-96
• /
• 2022

가상현실 (Virtual Reality, VR) 기술은 3차원 가상공간 내에서의 높은 몰입감에 기반한 체험을 바탕으로 다양한 분야에서 활용되고 있다. 소방훈련이나 태풍, 지진 등 재해 대응훈련과 같이 인명피해의 위험이 있는 재해에 대한 VR 기술을 활용한 방재교육은 위험성을 동반하지 않으면서도 현장감에 기반한 높은 교육적 효과를 창출할 수 있다. 한국전자통신연구원에서는 VR 기술을 이용하여 소방훈련을 위한 실감 소방훈련 시뮬레이터를 개발한 바 있으며 목동재난체험관에서는 홍수, 태풍, 지진 등 다양한 재해에 대한 안전교육을 위한 자연재해 가상현실체험을 운영하고 있다. 이외에도 전국 지자체 및 교육청에서는 방재교육을 목적으로 VR 기술을 활용하고 있다. 그러나 기존의 VR을 활용한 수재해 방재교육은 범람의 수리학적 특성과 함께 수해지의 지형적 특성을 적절히 반영하지 못하는 단점을 가지고 있다. 이는 방재교육이나 경각심을 부각하는 데엔 효과적이나 실질적인 방재 가이드라인을 제시하는 데엔 한계가 있다. 본 연구는 몰입형 파랑해석모형인 Celeris Base를 기반으로 3차원 가상현실 시각화를 활용한 수리학적 홍수추적 모형을 개발하였다. 3차원 가상현실 시각화는 Unity3D를 이용하여 모의환경 내에 구현되었다. 강우-유출 과정의 수리학적 해석을 위해 동수역학 수치모형의 연속방정식 내에 강우와 침투에 대한 항을 추가하였다. 침투모형으로는 Horton 모형, Green-Ampt 모형과 함께 사면의 기울기를 고려한 Green-Ampt 모형을 적용하였다. 실제 유역에서의 홍수추적 모의결과는 관측값과 비교적 잘 일치함을 확인하였다. 개발된 모형은 VR 방재교육을 통해 일반인의 수재해 대응능력 향상에 기여함과 동시에 정확성 높은 홍수추적 모의결과에 기반한 홍수대책 마련에도 활용 가능할 것으로 기대된다.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.495-507
• /
• 2023

The roughness of discontinuity significantly influences the mechanical characteristics of rock masses and extensively affects thermal and hydraulic behaviors. In this study, we utilized photogrammetry to generate 3D point cloud data for discontinuity and applied this data to characterize the roughness of discontinuity. The discontinuity profiles, reconstructed from the 3D point cloud data, were compared with those manually measured using a profile gauge. This comparison served to validate the accuracy and reliability of the acquired point cloud data in replicating the actual configurations of rock surfaces. Subsequent to this validation, influence of the number of profiles for representative JRC assessment was further investigated followed by suggestion of roughness anisotropy evaluation method with application of it to actual rock discontinuity surfaces.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.1
• /
• pp.24-30
• /
• 2024

Complicated crown fractures of maxillary anterior teeth caused by trauma in adolescence can cause functional and aesthetic problems. For crown fractures with pulp exposure, various restorative methods can be considered depending on the amount of remaining tooth structure. Direct resin restorations are the most traditional and effective method, but they are likely to discolor and break over time. Fixed prosthesis have a high possibility of re-restoration due to marginal disharmony due to tooth movement during the growth period, and restorations using post which are mainly performed for extensive crown fractures increase the risk of root perforation and root fracture. However, endocrown is an integrated structure that gains retention force from the pulp space, enabling effective reconstruction from a biomechanical perspective and providing advantages in restoring function and aesthetics. Therefore, endocrown can be considered as a restoration method for complicated crown fractures caused by trauma in adolescence.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.317-323
• /
• 2024

According to the section A-VI/3 of the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW), Water-based firefighting training center is mandatory to obtain onboard certificates. This space, being similar to fire situations on ships requires that safety measures be quantified to ensure occupant safety and establish operational standards. For fire safety evaluation, cases were designed based on the presence or absence of smoke control equipment using Pyrosim based on Fire Dynamics Simulation (FDS). Vector analysis was performed to evaluate flow of smoke and heat. Available safe escape time / required safe escpae time (ASET/RSET) analysis was conducted to evaluate safety by comparing the interpreted numerical results through Pathfinder. During safety evaluation of the current operational condition, the appropriateness of the function of each smoke control equipment was numerically and visually indicated. The emergency situation with dust collector stopped was expressed by each evacuation time and safety margin of 111.2 seconds, suggesting that be used as a standard of evacuation time.