• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.3-10
• /
• 2016

To establish a network environment where multiple wireless personal area networks(WPAN) are simultaneously operating in the same area, we need to consider the effects of inter-device interference. The extent of interference effect from neighboring frequency channel interferer may be different depending on the modulation types that are used for constructing the wireless network. If a modulation scheme with high spectral side lobes is used, the spatial separation between devices plays a major role in determining the amount of interference from neighboring frequency channel interferer. In this paper, we investigate the effect of inter-device interference in the overlapped raised cosine offset quadrature-quadrature phase shift keying (ORC-$OQ^2PSK$) modulation based WPAN. By comparing the results with those of GFSK modulation based WPAN, we verify the feasibility of ORC-$OQ^2PSK$ based WPAN.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.705-713
• /
• 2021

The modulation transfer function (MTF) is calculated to analyze the resolution of the spatial frequency of the image acquired from the x-ray imaging system. In general, the response function of the detector acquires a line spread function (LSF) using a slit-camera, and derives a modulation transfer function through a Fourier transform. Because of the fact that the x-ray must always be incident on the center of the slit-camera, the tilt of the detector and slit-camera caused by the experimenter will affect the detector performance. In addition, if the tilt increases, the performance evaluation of the x-ray image system will be problematic. In this study, we analyzed the experimental and analytical models in the modulation transfer function, ie, the Fourier domain, based on the experimental error and analyzed the effect on the spatial frequency. Furthermore, performance evaluation is being carried out for various x-ray imaging systems, and experimental errors are indispensable, and the extent to which they can be tolerated should be reviewed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.20-25
• /
• 2008

Acoustic holography exhibits the spatial distribution of sound pressure in time or frequency domain. The obtained picture often contains far more than what we need in practice. For example. when we need to know only the locations and overall propagation pattern of sound sources. a method to show only what we need has to be introduced. One way of obtaining the necessary information is to use envelope in space. The spatial envelope is a spatially slowly-varying amplitude of acoustic waves which contains the information of sources' location. A spatial modulation method has been theoretically developed to get a spatial envelope. By applying the spatial envelope. not only the necessary information is obtained but also computation time is reduced during the process of holography. The spatial envelope is verified as an effective visualization scheme in time domain by being applied to complicated sound fields.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.128-139
• /
• 1999

This paper proposes a linearization technique for the space vector modulation method, which increases the linear control range of inverter up to the 6-step inverter. This method is based on fourier series expansion of the desired output voltage of the inverter to calculate the compensation angle in continuous switching mode and holding angle in discontinuous switching including the 6-step mode respectively. The approximation equation of these angles are used for compensation of fundamental voltage in overmodulation range. Therefore, it is possible to obtain the linear control and the maximized utilization of PWM inverter output voltage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.1029-1039
• /
• 1992

This paper presents the filtering method which is processed on the frequency domain among Hangul character recognition methods. It is processed the Hangul character parrern with spatial positioning modulation and mapped the Hangul character element which have spatial position variant feature onto frequency domain, at this time, normalized spatial position and so normalized the character size in frequency domain. And it is grouped the Hangul character element according to the generating position and set the standard pattern, and used each standard character element pattern with character element filter and filtering the character pattern of Hangul character, it is derived the normalized cross correlation function and the coherence function led to the filtering results, and calculated classification threshold.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.519-527
• /
• 2000

This paper suggests and analyzes the Serially Concatenated Space-Time Code(SCSTC) with the possibility of a efficient high-speed transmission in a band limited channel. The suggested code has a structure that uses the interleaver to connect the space-time code as an inner code and the convolutional code as a outer code serially. This code keeps the advantage of high-speed transmission and also has the high BER performance. The performance of the suggested system is compared with the conventional bandwidth efficient trellis coded modulation, such as a Serially Concatenated Trellis Coded Modulation (SCTCM) and a Turbo-Trellis Coded Modulation(Turbo-TCM). The results show that the suggested system has a 2.8dB and 3dB better BER performance than SCTCM and Turbo-TCM respectively in case of the transmission rate 2b/s/Hz in fading channel.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.89-91
• /
• 2017

We proposed a spatial modulation (SM) scheme to improve spectral efficiency of multi-input multi output (MIMO) systems by using double multi-strata space-time codes (D-MSSTC). For improving the performance of proposed scheme, we allocate transmit power and phase to layers in each MSSTC, and assign rotation angle to SM codebooks. Additionally, we jointly optimize power, phase and rotation angle to maximize the minimum coding gain distance of D-MSSTC-SM. It is observed that the proposed scheme shows better error performance with high spectral efficiency than conventional schemes in simulation results.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.127-135
• /
• 2006

We implement numerical simulations for the distributed optical fiber sensor system that uses the spatially-selective Brillouin scattering, by treating the superposition of the optical-frequency-modulated pump/probe waves in the time domain. We obtain temporal and spatial distributions of Brillouin gain for various cases. Simulations are applied to the case of concatenated optical fibers of different kinds and the case of distributed temperature along the fiber, which give reasonable results for the distributed sensor. The result of using a triangular wave instead of a sinusoidal one as a modulation waveform shows that the triangular wave modulation has an advantage in spatial resolution.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.9
• /
• pp.1667-1671
• /
• 2015

Multi-level holographic data storage is a candidate for the next generation data storage system, since it can store more than one bit per pixel. It is possible to increase the number of codewords if the number of levels is increased, and the code with an appropriate selection of codewords can also increase the minimum distance. In this paper, we propose three multi-level modulation codes of the code rate 1 bit/pixel and compare the performance according to the minimum distance. The result shows that the code with small number of levels is better than that of large number of levels because it is hard to detect threshold value.