• Economic and Environmental Geology
• /
• v.38 no.1
• /
• pp.33-43
• /
• 2005

The purpose of this study is to make and validate landslide susceptibility map using artificial neural network and GIS in Kangneung area. For this, topography, soil, forest, geology and land cover data sets were constructed as a spatial database in GIS. From the database, slope, aspect, curvature, water system, topographic type, soil texture, soil material, soil drainage, soil effective thickness, wood type, wood age, wood diameter, forest density, lithology, land cover, and lineament were used as the landslide occurrence factors. The weight of the each factor was calculated, and applied to make landslide susceptibility maps using artificial neural network. Then the maps were validated using rate curve method which can predict qualitatively the landslide occurrence. The landslide susceptibility map can be used to reduce associated hazards, and to plan land use and construction as basic data.

• Journal of Advanced Navigation Technology
• /
• v.17 no.3
• /
• pp.332-345
• /
• 2013

In this paper, recently, it is described to the piezoelectric transformer technology develops, because it was have to favorable characteristics such as electromagnetic-noise free, compact size, higher efficiency, and superior power density, flux linkage, noiseless, etc. its resonance frequency was used to output waveform of a sine wave. A rotor speed identification method of induction motor based on the theory of flux model reference adaptive system(FMRAS). The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the model are introduced to perform accurate rotor speed estimation. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM techniuqe and DC-DC converter. High speed calculation and processing for vector control is carried out by digital signal one chip microprocessor. Validity of the proposed control method is verified through simulation and experimental results.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2016

Spray dried $Cr_2O_3$ powder having an agglomerated structure of particles was twice treated into a plasma flame to increase its apparent density. The powder subjected to the first densification treatment did not show the entirely melted state keeping inner particle hollows, and it was fully melted after the second processing only. The powder size as a result of the second treatment decreased, and the apparent density as well as flowability were increased due to melting and surface smoothing effects. But a part of particles after the second densified treatment showed the hollow structure, especially those which were above $30{\mu}m$ in size. This densification behavior of the powder has been qualitatively discussed in terms of the thermal conductivity and inner gas pressure within aggregates exposed to the plasma flame.

• Tunnel and Underground Space
• /
• v.29 no.5
• /
• pp.318-331
• /
• 2019

A three-dimensional(3D) equivalent continuum modeling was performed to analyze hydraulic behavior of rock mass considering discontinuities by using DFN model and smeared fracture model. DFN model was generated by FLAC3D and smeared fracture model was applied by using FISH functions, which is built-in functions in FLAC3D, for equivalent continuum model of fractured rock mass. Comparative analysis with 3DEC, which is for discontinuum analysis, was conducted to verify reliability of equivalent continuum analysis by using FLAC3D. Similar results of hydraulic analysis under the same conditions could be achieved. Equivalent continuum analysis of fractured rock mass by using DFN model was implemented to compare with existing analytical methods for inflow into the tunnel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.370-370
• /
• 2017

최근 기후변화와 이상기후의 영향으로 인하여 홍수재해의 시 공간적 패턴은 보다 복잡해지고, 예측이 어려워지고 있다. 이러한 기상이변에 따른 홍수피해를 예방하기 위한 비구조적 대책으로 홍수위험등급 및 범람범위 등의 정보를 포함하고 있는 홍수위험지도의 작성이 필요하다. 실제로 고정밀도 홍수위험지도를 작성하기 위해서는 지형, 지질, 기상 등의 디지털 정보 및 사회 경제와 관련된 다양한 DB를 필요로 하며, 강우-유출-범람해석 모델링을 통해 범람면적 및 침수깊이 등의 정보를 획득하게 된다. 하지만 일부지역, 특히 개발도상국에서는 이러한 계측 홍수 데이터가 부족하거나 획득할 수가 없어 홍수위험지도 제작이 불가능하거나 그 정확도가 매우 낮은 실정이다. 따라서 본 연구에서는 ASTER 또는 SRTM과 같은 범용 DEM 등 지형자료만을 기반으로 한 선형이진분류법(Liner binary classifiers)과 ROC분석(Receiver Operation Characteristics)을 이용하여 미계측 유역 (DB부재 또는 부족으로 강우-유출-범람해석 모델링이 불가능한 북한지역)의 홍수위험지역을 탐지하고, 적용성을 평가하고자 한다. 5개의 단일 지형학적 지수와 6개의 복합 지형학적 지수를 이용하여 Area Under the Curve (AUC)를 계산하고, Sensitivity (민감도)와 Specificity (특이도)가 가장 높은 지수를 선별하여 홍수위험지도를 작성하고, 실제 홍수범람 영상(2007년 북한 함경남도지역 용흥강 홍수)과 비교 분석하였다. 본 연구에서 제시하는 선형이진분류법과 ROC분석 방법은 홍수범람해석을 위한 다양한 기초정보를 필요로 하지 않고, 지형정보만을 사용하기 때문에 관측 데이터가 없거나 부족한 지역에 대해서 우선적으로 홍수위험지역을 탐지하고, 선별하는데 유용할 것으로 판단된다.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.23-29
• /
• 2021

Recently, ground subsidence has been steadily occurring mainly in downtown areas, threatening the safety of citizens. Under the road, various underground facilities such as water supply pipe, sewage pipe, and communication pipe are buried. Due to the aging of these underground facilities and the reckless development of the underground, it is acting as a cause of ground subsidence. Although there is a result of analyzing the risk of ground subsidence according to the deterioration of the existing pipeline, there is no result of analyzing the risk of ground subsidence using the density of pipelines indicating ground disturbance. Therefore, in this study, the density of the underground space was analyzed using the data of six types of representative underground pipelines in Seoul, and a study was conducted on whether there is a correlation with the ground subsidence. As a result, it was found that the density of underground facilities is high in the area where the ground subsidence occurred, indicating that the density of pipelines have an effect on the ground subsidence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1474-1480
• /
• 2018

When fires occur in high-rise buildings, it is difficult to determine whether each escape route is safe because of complex structure. Therefore, it is necessary to provide residents with escape routes quickly after determining their safety. We propose a method to measure the visibility of the escape route due to the smoke generated in the fire by analyzing the images. The visibility can be easily measured if the density of smoke detected in the input image is known. However, this approach is difficult to use because there are no suitable methods for measuring smoke density. In this paper, we use principal component analysis by extracting a background image from input images and making it training data. Background images and smoke images are extracted from images given as inputs, and then the learned principal component analysis is applied to map of as a new feature space, and the change is calculated and the visibility due to the smoke is measured.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.26-36
• /
• 2020

The use of existing macroscopic research of pedestrian behavior on the walking link as data is limited in determining an individual pedestrian's moving route and the level of service. In macroscopic studies, it is difficult to make quantitative indices, such as pedestrian flow rate, occupied space, density, and speed for determining the level of service on pedestrian roads. Therefore, the microscopic pedestrian route is required to establish appropriate pedestrian policies. In this study, the Yeok-Sam subway station network was examined using a micro-simulation VISSIM, which was then calibrated and validated statistically. The Pedestrian Road's Level of Service of Yeok-Sam subway station area was evaluated using the pedestrian speed as the evaluating index on the Korean highway capacity handbook.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.133-146
• /
• 2023

Traffic states in urban areas are essential to implement effective traffic operation and traffic control. However, installing traffic sensors on numerous road sections is extremely expensive. Accordingly, estimating the traffic state using a vehicle-mounted camera, which shows a high penetration rate, is a more effective solution. However, the previously proposed methodology using object tracking or optical flow has a high computational cost and requires consecutive frames to obtain traffic states. Accordingly, we propose a method to detect vehicles and lanes by object detection networks and set the region between lanes as a region of interest to estimate the traffic density of the corresponding area. The proposed method only uses less computationally expensive object detection models and can estimate traffic states from sampled frames rather than consecutive frames. In addition, the traffic density estimation accuracy was over 90% on the black box videos collected from two buses having different characteristics.