• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.101-109
• /
• 2019

The bucket platform is a new structure suitable for construction of offshore bridge foundations and providing the temporary support for equipments and labour. The platform can be subjected to moment loading due to the eccentric loading or the horizontal load by wave and wind. Therefore, a three dimensional finite element analysis was performed to evaluate the moment bearing capacity of the bucket platform, varying soil density, the diameter and embedment depth of the bucket. The numerical modeling was verified and compared with the moment-rotation curve from a field loading test. The uniform sandy ground was assumed and the moment load was applied at the top plate of the platform, increasing bucket rotation. The moment-rotation relations were analyzed to determine the moment capacity, which was influenced by the embedment depth and diameter of the bucket. Finally, a preliminary design equation was suggested to estimate the moment bearing capacity.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1315-1324
• /
• 2016

Recently, the increasing interest in drones has resulted in development of new related technologies. Attention has been focused toward research on swarm flight which controls drones simultaneously without collision. Thus, complicated missions can be completed rapidly through collaboration between drones. Due to low position accuracy, GPS is not appropriate for the outdoor mission involving accurate flight. In addition, the inaccurate position estimation of GPS gives rise to the serious problem of collision, since many drones are controlled in a narrow space. In this study, we increased the accuracy of position estimation through various sensors with Real-Time Kinematic-GPS (RTK-GPS). The mode switching algorithm was proposed to minimize the problem of sensor error. In addition, we introduced the outdoor swarm flight system based on the proposed position estimation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.91-91
• /
• 2015

반도체 공정의 발전에 의해 최근 생산되는 메모리 등은 십 수 나노미터까지 좁아진 선 폭을 갖게 되었다. 이러한 이유로, 기존에는 큰 문제를 발생시키지 않던 나노미터 영역의 입자들이 박막 증착 공정과 같은 반도체 제조공정 수율을 저감시키게 되었다. 따라서 오염입자의 유입을 막거나 제어하기 위해 transmission electron microscopy (TEM)나 scanning electron microscopy (SEM)과 같은 전자현미경을 활용한 비 실시간 입자 측정 방법 및 광원을 이용하는 in-situ particle monitor (ISPM) 및 전기적 이동도를 이용한 scanning mobility particle sizer (SMPS) 등 다양한 원리를 이용한 실시간 입자 측정방법이 현재 사용중에 있다. 이 중 진공 내 입자의 수농도를 측정하기 위해 개발된 particle beam mass spectrometer (PBMS) 기술은 박막 증착 공정 등 chemical vapor deposition (CVD) 방법을 이용하는 진공공정에서 활용 가능하여 개발이 진행되어 왔다. 본 연구에서는 PBMS의 한계점인 입자 밀도, 형상 등의 특성분석이 용이하도록 PBMS와 scanning electron microscopy (SEM), 그리고 energy dispersive spectroscopy (EDS) 기술을 결합하여 입자의 직경별 개수농도, 각 입자의 형상 및 성분을 함께 측정 가능하도록 하였다. 협소한 반도체 제조공정 내부 공간에 적용 가능하도록 기존 PBMS 대비 크기 또한 소형화 하였다. 각 구성요소인 공기역학 집속렌즈, electron gun, 편향판, 그리고 패러데이 컵의 설치 및 물리적인 교정을 진행한 후 입자발생장치를 통해 발생시킨 sodium chloride 입자를 상압 입자 측정 및 분류장치인 SMPS 장치를 이용하여 크기별로 분류시켜 압력차를 통해 PBMS로 유입시켜 측정을 진행하였다. 나노입자의 입경분포, 형상 및 성분을 측정결과를 토대로 장치의 측정정확도를 교정하였다. 교정된 장치를 이용하여 실제 박막 증착공정 챔버의 배기라인에서 발생하는 입자의 수농도, 형상 및 성분의 복합특성 측정이 가능하였으며, 최종적으로 실제 공정에 적용가능하도록 장치 교정을 완료하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.4
• /
• pp.339-344
• /
• 2009

The joint cruises of six times between Korea and China were carried out for a better understanding of the environmental and oceanographical characteristics of the Yellow Sea for 6 years from 1998 to 2003. Zooplankton samples were collected one time per year at 24 stations on 3 lines of the Yellow Sea. The aim of this study is to understand the seasonal fluctuation of zooplankton community in the Yellow Sea. There is no trend on the spatio-temporal distribution of zooplankton. Copepoda, the major taxon of the Yellow Sea, was high in distribution in the eastern part and Chaetognatha in the western part of the Yellow Sea. In this results, the dominant copepods were Calanus sinicus, Paracalanus parvus s.l., Oithona atlantica, and Corycaeus affinis during the study periods. The density fluctuation of these dominant species may be an important factor in determining the fisheries resource of the Yellow Sea.

• Journal of Korea Water Resources Association
• /
• v.41 no.7
• /
• pp.681-692
• /
• 2008

This study investigated the application of the successive correction method(SCM), a simple data assimilation method, for synthesizing the radar and rain gauge data. First, the number of iteration and influence radius for the SCM application were decided based on their sensitivity analysis. Also, for the evaluation of synthetic rainfall, the distributed rainfall field using the dense rainfall gauge network was assumed to be the true one. The synthetic rainfall field based on the SCM was also compared quantitatively with the one based on the co-Kriging frequently used nowadays. As the results, the SCM, a simple and economical data assimilation method, was found to secure the accuracy and statistical characteristics of the co-Kriging application.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.391-396
• /
• 2003

This paper proposes a new approach that converts continuous-valued attributes to categorical-valued ones considering the distribution of target attributes(classes). In this approach, It can be possible to get optimal interval boundaries by considering the distribution of data itself without any requirements of parameters. For each attributes, the distribution of target attributes is projected to one-dimensional space. And this space is clustered according to the criteria like as the density value of each target attributes and the amount of overlapped areas among each density values of target attributes. Clusters which are made in this ways are based on the probabilities that can predict a target attribute of instances. Therefore it has an interval boundaries that minimize a loss of information of original data. An improved performance of proposed discretization method can be validated using C4.5 algorithm and UCI Machine Learning Data Repository data sets.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.112-118
• /
• 2001

Magnetic field is commonly used in low temperature processing plasmas to enhance the performance of the plasma reactors. E$\times$B magnetron or surface multipole configuration is the most popular. However, the properties of capacitively coupled rf plasma confined by axial static magnetic field have rarely been studied. With these background, the effect of magnetic field on the characteristics of capacitively coupled 13.56 MHz/40 KHz argon plasma was studied, Ion saturation current, electron temperature and plasma potential were measured by Langmuir probe and emissive probe. At low pressure region (~10 mTorr), ion current increases by a factor of 3-4 due to reduction of diffusion loss of charged particles to the wall. Electron temperature slightly increases with magnetic field for 13.56 MHz discharge. However, for 40 KHz discharge, electron temperature decreased from 1.8 eV to 0.8 eV with magnetic field. It was observed that the magnetic field induces large temporal variation of the plasma potential. Particle in cell simulation was performed to examine the behaviors of the space potential. Experimental and simulation results agreed qualitatively.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.949-960
• /
• 2003

The resolution issue of wetness index with relaxation of the steady state assumption is explored on the platform of Digital Elevation Model (DEM). The variabilities of the quasi-dynamic wetness index and the dynamic wetness index are discussed on the base of the spatial and statistical aspects depending upon resolutions of DEM and the drainage time. The organization patterns of the wetness index can be observed upon various drainage times and pixel size. The transient behaviour of wetness patterns of the Sulmachun watershed are shown in the relatively short drainage time. The statistical analysis of the quasi-dynamic and dynamic wetness analysis provide the convergence of analysis results to the steady state characteristics later than 10,000 hours drainage time. The probability density functions of the quasi-dynamic and the dynamic wetness index shows the existence of the threshold pixel size of DEM which provide stability and consistency in the computation result of these two wetness index.

• Journal of Korea Water Resources Association
• /
• v.40 no.5
• /
• pp.373-382
• /
• 2007

The exact resolution of channel initiation points is not so easy because of the dynamic behaviors of water movement on the hillslope. To this end, Kim, Joocheol and Kim, Jaehan(2007) have represented the channel network in real world basins for slope-area regimes using DEM. This study is its sequential content and then proposes the reliabilities of the hypothetical channel networks identified from DEM, which are assessed based on the geometric characteristics of drainage density and source-basin. The resulting drainage structures on the natural basin can be found to be depicted remarkably depending on the hypothetical channel network applied by slop-area threshold criterion. In addition, it is shown that there is a wonderful geometric similarity between the shapes of source- basin in a geomorphologically homogeneous region. Area threshold criterion could have restricted the shape of source-basin, so that it might bring about the incorrect drainage structures. But the hypothetical channel networks identified from DEM deserves special emphasis on expressing the space-filling structures nonetheless.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.24-31
• /
• 2005

A plused laser ablation deposition(PLAD) technique has been used for producing fine particle as well as thin film at relatively low substrate temperatures. However, in order to manufacture and evaluate such materials in detail, motions of plume particles generated by laser ablation have to be understood and interactions between the particles by ablation and gas plasma have to be clarified. Therefore this paper was focused on the understanding of plume motion in laser ablation assisted by hi plasmas at 100[mTorr]. One-dimensional hybrid model consisting of fluid and particle models was developed and three kinds of plume particles which are carbon atom(C), $ion(C^+)$ and electron were considered in the calculation of particle method. It was obtained that ablated $C^+$ was electrically captured in Ar plasmas by strong electric field(E). The difference between motions of the ablated electrons and $C^+$ made E strong and the collisional processes active. The energies of plume particles were investigated on a substrate surface. In addition the plume motion in Ar gas was also calculated and discussed.