• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.65-73
• /
• 2008

The present work deals with subjective assessments to propose the objective parameter related to the subjective attribute of reverberation in the coupled room varied the aperture opening size. A 1/10 scale model was built and used for the measurements and subjective assessments. For the subjective tests, binaural impulse responses(BIRs) were measured using a dummy head and the measured BIRs were convolved with anechoic recorded music for the presentation over the headphones. The results showed that the perceived reverberation was the largest in the aperture opening size 12.5%(1.97% of mail) room surface area)and decreased with increasing the aperture opening size over 25% (3.94% of main room surface area) in the main room coupled with the secondary reverberant room. In the main room coupled with the secondary absorptive room, there was no changes in the perceived reverberation up to the aperture opening size 6.25%(0.99% of main room surface area) and it gradually decreased with increasing the aperture opening site over 12.5%. The objective parameter, T30/T15, showed a very low correlation with the perceived reverberation in the coupled room varied the aperture opening size but showed a high correlation with a new objective parameter, T30/Tbp, proposed by the authors. Because the late part decay energy more rapidly increases with increasing the aperture opening site than the early and middle part decay energy, the LDT/EDT or T3/T1 is a better quantifier to measure double slopes in the coupled room than the T30/T15.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.231-239
• /
• 2007

This paper presents the trade-off relationship between area and performance in the hardware design space exploration for the Korean national standard 128-bit block cipher algorithm SEED. In this paper, we compare the following four hardware design types of SEED algorithm : (1) Design 1 that is 16 round fully pipelining approach, (2) Design 2 that is a one round looping approach, (3) Design 3 that is a G function sharing and looping approach, and (4) Design 4 that is one round with internal 3 stage pipelining approach. The Design 1, Design 2, and Design 3 are the existing design approaches while the Design 4 is the newly proposed design in this paper. Our new design employs the pipeline between three G-functions and adders consisting of a F function, which results in the less area requirement than Design 2 and achieves the higher performance than Design 2 and Design 3 due to pipelining and module sharing techniques. We design and implement all the comparing four approaches with real hardware targeting FPGA for the purpose of exact performance and area analysis. The experimental results show that Design 4 has the highest performance except Design 1 which pursues very aggressive parallelism at the expanse of area. Our proposed design (Design 4) shows the best throughput/area ratio among all the alternatives by 2.8 times. Therefore, our new design for SEED is the most efficient design comparing with the existing designs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.26 no.1
• /
• pp.75-88
• /
• 2024

It would be advantageous to predict acreage and yield of crops in major grain-exporting countries, which would improve decisions on policy making and grain trade in Korea. A climate suitability model can be used to assess crop acreage and yield in a region where the availability of observation data is limited for the use of process-based crop models. The objective of this study was to determine the climate suitability index of wheat by province in Ukraine, which would allow for the spatial assessment of acreage and yield for the given crop. In the present study, the official data of wheat acreage and yield were collected from the State Statistics Service of Ukraine. The EarthStat data, which is a data product derived from satellite data and official crop reports, were also gathered for the comparison with the map of climate suitability index. The Fuzzy Union model was used to create the climate suitability maps under the historical climate conditions for the period from 1970 to 2000. These maps were compared against actual acreage and yield by province. It was found that the EarthStat data for acreage and yield of wheat differed from the corresponding official data in several provinces. On the other hand, the climate suitability index obtained using the Fuzzy Union model explained the variation in acreage and yield at a reasonable degree. For example, the correlation coefficient between the climate suitability index and yield was 0.647. Our results suggested that the climate suitability index could be used to indicate the spatial distribution of acreage and yield within a region of interest.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.97-102
• /
• 2007

Recently, coastal damage according to the natural disaster like storm-surge, overflowing of the sea has been massively increased. In case of earth fill at the seaside, there are a lot of weak areas of the natural disaster and it has also high possibility that a large disaster happens. Thus flood expectation map in the reclaimed land using 3D spatial information was produced in this study. The area around Myungji, Kangsugu, Busan which was made with the large scale earth fils at the seaside was designated as a study area. Observation of both costal datum and ground height using the tidal date and field surveying dates was conducted. Terrain model using the GIS program was produced and than 3D building model was produced using 3D MAX. It was shown that there are possibility more than 50% if over 4.5m storm-surge is happening, as a result of calculating the virtual flooded area on the produced cartographic map.

• Journal of the Korean Regional Science Association
• /
• v.34 no.2
• /
• pp.35-47
• /
• 2018

This research aims to examine the spatial patterns of vacant housings and the factors determining housing vacancy in Daegu using individual-level building DB. The results of the spatial pattern analysis showed a donut shaped-spatial concentration of vacant housings in the central areas of the city. The results of logistic regression analysis revealed that not only individual building characteristics, such as building area, number of floors, and building age, but also socio-economic characteristics of community, such as urban redevelopment district, number of adjacent vacancies, recent population change, and ratio of elderly, are important factors affecting housing vacancies.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.191-191
• /
• 2015

무분별한 도시화 및 산업화로 인해 불투수면이 증가하고 있다. 불투수면은 빗물이 투과하지 못하는 지면을 의미한다. 이러한 불투수면은 강우 시 지면에 있는 유해물질이 그대로 인근 수계로 유입되게 함으로써 심각한 수질 오염을 야기한다. 이와 관련하여 환경부에서는 불투수율 관리를 위하여 2013년에 전국토를 대상으로 불투수율을 산정한바 있으나, 소축척 수준의 시 또는 유역 단위 통계만을 산출하였고 대축척 수준의 소규모 개인 필지 내 조경지역 등을 반영한 불투수율 통계는 현재까지 부재하다. 따라서 본 연구에서는 인천시 부평구를 대상으로 소규모 필지까지 적용 가능한 고해상도 투수/불투수도를 제작 및 활용하여 용도지역별 불투수율 현황을 분석하였다. 불투수면의 공간적 분포 확인을 위해 토지피복지도, 수치지형도, 항공사진(25cm급) 등을 활용하여 고해상도 투수/불투수도를 제작하였다. 투수/불투수도는 세분류 토지피복지도 제작 지침인 선형 요소의 경우 폭 3m, 면형 요소의 경우 면적 $10m{\times}10m(100m^2)$를 참조하여 제작되어 개별 필지단위의 불투수면까지 확인 가능하다. 이후 용도지역도를 수집하여 GIS 환경에서 투수/불투수도와 중첩하여 용도지역별 불투수율을 산출하였다. 불투수율을 산정한 결과 부평구 전체 불투수율은 64%로 확인되었다. 또한 용도지역도 중분류상 주거지역의 경우 불투수율이 82.1%, 상업지역의 경우 91.7%, 공업지역의 경우 94.1%, 녹지지역의 경우 30%로 확인되었다. 상업지역 및 공업지역의 경우 불투수율이 90%이상으로 불투수면 관리가 시급하다고 판단되었다. 본 연구 결과는 기존 환경부에서 제작한 투수/불투수도 보다 정확한 불투수면의 공간적 분포 확인 및 불투수 면적 산출이 가능하여 불투수면 우선관리지역 선정을 위한 기초자료로 활용 가능할 것으로 판단된다. 향후 연구에서는 본 연구 결과를 바탕으로 불투수율이 높은 지역을 우선 선별하여 저영향개발(LID, Low Impact Development) 및 그린빗물인프라(GSI, Green Stormwater Infrastructure)의 활용 방안에 관한 연구가 이루어져야한다. 특히, 불투수율이 높은 상업지역 및 공업지역에 대해서는 연구 결과의 적극적인 활용을 통한 개선이 요구된다.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.201-206
• /
• 2019

Korea is constructing geospatial information application system for geospatial information utilization, but it is trying to establish a system for joint use of geospatial information system centering on Ministry of Land Transport and Transport due to the problem of sharing. The purpose of this study is to investigate and analyze the geospatial information application system operated by local governments, and to suggest the application of geospatial information application system using unmanned aerial images. As a result of the research, it was found that the functions of existing spatial information application system are concentrated on the public services and it is difficult to share and utilize data between administrative departments. In addition, the utilization of the system using unmanned aerial image has been suggested, and additional functions such as vector display, area calculation, and report generation have been derived to improve the usability of geospatial information application system. If additional functions of spatial information application system are added through further studies in the future, it will be possible to use it as a basic data of field survey and policy decision in related fields. And non-experts will be able to improve the efficiency of work by utilizing highly accurate geospatial information in various fields.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.1 no.2
• /
• pp.39-51
• /
• 1996

Design scheme drawings of the two major corporate hospitals - Asan Medical Center and Samsung Medical Center - are analysed in the aspect of floor area distributions and their proportions for various users and user-functions. Primary users of hospitals are categorized into three ; patients, employees and others. Then, patient spaces are subdivided into patient private, patient/medical, patient/support staff, patient/nursing, patient/guardian, patient common ; employee spaces into doctors, trainees, doctors common, nurses, support staffs, non-medical staffs, employee common ; others spaces into subcontractors, general publics, non-living, and internal circulation. The purpose of this research is to develop a user-focused insight into hospital spaces and a new method of hospital programming and design.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.29-32
• /
• 2008

지중화 사업을 원활하게 추진하기 위해서는 전력설비의 설치공간 화보, 공간제공의 의무조항 등 이에 합당한 법적, 제도적 대책을 수립할 필요가 있다. 이를 위해선 전력회사의 전기공급설비를 위한 공간제공을 의무화하는 것이 선행되어야 하며 건축법 및 전기사업법의 관련 조항을 규정화할 필요가 있다. 따라서 배전선로 지중화에 많은 경험을 가지고 있는 해외 선진 전력회사의 전기설비를 위한 공간 화보를 위한 사항을 조사하였으며, 이를 바탕으로 국내 실정에 맞는 기기의 설치면적 산출 및 법규내용을 제시하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.119-121
• /
• 2000

문자 정보 및 X-Ray, MRI, CT등과 같은 의료영상 정보를 취급하는 의료정보 시스템에서의 유사객체 검색을 지원하는 협력 의료정보 시스템의 설계에 대하여 논한다. 이를 위해 객체간 의미적 관련성을 기반으로 한 유사도 자동 추출 방식 및 지식베이스 구성 방식을 제안하고 이를 활용한 유사객체 검색에 대하여 논한다. 특히 의료영상을 객체 값으로 갖는 경우 객체간 유사도는 영상처리의 특징추출 방식에 의해 추출된 영상내에 출현하는 공간 객체의 위치, 면적, 둘레, 공간 객체간의 위상 관계 등의 공간 속성을 이용한다. 여기서 공간적 위치에 근거한 유사도는 공간 위치를 대표하는 Hilbert값의 분포와 빈도를 토대로 계산한다.