• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.265-280
• /
• 2023

Water leakage in tunnels is a defect that can affect tunnel stability and the ground movement by changing the stress and pore water pressure of the surrounding ground. Long-term or large-scale water leaks may lead to damage of tunnel structure and the surrounding environment, such as tunnel lining instability and ground surface settlement. The present study numerically investigated the effects of water leakage on the structural stability of a tunnel and the ground behavior. The tunnel was assumed to be under undrained conditions for preventing the inflow of the surrounding water and leaks occurred in the concrete lining after completion of the tunnel construction. A coupled hydro-mechanical analysis using a TOUGH-FLAC simulator developed in Python was conducted for assessing the leakage induced-behavior of the tunnel structure and ground under different conditions of the amount and location of water leak. Additionally, the effect of hydro-mechanical coupling terms on the results of coupled response was investigated and discussed.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.25-29
• /
• 2023

Effect of the processes of polysilazane solid electrolyte layer and silver (Ag) active electrode on the electrical characteristics of memristor was investigated. The memristor with the solid electrolyte annealed at higher temperature exhibited the higher set voltage and better memory retention characteristics than that annealed at lower temperature. The increase in the set voltage and the improvement of the memory retention characteristic at high annealing temperature were attributed to a reduction in the void density and an increase in the void uniformity inside the solid electrolyte, respectively. In the case where the polysilazane solution's concentration is high, the memristor exhibited rapid degradation of low resistive state even annealed at high temperature. Lastly, it was shown that the memristor with the solution-processed Ag active electrode showed WORM property unlike that with the vacuum-processed Ag active electrode. The WORM property was possibly due to morphological defects present in the solution-processed Ag active electrode.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.92-107
• /
• 2023

Recently, along with the continuous increase in the supply of electric vehicles, electric vehicle fire accidents are also showing a rapidly increasing trend. Electric vehicle fires last for a long time compared to fires in internal combustion engine vehicles and have problems with the risk of secondary explosions and the generation of large amounts of smoke. In particular, electric vehicle fires in underground roads, which are semi-enclosed spaces, may amplify the problems of existing electric vehicle fires. On the other hand, there are no domestic response guidelines for electric vehicle fires occurring inside underground roads. Therefore, an awareness of fire accidents was confirmed through a survey of the general public, and electric vehicle fire characteristics and primary considerations were derived from stakeholders related to electric vehicle fires in underpasses. Through this, the guidelines for responding to electric vehicle fires on underground roads were established.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.17-26
• /
• 2024

Aircraft engines are exposed to high temperatures, high pressures, and stress caused by the rotation of the turbine shaft during flight. These loads can result in microcracks both on the inside and outside surfaces of the structure. Consequently, this can lead to structural defects and negatively impact the lifespan of the parts. To proactively prevent these defects, a finite element analysis is carried out to identify cracks. However, this process is time-consuming and requires significant effort due to the repetitive nature of crack modeling. This study aims to develop a crack modeling method based on the finite element model. To achieve this, the Constrained Delaunay Triangulation (CDT) technique is employed to triangulate the space while considering limitations on point connections. The effectiveness of this method is validated by comparing stress intensity factors for semi-elliptical cracks in plates and cylindrical vessels. This approach proves to be a valuable tool for crack analysis studies.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.3-12
• /
• 2006

The purpose of this study is to describe the Non-Destructive Testing(NDT) of the rockbolt and investigate the applicability of the NDT methods to estimate the integrity of the rockbolt. To examine the rockbolt integrity including rockbolt itself and grouting material, two methods are adopted: numerical and experimental methods. In the numerical method, the numerical code DISPERSE is used to analyze the dispersion of the rockbolt. The dispersion curve shows the effects of the thickness and stiffness of grouted materials on the embedded rockbolt. Therefore, the optimal frequency for the integrity test of the rockbolt is obtained: 20~120kHz in L(1,0) mode. In the experimental methods, destructive and non-destructive tests are carried out in a laboratory. In the non-destructive test, the low frequency mode generated by an impact and t he high frequency mode generated by an ultrasonic transducer seem to characterize the rockbolt condition readily. The experimental results show that the guided waves attenuate more significantly when the stiffness of the grouted material increases and/or the zone of the defect increases. Meanwhile, the ultimate capacity of rockbolt was evaluated through the pull-out tests and is compared to the NDT results. This study demonstrates that the NDT is a valuable tool for the rockbolt integrity evaluation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.285-286
• /
• 2012

육각형 구조를 지닌 2차원의 물질인 그래핀은 우수한 전도도와 투과율로 투명전극의 신소재로 각광 받고 있다. 특히, 그래핀은 현재 투명전극으로 가장 많이 사용되고 있는 Indium Tin Oxide(ITO)로는 구현하기 힘든 Flexible display의 어플리케이션으로 사용하기 위한 목적으로 많은 기술 개발이 이루어지고 있다. 이러한 그래핀의 응용은 가장 먼저 그래핀의 생산이 안정적이고 원활히 이루어질 때 실질적으로 가능할 것이다. 하지만, 탄소로 이루어진 그래핀의 성장은 제한된 기판 위에서만 가능하기 때문에 성장이 이루어진 그래핀을 다른 기판에 전사시켜야하는 문제점이 있다. 그래핀 전사방법에는 직접전사, PMMA 전사, TRT 전사, 금속전사, 망전사, PDMS 전사 등 다양한 방법이 있다. 이 중에서 현재 가장 많이 사용되고 있는 전사방법으로는 직접전사, PMMA 전사, TRT 전사 방법이 있다. 직접전사의 경우 니켈위에 성장된 다층의 그래핀을 전사시킬 때 많이 사용되는 방법으로 니켈 에천트에 전사 시킬 그래핀을 띄워 니켈을 녹인 후 원하는 기판을 이용하여 전사하는 간단한 방법이다. 직접전사는 전사가 이루어진 후 그래핀에 남는 결함이 거의 존재 하지 않는 장점이 있지만 문제점은 단일층의 그래핀의 경우 니켈 에천트위에서 잘 보이지 않을 뿐 아니라 에천트에서 기판으로 전사할 때 너무 얇은 막으로 인해 다 찢어져버린다는 것이다. 이를 해결하기 위해 사용되는 전사 방법으로 TRT를 이용하여 구리위에 성장된 그래핀을 상온 시에는 점성을 가진 테이프를 이용해 부치고 구리에 천트에 구리를 녹인 후 원하는 기판위에 놓고 열을 가해 그래핀을 전사하는 방법이 있다. TRT 전사방법은 얇은 막의 그래핀을 찢어지지 않도록 지지해주어 대면적 기판위에도 전사 할 수 있는 장점이 있지만 전사 후 그래핀에 남아 있는 잔여물들이 많고(그림 1. (b)), 테이프를 이용한다는 점에서 그래핀의 얇은 막이 손상될 수 있는 단점이 있다. 그렇기 때문에 본 연구에서는 직접전사와 TRT전사의 문제점들인 전사 후 잔여물와 그래핀 단일층의 손상을 최소화할 수 있는 방법으로 PMMA전사를 가장 적합한 전사방법이라는 것을 라만 분석, 면 저항측정, 그래핀을 이용한 LED제작을 통해서 살펴 보았다. 먼저 라만 분석을 이용해 TRT전사 후 상당히 많은 빈 공간이 생김을 확인할 수 있었으며, 결과적으로 면 저항이 약 $1.5k{\Omega}$~$3M{\Omega}$까지 PMMA의 약 0.9~1.2 $k{\Omega}$와 비교했을 때 큰 차이가 있음을 확인할 수 있었다. 또한, 이후 각각의 전사방법으로 얻은 그래핀을 LED의 스프레딩 층으로 제작한 결과에서도 TRT전사방법보다 PMMA전사방법의 결과가 좋음을 알 수 있었다(그림 2).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.669-678
• /
• 2018

This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.410-418
• /
• 2017

Amelogenesis imperfecta characterized as abnormally formed enamel is caused by a defect of unique group of genes. Patients affected by this disease might have difficulties in social and psychological aspects due to non-esthetic teeth as well as functional problems caused by enamel detachment and tooth wear from their early ages. Adult patients with amelogenesis imperfecta can be treated with full-mouth restorations, which make functional and esthetic rehabilitations of severely worn tooth. However, the anterior open bite and lack of occlusal clearance for posterior teeth restorations due to compensatory extrusion are the intervening factors in the prosthetic treatment. Therefore, the determination of anterior tooth lengths, vertical dimension, and anterior guidance should be set carefully. Recently, computer-aided design and computer-aided manufacturing (CAD/CAM) techniques help systematic approaches and enable dentists to reduce time-consuming procedures in the diagnosis and treatment of full-mouth rehabilitation. This case report demonstrates the successful full mouth rehabilitation using a CAD/CAM system in a young adult patient with amelogenesis imperfecta and anterior open bite.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2012

$Li_3V_2(PO_4)_3$/carbon composite materials are synthesized from a sucrose-containing precursor. Amorphous $Li_3V_2(PO_4)_3/C$ (a-LVP/C) and crystalline $Li_3V_2(PO_4)_3/C$ (c-LVP/C) are obtained by calcining at $600^{\circ}C$ and $800^{\circ}C$, respectrively, and electrochemical performance as the negative electrode for lithium secondary batteries is compared for two samples. The a-LVP electrode shows much larger reversible capacity than c-LVP, which is ascribed to the spatial $Li^+$ channels and flexible structure of amorphous material. In addition, this electrode shows an excellent rate capability, which can be accounted for by the facilitated $Li^+$ diffusion through the defect sites. The sloping voltage profile is another advantageous feature for easy SOC (state of charge) estimation.

• Korean Journal of Biological Psychiatry
• /
• v.8 no.2
• /
• pp.258-265
• /
• 2001

Objectives : Chronic alcohol consumption has been known to result in various neurocognitive deficits. Many neuropsychological studies revealed that the major disturbances occurred in the executive function, learning and short-term memory, visuospatial performance function, perceptuo-motor skills, and abstraction and problem solving abilities. This study was done to identify which cognitive areas might be mainly affected. Methods : The cognitive disturbance was evaluated using the Korean Version of the Mini Mental State Examination(MMSEK) and the 7 Minute Screen(7MS) in male inpatients with alcohol dependence(N=3 : as well as in age and education level matched healthy male controls(N=30). Four individual tests of the 7MS were consisted of the Benton Temporal Orientation Test, the Enhanced Cued Recall, the Clock Drawing and the Category Fluency. Results : 1) The average scores of four individual test of the 7MS for the alcoholics were $2.77{\pm}4.38$ for the Benton Temporal Orientation Test, $13.90{\pm}2.02$ for the Memory Test(the Cued Recall $6.77{\pm}1.94$, the Uncued Recall $7.10{\pm}2.45$), $5.84{\pm}1.86$ for the Clock Drawing, and $12.58{\pm}3.29$ for the Category Fluency. Except the Benton Temporal Orientation Test, there were statistically significant differences between test scores of alcoholics and those of controls(p<0.01). 2) The alcoholics who had MMSE-K score <24 were 9.68%. The average(${\pm}S.D.$) score of the MMSE-K for the patient group($27.23{\pm}2.62$) was significantly(p<0.001) lower than that of the healthy controls($29.20{\pm}1.24$). There were no statistically significant differences between four individual test scores of the 7MS of alcoholics with the MMSE-K score <24(N=3) and those of alcoholics with the MMSE-K score ${\geq}24$(N=28). 3) Four individual test scores of the 7MS seemed to have statistically significant association with such variables as MMSE-K, duration of alcohol drinking, blood magnesium concentration, liver function and thyroid function. Conclusion : Mild deficits of cognitive areas such as orientation, memory, visuospatial abilities and verbal fluency could be found in alcohol dependence.