• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.147-153
• /
• 2008

본 연구에서는 레이더 강우를 이용하여 시공간적 변동성을 고려한 격자형 면적강우량을 산정하기 위하여 추계학적 방법인 칼만필터 기법을 이용하여 지상 강우 관측망과 레이더 강우 관측망을 조합하여 면적강우량을 산정하였다. 또한 전통적인 지상 강우량을 면적강우량으로 전환하는 기법인 Thiessen법, 역거리법, 크리깅 기법을 이용하여 면적강우량을 산정한 후 칼만필터 기법에 의해 보정된 면적 레이더 강우와 비교 하였다. 그 결과, 칼만필터 기법에 의해 보정된 레이더 강우는 실제 강우 분포와 유사한 공간분포를 가지는 원시 레이더 강우 분포를 잘 재현하면서도 강우 체적(볼륨)은 우량계 자료의 체적과 유사하게 나타났다. 그리고 칼만필터 기법에 의해 보정된 레이더 강우를 물리적 기반의 분포형 모형인 $Vflo^{TM}$ 모형과 준분포형 모형인 ModClark 모형에 적용하여 홍수유출을 모의하였다. 그 결과, $Vflo^{TM}$ 모형은 첨두시간과 첨두치가 관측 수문곡선과 유사하게 모의되었으며 ModClark 모형은 총 유출체적에서 좋은 결과를 나타냈다. 그러나 매개변수 검증에서는 $Vflo^{TM}$ 모형이 ModClark 모형보다 관측 수문곡선을 잘 재현하였다. 이를 통해 지상강우와 레이더 강우를 적절하게 조합하여 정확도 높은 면적강우량을 산정하고 분포형 수문모형과 연계하여 홍수유출모의를 실시할 경우 충분한 적용성을 가지고 있음을 확인할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.265-266
• /
• 2011

본 논문은 승압형 컨버터를 이용한 계통연계형 풍력 발전시스템의 향상된 최대전력점 추종 기법을 제안한다. 풍력 발전시스템에서 블레이드 모델 기반의 출력계수 곡선을 추종하도록 운전할 때, 불완전한 데이터 입력 및 제어변수의 변동으로 최대출력점 추종 성능이 떨어지는 문제가 발생한다. 제안하는 제어기법은 출력계수곡선 추종제어 기법에 히스테리시스 제어를 결합하여 빠른 최대출력점 추종 특성을 가지고, 시스템 제어변수 오차에 의해 이탈된 운전점을 정정하여 정상상태의 출력효율을 향상시킨다. 2.7kW급 풍력발전 시스템 모델 기반의 시뮬레이션 결과를 통해 제안하는 제어기법의 우수성을 보인다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.953-956
• /
• 2009

본 연구는 농업용저수지유역을 대상으로 분포형 강우-유출모형을 적용해 봄으로서 차후 본 연구대상유역의 분포형 강우유출모형을 이용한 설계홍수량 산정에 활용해 보기 위한 사전연구이다. 농업용저수지유역을 대상으로 모의하기 위하여 자동수위계를 통하여 저수지 수위자료가 주기적으로 기록되고 있는 계룡저수지 유역($15.4km^2$)을 선정하였으며, 주요 공간매개변수는 30m 격자해상도로 구축하였다. 관측유량자료는 수위-내용적-방류량 관계곡선에 의하여 수위변화에 따른 내용적 변화량을 유입량으로 가정하여 환산토록 하였으며, 곡선의 진동이 다소 작고 상태가 양호한 3개 강우사상을 대상으로 분석하였다. 대상유역의 2개 강우관측소(복룡, 반포)의 강우량을 IDW 방법에 의해 공간분포시켜 적용하였으며, 모형의 분석결과, 결정계수($R^2$)는 평균0.88, 용적보존지수(VCI)는 평균 0.14, 첨두유량의 상대오차 ($EQ_p$)는 평균 $0.11m^3/s$로 분석되었다.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.437-444
• /
• 1999

We propose control charts for constant hazard rate by using the number of failures based on the non-placement(replacement) life test. Also we study the sensitivity of the control chart from the operating characteristic curve.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1B
• /
• pp.29-39
• /
• 2012

Climate change has been obtained researchers' interest, especially in water resources engineering to adjust current conditions to the new circumstance influenced by climate change. In this study, WRF-ARW will be evaluated the capability to estimate distributed precipitation using global weather information instead of the data from rainfall observatory or radar. Cheongmi watershed is selected and adopted to generate a distributed rainfall-runoff model using ModClark. The results from the distributed model with precipitation data from WRF-ARW and the lumped model using observed precipitation data were compared to the observed discharge values. The final results showed that the distributed model, ModClark generated similar pattern of hydrograph to the observations in terms of the time and amount of peak discharge. In addition, the trend of hydrograph from the distributed model presented similar pattern to the observations.

• Journal of the Korean Magnetics Society
• /
• v.20 no.3
• /
• pp.94-99
• /
• 2010

Minor B-H loop measurement for a rectangular high tensile steel was obtained by using Labview. A ferrite cores of high permeance with primary and secondary windings on the steel plate were used to form a closed loop of magnetic flux. To compensate errors due to an extremely small gap between a pair of ferrite core, and between the ferrite core and the rectangular high tensile steel, quadratic function of least square method was used. Also a 3D FEM magnetic analysis tool was used to measure H and B of the steel. B-H loop of the high tensile steel plate can be measured up to 520 A/m of a magnetic field and 0.15 T of a magnetic flux density.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.17-28
• /
• 2012

In this study, we suggest a method for material property evaluation by dual-triangular pyramidal indenters using the reverse analysis. First, we demonstrated that load-displacement curves of conical and triangular pyramidal indenters are different for the same material. For this reason, an independent research on the triangular pyramidal indenter is needed. From FE indentation analyses on various materials, we then investigated the relationships among material properties, indentation parameters and load-displacement curves. From this, we established property evaluation formula using dual-triangular pyramidal indenters having two different half-included-angles. The approach provides the values of elastic modulus, yield strength and strain-hardening exponent within an average error of 3% for various materials.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.597-603
• /
• 2009

In this study, Based on the optimization developed in Um et al. (2009), optimum design method of the alignment when building new lines and renewing existing ones is presented. The object function used for optimization is passenger comfort ($P_{CT}$) which was proposed in BSI (2006). Other aspects of track/vehicle interaction will be treated in boundary conditions. And track/vehicle interaction analysis is peformed using KTX-II model. From the analysis results, it was found that the optimum alignments are affected by the angle (I) between adjacent straight lines and $R-L_t$ combinations. Also the dynamic analysis confirms well the results from the simplified analysis. However, In the most cases, the $P_{CT}$ values in the dynamic analysis are higher than the simplified $P_{CT}$ values. If both methods are used when optimizing the alignment, it will be possible to design the alignments more rapidly and reliably.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.581-592
• /
• 2007

This paper deals with the elastica of deflected cantilever column with the constant volume. The columns are subjected to combined loads consisted of an axial compressive load and a couple moment at the free end. Differential equations governing the elastica of such column are derived, in which both the effects of taper type and shear deformation are included. Three kinds of taper types are considered: linear, parabolic and sinusoidal tapers. Differential equations are solved numerically to obtain the elastica of objective columns. The effects of various system parameters on the elastica are investigated extensively. Experimental studies were carried out in order to verify the theoretical results of non-linear behavior of the elasticas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1336-1341
• /
• 2013

Through reviewing the characteristics of digital TVs, which have emerged in CES since 2005, in the view of technology growth and substitution curves, this paper is to provide a prediction on the next generation's multi-media on smart environment. As a result, digital TV has been developed on the flow of its technology growth curve from the early version in 2005 to smart digital TV in 2013, which emphasizes the key word "connected", and it has already come to the market puberty.