• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.281-286
• /
• 2001

최근, 경제적 이점과 전단강도의 증가효과로 인하여, 파형 Plate의 사용이 증가하여 있다. 일반 Plate에 대해서는 현재 거의 모든 시방서에 설계기준이 제시되어 있으나, 파형 Plate의 전단강도에 대한 규정은 제시되지 않은 실정이다. 따라서 설계자가 파형 Plate의 여러 기하 조건에 따른 전단강도의 관계를 알아보았으며, 수치해석에는 8절점 박판 쉘요소를 사용했다. 수치해석을 통하여 파형 Plate에 있어서 파형의 크기, 곡률, 파형 Plate의 두께에 따라 전단강도를 결정할 수 있는 식을 제안하였으며, 제안식은 파형 Plate가 일반 Plate에 비해 상당히 큰 전단강도를 갖는다는 것을 보여준다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.275-278
• /
• 2010

이 논문에서는, 기존에 존재하는 글자체의 커브 데이터를 분석하여 같은 글자를 붓글씨로 서예를 하듯이 다시 써낸 듯한 효과를 낼 수 있는 방법을 제안한다. 글자를 형성하는 위상적인 뼈대를 커브로 쪼개어, 글자 하나를 여러 획으로 분리하여 표현한 후에, 각 획에 해당하는 커브의 차원 수와, 길이와 곡률을 이용하여 붓의 궤적을 자동적으로 생성해 내는 방법이다. 붓의 궤적이 표현될 방법을 기존 글자 데이터를 이용해서 어떻게 조작 경로를 자동적으로 만들어 붓글씨 팔적을 생성해낼 것인지가 풀어내어야 할 문제이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.10
• /
• pp.924-931
• /
• 2015

When a target locates at low altitude over a curved earth surface and far away from a radar, we examine the accuracy of the conventional formulations to compute the radar echo signal. The 4-ray model is used to calculate the scattering by the target to consider the ground plane effect. In this paper, the diffracted wave is not included. Based on the required parameters able to be calculated by known equations for the estimation of the wave propagation phenomena, the radar echo signal is computed and verified by comparing with measured data sets.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.372-372
• /
• 2013

기존의 MOSFET 구조의 소자는 비례 축소에 의한 단 채널효과, 누설전류, 신뢰성 문제 같은 어려움에 직면해 있다. 이로 인해 20 nm 이하 소자 크기에서 기존의 MOSFET을 대체할 여러가지 차세대 소자에 대한 연구가 활발히 진행 되고 있다. 그 중에서 FinFET 소자는 비례 축소에 용이하고 누설전류 문제에 대한 장점으로 인해 활발한 연구가 진행되고 있다. 기존의 FinFET 소자에 대한 연구는 FinFET 구조를 이용한 메모리 소자의 전기적 특성의 향상, fin의 크기에 따른 소자의 특성 변화와 FinFET 구조의 물질 변화에 따른 전기적 특성 변화에 대한 연구가 많이 이루어져 왔다. 실제 공정에서의 fin의 형태 변화에 따른 전기적 특성변화에 대한 연구가 필요하다. 본 연구에서는 fin의 모서리의 모양의 변화에 따른 FinFET 소자의 전기적 특성 변화를 관찰하였고 전하 수송 메커니즘을 규명하였다. 실제 FinFET 소자의 공정에서 fin의 형태는 이상적인 직육면체 모양이 아니라 옆면이 기울고 모서리가 곡선이 되게 된다. 이로 인한 전자의 이동도 변화로 인해 소자의 성능이 변화하게 된다. FinFET의 경우 채널을 구성하는 fin의 각 면의 Si의 orientation이 다르다. 또한 fin의 모서리의 모양이 변화 함에 따라 채널영역의 orientation이 변화 하게 된다. 이에 따라 fin의 모서리 모양의 변화에 따른 소자의 전기적 특성 변화를 multi-orientation mobility model을 포함한 three-dimensional TCAD 시뮬레이션을 통해 계산하였다. 옆면과 윗면이 만나는 모서리의 모양의 곡률의 크기를 증가하여 다양한 fin의 형태에서 전기적 특성을 관찰하였다. Fin의 옆면과 윗면이 만나는 모서리의 곡률이 증가함에 따라 depletion 영역의 크기 변화와 채널에서의 전자의 밀도와 이동도의 변화를 관찰하였고 이를 토대로 fin의 형태 변화가 FinFET 소자의 전기적 특성에 미치는 영향을 조사하였다.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.423-432
• /
• 2002

This study presented analytical and numerical solutions for spatial free vibration of nonsymmetric thin-walled circular curved beams. The closed-form solutions were obtained for in-plane free vibration analylsis of monosymmetric curved beams. Likewise, two types of thin-walled curved beam elements were developed using the third and the fifth order Hermitian polynomials. In order to illustrate the accuracy and usefulness of the present method, this study presented analytical and numerical solution and compared these with the results using the ABAQUS's shell elements. In particular, effects of the thickness-curvature as well as the inextensional condition were investigated on the free vibration of curved beams with nonsymmetric sections.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.779-785
• /
• 2012

In this paper, we have analyzed the curvature effects of the finite FSS(frequency selective surface) using the 3-D method of moment using the BiCGSTab algorithm as an iterative method. To validate the analysis method in this paper, we compared the RCS(radar cross section) of PEC(perfect electric conductor) sphere with theoretical results and it shows well agreements. The tripole slot FSSs which have many application in military were selected for the investigation of curvature effect and RCS as a frequency characteristics were observed with the variation of the curvature rate. Simulation results shows that curvature effect can significant effect the passband frequency and bandwidth of FSS. We suggest that the curvature effect must be considered at the stage of design FSS application like FSS radome.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.366-373
• /
• 2013

This paper discusses the singly curved phased reflector for reduced RCS pattern, which has minimized RCS level at boresight with a null by phase cancelation and the lowered RCS level of main beam by splitting the main beam into multi directions. Considering the reduced level of boresight and main beam compared to the same sized reference PEC, this proposed multi-beam reflector can be adopted in the mono-static radar and the bi-static radar environment. The proposed reflector is a multi-beam reflector, which has different phase distributions at each row for different steering angle. It is designed through an intermediate stage of a single and dual-beam reflector. The behaviors of the designed reflectors are verified through full-wave simulation and experiment. The reflectors are designed in the frequency of 10 GHz and it has a size $240{\times}180mm^2$($8{\times}6\;{\lambda}^2$) with the curvature k=3.3. From the measured results, the proposed reflectors reduce the reflected power by 17 dB at boresight.

• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.3
• /
• pp.7-15
• /
• 2009

Purpose: To investigate the corneal recovery after discontinuing orthokeratology (OK) lenses wear in children for long-term period. Methods: Among the OK lens wearers who wear over 8 months and showed successful refractive correction, 25 subjects were selected who want to discontinue the OK lenses. Uncorrected visual acuity, refractive correction, corneal curvature (Sim K), central corneal thickness and corneal eccentricity were measured during the OK lens wearing period and after discontinuation for 1 month. Results: Uncorrected visual acuity and corneal shape had remodeled significantly during the OK lens wear and recovered significantly during the first week of discontinuation. Uncorrected visual acuity and refractive correction had achieved full recovery 2 weeks after discontinuation of lens wear and were highly correlated with the changes in corneal thickness. But corneal shape recovered slowly, eccentricity had recovered fully after 1 month and corneal curvature and central thickness had not been achieved full recovery until 1 month after discontinuation. Conclusions: Recovery of after longterm use of OK lens is rapid for refractive change, but slow for corneal curvature and central thickness that to refit the contact lenses, practitioners need patience.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.927-933
• /
• 2012

The characteristics of two-dimensional supersonic coanda flow was experimentally investigated. For various ratios of slot height to coanda wall's radius of curvature, surface roughnesses, and jet stagnation pressures, the characteristics of the supersonic coanda flow such as shock structures and hysteresis were observed by flow visualization. It was found that the characteristics of hysteresis of the coanda jet was related to the surface roughness of the coanda wall. The study was further extended for application of the tangentially injected coanda jet to control co-flowing highly compressible main jet direction. It was noticed that the stagnation pressure of the main jet as well as the ratio of the slot height to coanda wall's radius of curvature wall was an influencing factor in the performance of the fluidic thrust vectoring method.

• Environmental and Resource Economics Review
• /
• v.19 no.4
• /
• pp.915-961
• /
• 2010

This study is concerned with health damages from $SO_2$ under different assumptions on the relationship between air concentrations and their marginal health impacts. $SO_2$ concentration profiles resulting under emission caps, and a system of tradable emission allowances are compared. Using slopes and curvatures of the health response function consistent with evidence in medical literature, emission caps are shown to lead to lower aggregate damages under all considered parameters, an advantage of $26~452 million. The benefit of emission caps over tradable allowances increases with the curvature of the response function, but falls with its slope. The advantage of emission caps in terms of environmental damages is never overturned completely for the considered functional forms. The marginal damage function would have to be steeper than what the current medical evidence suggests for price instruments to outperform emission caps in terms of aggregate damages. With other welfare consequences included-emission abatement costs, consumer and producer surpluses, and government revenue-emission caps always lead to a $3.7~4.1 billion greater measure of social welfare.