• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.446-447
• /
• 2010

본 논문에서는 전동기의 고정자 권선 절연파괴 고장을 분석하고 자기 인덕턴스 변화의 비선형성을 고려하기 위해 FEM 시뮬레이션을 이용하여 고장 현상을 해석하고, 실험을 통해 검증하였다. 제안한 고장의 모델링을 통하여 고정자 권선에서 단락이 발생하면 단락된 권선의 순환전류에 의해 고정자에 자기 포화현상이 발생하고, 입력전류의 불평형에 의하여 평균토크가 감소하고, 토크리플이 증가함을 확인 하였다.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2313-2315
• /
• 2002

본 논문에서는 3상 유도 전동기 고정자 전류 신호로부터 고정자 권선 고장에 대한 특성주파수를 효과적으로 검출하기 위한 고정자 전류 신호 해석 기법을 제시하였으며, 인위적인 턴 대 턴 고장 전동기의 부하실험을 통해 제안된 기법의 유효성을 확인하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.731-734
• /
• 2002

이동망 착신접속료의 합리적 산정, 이동망 설비 공동사용 대가 산정 및 보편적서비스 비용산정 둥 다양한 필요성에 따라 이동망 원가를 합리적으로 산정하기 위한 다양한 방법과 모형들이 제시되고 있다. 하지만 대부분 이미 개발된 고정망의 원가모형을 변형하여 이동망에 적용하고 있는 실정이다. 분명히 이동망과 고정망은 기술적 차이로 인하여 원가구조에 미치는 영향이 서로 다르다. 본 고에서는 합리적인 원가모형 구축을 위해 이동망의 망 구조와 구성요소, 서비스 원가 계산을 위한 원가추정 접근방법들을 통해 고정망과의 차이점을 살펴보고자 한다.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.19.3-19
• /
• 1983

Congenital stapes fixation may develop alone or with other systemic anomalis. Acquired stapes fixation is found in otosclerosis or in chronic otitis media. It is our intent to review 4 cases (5ears) of congenital stapedial fixation and 2 cases (2 ears) of acquired stapedial fixation following chronic otitis media, treated by stapedectomy.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.306-309
• /
• 2003

핵폐기물의 재처리과정에서 파생리는 액상의 고준위 폐기물 (sludges)은, 매우 위해한 핵종원소를 포함하고 있으므로 이들 핵종을 고정화시킬 수 있는 물질이 요구된다 핵폐기물을 구성하고 있는 방사성 원소를 일련의 광물조합 내에 고정화시키려는 시도는 Hatch (1953), McCarthy (1973, 1974), Mccarthy와 Davidson (1975), Roy (1975, 1977)에 의해 연구되었으며 현재는 borosilicate 및 aluminophosphate glass 등에 의한 고정화 방법이 널리 사용되고 있다. (중략)

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.73-84
• /
• 2007

The maxillary protraction headgear has been widely used in the treatment of skeletal Class III children with maxillary deficiency. A variety of treatment objectives which allow dentoalveolar movements may be established, but when only maxillary protraction without dentoalveolar movement is needed, one of the limitations in maxillary protraction with conventional tooth-borne anchorage is the loss of dental anchorage. This is because a bone remodeling occurs not only at circummaxillary sutures but also within the periodontal tissues. During protraction treatment in the mixed dentition phase, in older children or for the patient with multiple congenitally missing teeth, it is not uncommon to observe undesirable mesial movement of maxillary teeth. Such a side effect can be eliminated or minimized using absolute anchorage such as skeletal anchorage. The purpose of this case report is to introduce a new technique of the maxillary protraction headgear treatment using surgical miniplates.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.145-152
• /
• 2020

In this study, we evaluated spinal stability based on the change in the thoracolumbar fixation segment using finite element analysis (FEA). To accomplish this, a finite element (FE) model of a normal thoracolumbar spine (T10-L4), including intervertebral discs (IVD), ligaments, and facet joints, was constructed, and the material properties reported in previous studies were implemented. However, L1 was assumed as the lesion site, and three types of posterior fixation, namely, L1-L2, T12-L2, and T12-L1-L2, were implemented in the thoracolumbar FE model. In addition, the loading conditions for flexion, extension, lateral bending, and axial rotation were adopted. Through the series FEA, the deformation, equivalent stress, range of motion, and moment on the pedicle screws, vertebrae, and IVD were calculated, and the spinal stability was evaluated based on the FEA results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.403-409
• /
• 2017

In the case of an extraction in the maxillary anterior region, immediate placement of implant-supported fixed prosthesis can be considered as a treatment option. Fewer surgical operations, reduced treatment time, and optimal availability of existing bone are obvious advantages of the method; however, when applied in the continuous maxillary anterior region, inter-implant distance must be carefully considered, as well as accurate diagnosis and treatment planning for predictable outcome. In this case report, immediate placement of two implants in the continuous maxillary anterior along with bone graft following the extraction of root rests, and the restoration of provisional and implant-supported fixed prosthesis on a 63-year-old patient had resulted in both esthetically and functionally satisfactory clinical outcomes.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.196-207
• /
• 2018

An accurate implant placement with ideal location is significant for long-term success of the implant. An exact evaluation of nearby anatomic structures such as quality of residual bone, an inferior alveolar bone and a maxillary sinus is required. For a prosthetic-driven treatment, planned surgery, precise prosthesis and communication with the patient are significant requisites especially for full-mouth rehabilitation. In this case, the patient with severe alveolar bone resorption had a CT guided surgery supported by CT data and the data from scanning diagnostic wax-up. Afterward, edentulous area was restored by full mouth implant-supported prosthesis by using monolithic zirconia and CAD/CAM technique. This paper reports the outcome of the procedure which was remarkable both esthetically and functionally.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.458-464
• /
• 2004

Anchorage plays an important role in orthodontic treatment especially in the maxillary arch. In spite of many efforts for anchorage control. it was difficult for clinicians to predict the result of treatment because most of the treatment necessitated an absolute compliance of patients, But recently, skeletal anchorage has been used widely because it does not necessitate patient compliance but produces absolute anchorage. In addition titanium miniscrews have several advantages such as ease of insertion and removal. possible immediate leading and use in limited implantation spaces. In this case, a skeletal Class I bialveolar protrusion Patient was treated with standard edgewise mechanics using indirect active P.S.A. (palatal skeletal anchorage). The miniscrews in the paramedian area of the hard palate provided anchorage for retraction of the upper anterior teeth and remained firm and stable throughout treatment This indicates that the PSA can be used to reinforce anchorage for orthodontic treatment in the maxillary arch Consequently, this new approach can help effective tooth movement without patient compliance, when used with various transpalatal arch systems.