• Proceedings of the Korean Vacuum Society Conference
• /
• 1993.02a
• /
• pp.59-59
• /
• 1993

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.383-392
• /
• 2007

Karstic features and mining-related cavities not only lead to severe restrictions in land utilizations, but also constitute serious concern about geohazard and groundwater contamination. A microgravity survey was applied for detecting, mapping and monitoring karstic cavities in the test site at Muan prepared by KIGAM. The gravity data were collected using an AutoGrav CG-3 gravimeter at about 800 stations by 5 m interval along paddy paths. The density distribution beneath the profiles was drawn by two dimensional inversion based on the minimum support stabilizing functional, which generated better focused images of density discontinuities. We also imaged three dimensional density distribution by growing body inversion with solution from Euler deconvolution as a priori information. The density image showed that the cavities were dissolved, enlarged and connected into a cavity network system, which was supported by drill hole logs. A time-lapse microgravity was executed on the road in the test site for monitoring the change of the subsurface density distribution before and after grouting. The data were adjusted for reducing the effects due to the different condition of each survey, and inverted to density distributions. They show the change of density structure during the lapsed time, which implies the effects of grouting. This case history at the Muan test site showed that the microgravity with accuracy and precision of ${\mu}Gal$ is an effective and practical tool for detecting, mapping and monitoring the subsurface cavities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.146-152
• /
• 2016

This paper describes a multi-physics analysis of a high resolution winding type resolver and rotary transformer using FEM (Finite Element Method). The rotary transformer boosts the input voltage to a high voltage which can be input into the rotor windings of the resolver. Through multi-physics models of the transformer and resolver, the characteristics of the output signals for the resolver system with high resolution can be derived. Moreover, the circuit model of the interface part between the transformer and resolver should be considered, because of the calculation of the input current to the resolver. The winding type resolver is composed of 32x and 1x stator windings for high resolution. Then, the output signals of the stator windings, which make sinusoidal SIN and COS waves with a $90^{\circ}$ phase difference, are verified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.512-518
• /
• 2003

Position controls are very important in semiconductor manufacturing devices, machine tools Precision measuring instruments, etc. To measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those Precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. In this paper, a novel encoder of digital and analog hybrid type is proposed. It is shown that from this experiment a high-resolution angle measurement device can be designed by a low cost incremental encoder.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1866-1870
• /
• 2005

Typical small desktop robots have limied application due to their intrinsic feaures like friction, backlash, etc. However, a newly developed small gantry desktop robot needs smaller footprint and shows better performance in position accuracy, velocity, and acceleration. In order to achieve such results, synchronization control of two axes, position compensation methods in plane are suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.161-167
• /
• 1999

This paper describes the calibration method and the calculation equations of expanded uncertainty for a precision electric force measuring device. The calibration of the electric force measuring device is performed three times (0 ${\circ}$(first time), $120{\circ}$(second time), $240{\circ}$(third time)) at each calibration point. It is usually selected ten points from zero load to rated load of the electric force measuring device. The expanded uncertainty is calculated by combining A type standard uncertainty and B type standard uncertainty. The calibration method and the calculation equations of expanded uncertainty can be widely used in the calibration of the precision electric force measuring device.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.477-478
• /
• 2011

본 논문에서는 신재생 에너지를 전력 계통에 효율적으로 연계시키기 위한 요소 기술로 Filter 대신 DFT 기법을 사용한 고정밀 계측에 대해 제안한다. 일반적으로 Filter를 사용할 경우 원신호의 위상 지연, 크기 감소 같은 신호 왜곡으로 정확한 제어가 어려우나, 제안된 DFT 기법을 사용하면 기존 문제점을 해결 가능하다. 따라서 본 논문에서 제안된 DFT 기법은 PSIM을 이용한 시뮬레이션과 실험을 통해 제안된 알고리즘의 타당성과 우수성을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.13-19
• /
• 2003

산업의 발달과 더불어 초소형, 고정밀 제품에 대한 수요가 증가함에 따라 이를 가공할 수 있는 마이크로 가공기술 및 초정밀 공작기계를 구현할 수 있는 설계기술이 국가 경쟁력을 결정하는 핵심 기술로 인식되기에 이르렀다. 공작기계의 성능은 주축계 설계 및 제작기술, 이송계 설계 및 제작기술, 오차 보상기술, 베드 구조물 설계 및 방진기술, 시스템 종합기술 등에 의해 결정되며, 이중에서도 주축계의 설계 및 제작 기술은 가공정밀도 및 생산기술을 주도하는 핵심기술이라 할 수 있다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.82-88
• /
• 1997

In this paper, the development of a precision CNC lathe prototype for mirror surface machining is presented. To obtain high precision machining accuracy, a hydrostatically supported precision spindle and a sliding guideway with turcite pad are adopted as the motion elements. The machining accuracy of the prototype machine, and the motional accuracy of its motion elements are tested and evaluated to confirm the validity of the application of these elements on the prototype. The hydrostatic spindle shows 0.09 .mu. m of rotational accuracy and the guideway shows about 0.8 .mu. m/170mm of horizontal straightness. The sur- face roughness of cupper and aluminium cylinder machined by the prototype machine with diamond tool are 0.07 .mu. m and 0.10 .mu. m Rmax respectively. From these results, it is verified that the prototype lathe is avail- able for high precision machining.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.30-30
• /
• 2003

GPS와 VLBI와 같은 우주측지 기술을 이용한 정밀 측위는 수 mn 정밀도의 관측소 좌표결정과 1 mm/year 정도의 고정밀 속도결정에 이용된다. 이를 위해서는 여러 가지 오차 요인들과 다양한 물리적 현상에 대한 모델링이 이루어져야 한다. 그 중의 하나가 해수 하중(ocean loading)에 의한 수직방향의 지각변위이다. 특히 한반도의 서해안은 복잡한 리아스식 해안으로 이루어져 있고, 조수간만의 차이가 크기 때문에 현존하는 모델의 정확도가 떨어진다. KVN(Korean VLBI Network)사업에서 추진하는 3기의 VLBI 중 2기가 서울과 제주도에 설치될 계획이므로, 해수하중에 의한 지각변위에 관한 연구가 선행되어야 한다. 또한 국내 GPS상시관측소의 많은 수가 서해안 지역에 설치되어 있다. 본 연구에서는 서해안 지역의 해수하중에 의한 수직방향의 지각변위를 GPS로 관측하고 이를 서해안 해수조류 모델의 정밀도를 향상시키는데 필요한 기초연구를 수행하였다. 서해안의 4개 GPS 관측소 위치에서의 해수하중에 의한 지각변위를 계산해본 결과 인천 지역에는 3 cm에 육박하는 지각변위가 수직으로 발생함을 알 수 있었다. 같은 크기와 위상의 지각변위 진폭을 GPS로 검출하기 위한 여러 가지 오차 보정과 GIPSY를 이용한 고정밀 키네마틱 GPS 자료처리에 대하여 상세히 소개한다.