• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4080-4086
• /
• 2010

In this study, a scanning fixture for flexible parts such as large automotive panels is developed. For the minimization of the weight deflection of a hood outer panel, the N-2-1 fixture principle for flexible parts is adopted in the fixture design. The designed fixture for a hood outer panel is fabricated using the Alufix system. The springback of the entire hood outer panel can be measured successfully by the laser scanning with the developed fixture, which verifies the usefulness of the proposed design method for the flexible panels.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.463-469
• /
• 2018

A currently used roof green system with multi layers has a low constructability. Therefore a new integrated waterproof & root barrier sheet and roof green box unit system was developed using steel plate fixture and cone type fixture by electromagnetic induction heating method. This study was proceeded to evaluate adhesion performance of two types of fixtures on Engineering PE, TPO, PVC sheet in a normal condition, repeated heating and cooling condition. As a result, adhesion load on Engineering PE sheet showed the highest value. The adhesion loads of steel plate fixture showed higher value as heating temperature was getting higher. However adhesion loads of cone type fixture showed opposite tendency. Regarding to the test conditions, test results of normal condition, repeated heating and cooling condition showed same value. The cone type fixture using butyl tape showed 7 times lower adhesion load than that of cone type fixture using electromagnetic heating and 28% lower adhesion load in a repeated heating and cooling condition than a usual condition.

• Composites Research
• /
• v.32 no.4
• /
• pp.171-176
• /
• 2019

In this paper, the strength of the composite securement device was characterised by FE analysis. Preliminary frontal crash analysis for the vehicle, equipped with the conventional steel securement device, was carried out according to the ISO 10542 for special transportation to obtain loading data, which were applied to securement device during crash. The securement device consists of block, guide and rail and the weight fraction of rail was the highest among them, therefore, it is desirable to reduce weight of rail by applying carbon/epoxy composite. Also, it was found that 27% of lightweight effect was obtained by hybrid rail that bottom part was replaced by a composite compared to the conventional rail, i.e., made of SAPH 440, without sacrificing the structural strength.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.719-725
• /
• 2017

막전압 고정 기법은 세포막 이온통로의 활성화 게이트, 비활성화 게이트의 물리적 성질 등을 밝힐 수 있다. 즉, 여러 다양한 펄스 프로토콜을 이용하여 활성화 게이트와 비활성화 게이트의 막전압 의존성을 구할 수 있다. 본 연구는 L-type $Ca^{2+}$ 통로의 모델을 막전압 고정 기법 시뮬레이션에 적용하여 최적의 펄스 프로토콜을 얻기 위한 방법을 제시하고자 하였다. 비활성화 게이트의 막전압 의존성을 구하는 경우, 테스트 전압에서 +10 mV의 전압으로 가기 전에 0 ms, 5 ms, 20 ms의 gap을 주었는데 이 중 5 ms의 gap을 주었을 때 모델과 가장 가까운 관계를 얻을 수 있었다. 다음으로 활성화 게이트의 막전압 의존성을 구하는 경우, 일반적인 방법으로는 실제 관계와 크게 다른 결과를 얻었으나, 0 mV 이하의 막전압에 대해서만 막전압 의존성을 구하는 방법을 사용하여 실제 관계와 근접한 결과를 얻을 수 있었다. 따라서, 본 시뮬레이션 프로그램을 적절히 이용한다면 실제 세포실험에서 정확한 수치를 얻기 위한 펄스 프로토콜을 얻는데 활용할 수 있을 것으로 본다.

• The Korean Journal of Applied Statistics
• /
• v.30 no.3
• /
• pp.335-344
• /
• 2017

This paper discusses a method of analyzing data from split-plot experiments by projections. The assumed model for data has two experimental errors due to two different experimental sizes and some random components in treatment effects. Residual random models are constructed to obtain sums of squares due to random effects. Expectations of sums of squares are obtained by Hartley's synthesis. Estimable functions of fixed effects are discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.89-95
• /
• 2014

The increasing level of demand for multi-tasking machines requires a saddle with an ultra-precise machining accuracy level of $15{\mu}m$, as such a saddle is one of the main components of these machines. The manner of achieving ultra-precise machining accuracy mainly depends on the fixed forces. In this paper, we optimized the number of contact points and the contact positions to reduce the deformation of the saddle while it is machined. The performance levels of the proposed optimal jig and fixture are determined by measuring the flatness, parallelism and perpendicularity of a machined saddle. The machining accuracy is found to be lower than $15{\mu}m$ at all measured points.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.180-186
• /
• 1984

From June, 1980 to October, 1982, this study was carried out to find an optimal grazing system on the timothy and orchardgrass-dominated pasture. Five different systems consisted of set stocking, modified set stocking, rotational grazing, 'wye college' system and zero grazing have been applied. The results obtained were as follow: 1. Herbage DM yield per ha with 'wye college' system, set stocking, modified set stocking, rotational grazing and zero grazing were 6936.7 kg,6794.3 kg, 6686.9 kg 6675.7 kg and 5083.4 kg respectively. Among treatments were not different in DM yield. 2. In herbage utilization, zero grazing was the highest than other. Zero Grazing, Rotational grazing, 'Wye college' system, Modified set stocking and set stocking was 89.3%, 70.8%, 64.4% and 46.1% respectively. 3. Daily intake per head with 'wye college' system was the highest than others and zero grazing was the lowest than others. 4. Daily gain with 'wye college' system, rotational grazing, modified set stocking, set stocking and zero grazing were 0.60kg, 0.55kg, 0.50kg, 0.43kg and 0.42 respectively. Among treatment, there was no significance. 5. Total weight gain per ha with 'wye college' system, rotational grazing, modified set stocking, zero grazing and set stocking were 339.5kg, 299.1kg, 253.3kg, 226.6kg and 222.2kg respectively. 6. Grazing time among treatments was not significant. 'Wye college' system spent the shortest time, 367.3 minutes and set stocking consumed the longest time, 422.1 minutes. 7. Daily grazing time by seasonal change with June, July, August, September and October was 304.9 min., 359.4 min., 437.9 min., 483.3 min. and 395.8 min., respectively. According to passing the season, grazing time was lengthened. 8. Grazing time for Korean native cow, native cow charolais and native cow holstein were not significant. Native sow charolais consumed the longest time, 457.0 min., whereas Korean native cow consumed the shortest time, 422.4 min..

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.279-289
• /
• 1998

To monitor vegetation structure of evergreen broad-leaved forest, twenty plots were set up at Wando Arboretum in 1996. Twenty plots were divided into ten experimental plots and control plots. A few evergreen broad-leaved species were planted after selective cutting at ten experimental plots. Dominant species of twenty plots were Quercus acuta, Q. acuta and Carpinus tschonoskii, Pinus densiflora, etc.. Vegetation structure of the experimental plots showed seral stage of succession from P. densiflora community or deciduous broad-leaved forest to Q. acuta community. Dominant species of the experimental plots were changed to Q. acuta or P. densiflora after selective cutting. And a number of species and individuals, coverages etc. were increased at shrub and ground cover layer after treatment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.1-10
• /
• 2011

This study was conducted to compare the growth of Zoysia japonica depending on different soil treatments in Saemangeum sea dike, which is filled with dredged soil. Zoysia japonica was planted using sod-pitching method on the control plot. On plots which were treated with forest soil and soil improvement, Zoysia japonica seeds were sprayed mechanically. Sixteen months after planting, coverage rate, leaf length, leaf width, and root length were measured and analyzed. Also, three Zoysia japonica samples per plot were collected to analyze nutrient contents. Coverage rate was 100% in B treatment plot(dredged soil+$40kg/m^3$ soil improvement+forest soil), in C treatment plots (dredged soil+$60kg/m^3$ soil improvement+forest soil), and D treatment plots (dredged soil+$60kg/m^3$ soil improvement), while only 43% of the soil surface was covered with Zoysia japonica on control plots. The width of the leaf on C treatment plots (3.79mm) was the highest followed by D treatment (3.49mm), B treatment (2.40mm) and control plots (1.97mm). Leaf and root length of D treatment was 30.18cm and 13.18cm, which were highest among different treatments. The leaf length of D treatment was highest followed by C, B, and A treatments. The root length of D treatment was highest followed by C, A, and B treatments. The nitrogen and phosphate contents of the above ground part of Zoysia japonica were highest in C treatment, followed by D, B, and A treatments. The nitrogen and phosphate contents of the underground part of Zoysia japonica were highest in D treatment, followed by C, A, and B treatments. C and D treatments showed the best results in every aspect of grass growth. The results of this study could be used to identify the cost effective way to improve soil quality for soil surface fixation on reclaimed areas using grass species.

• 대한치주과학회:학술대회논문집
• /
• 2006.05a
• /
• pp.14-14
• /
• 2006