• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.407-414
• /
• 2004

Bridges in common use are expected to have more varieties of load in their connected members and bolts than in construction. Faults in connection members or bolts occur so often according to the time flow. One of the purposes of this study is to find out the behavior and structural features of high-tension bolted joints with faults that are very difficult and cost much to find out through experimentation with finite element analysis. Another purpose of this study is to provide sufficient data, estimated experimental results, and the scheme of the test plate for an economical experimental study in the future. Surveys of bridges with a variety of faults and statistical classifications of their faults were performed, as was a finite element analysis of the internal stress and the sliding behavior of standard and defective bridge models. The finite element analysis of the internal stress was performed according to the interval of the bolt, the thickness of the plate, the distance of the edge, the diameter of the bolt, and the expansion of the construction. Furthermore, the analysis explained the sliding behavior of high-tension bolt joints and showed the geometric non-linear against the large deformation, and the boundary non-linear against the non-linear in the contact surface, including the material non-linear, to best explain the exceeding of the yield stress by sliding. A normally bolted high-tension bolt joint and deduction of bolt tension were also analyzed with the finite element analysis of bridge-sliding behavior.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.1-8
• /
• 2023

If there is a defect in the wheel bearing, which is a major part of the car, it can cause problems such as traffic accidents. In order to solve this problem, big data is collected and monitoring is conducted to provide early information on the presence or absence of wheel bearing failure and type of failure through predictive diagnosis and management technology. System development is needed. In this paper, to implement such an intelligent wheel hub bearing maintenance system, we develop an embedded system equipped with sensors for monitoring reliability and soundness and algorithms for predictive diagnosis. The algorithm used acquires vibration signals from acceleration sensors installed in wheel bearings and can predict and diagnose failures through big data technology through signal processing techniques, fault frequency analysis, and health characteristic parameter definition. The implemented algorithm applies a stable signal extraction algorithm that can minimize vibration frequency components and maximize vibration components occurring in wheel bearings. In noise removal using a filter, an artificial intelligence-based soundness extraction algorithm is applied, and FFT is applied. The fault frequency was analyzed and the fault was diagnosed by extracting fault characteristic factors. The performance target of this system was over 12,800 ODR, and the target was met through test results.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.1
• /
• pp.25-31
• /
• 2007

헬리콥터와 같이 비행 중 고장 또는 작동 불능 시 대처가 용이하지 않고 대형의 참사로 이어지는 비행체에 대해서는 안전이 최우선으로 고려되어야 한다. 미국의 국가교통안전위원회에서는 1963년부터 1997년까지 34년간 민간부문의 회전익기의 사고를 조사하여 분석한 바 있다. 본 논문은 터빈엔진 헬리콥터의 사고 동향을 파악하여 헬리콥터 안전 운항에 기여하고, 또한 한국형 중형 민수헬기를 개발하기에 앞서 주요 설계요소를 고려하기 위하여 NTSB에서 미국의 민수용 단발 및 쌍발 터빈 엔진 헬리콥터 사고에 대하여 유형별로 집계, 조사한 결과를 인용하여 전반적인 사고 경향, 사고 유형 또는 원인, 활동별, 운용 단계 별에 사고에 대하여 심층적으로 비교, 분석하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3D
• /
• pp.205-212
• /
• 2012

The national highway traffic counts system consists of short duration counts and continuous counts. Unlike continuous counts, short duration counts are performed by collection of a few days period and thus, the magnitude of deviation of collected data from AADT varies depending upon when data collection takes place. Therefore, this study was done to find out the best months and days of data collection of each highway classification in order to enhance the accuracy of AADT estimation. Continuous counts, another type of the national traffic counts system, are performed by collection of 365-day period using a permanent traffic counter. Therefore, it is necessary to keep the number of days for which the counter malfunctions to a minimum in order to enhance the accuracy of data. However, from time to time the permanent traffic counter malfunctions due to various causes and thus, cannot collect data. Therefore, this study was done to find out whether the age of counter, the ratio of heavy vehicle volume to total traffic volume, etc. could be the direct causes of counter's malfunction based on the number of maintenance for a certain time period.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.2
• /
• pp.190-197
• /
• 1994

In this paper, 2513 marine casualties occurred in Korean waters, during 1989-1993, were analysed by the Multivariate Data Analysis Method. The main results obtained were as follows : 1. Moat of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance. Engine trouble accounted for main patten of accidents and great number of accidents occurred in fishing vessels. 2. From the point of view of the damage of human life and properties, accidents took place in cargo ships, passenger ships and tankers were serious, but in fishing vessels, those were not so serious. 3. Grounding, collision mainly resulted from careless operation, however flooding and capsizing were much affected by bad weather and material defect.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.3
• /
• pp.291-300
• /
• 1999

멀티미디어 서비스환경에서는 수백에서 수천의 클라이언트들이 하나의 서버에 접속되기 때문에 서버 결합이 미치는 영향이 상당히 크다. 이러한 결함은 단지 서버 자체의 장애로 끝나는 것이 아니라 그로 인해 서비스 제공자들에게 유형.무형의 막대한 재산상의 피해를 가져올수 있다. 본 논문에서는 멀티미디어 서버를 구성하고 있는 자원(프로세서, 디스크, 네트워크)의 결함 발생을 고려한 큐잉 네트워크 모델을 개발하였다. 복수개의 M/M/1 큐를 큐잉 네트워크로 연결하여, 각 자원에 대한 접근 및 서비스를 모델링하였으며, 각 자원에서의 서비스 시간 지연 비율(큐의 응답시간)의 조정을 통해서, 서버 자원의 결함 발생을 고려하였다. 고객 도착률과 자원 고장률 변동에 대한 서버 자원의 이용률과 큐의 길이를 구하여 효율적인 시스템 구성 자원의 부분별 용량을 산정하였으며 , 또한 데이터 패킷 응답 시간 분포 및 고장률 변화에 따른 시스템의 신뢰도 수준을 계산하였다. 이와 같은 서비스 시스템 성능에 관련된 파라미터 분석을 통하여 멀티미디어 데이터 서비스 수준 (Quality of Service)에 중요한 영향을 미치는 서버 설계 요소를 파악하였고, 시뮬레이터 패키지를 활용한 모의 실험을 통하여 개발된 큐잉 네트워크 모델의 정확성을 검증하였다.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1342-1350
• /
• 2015

Due to rapid development of mobile device technologies, the mobile banking through Internet has become a major service of banking information systems as a security-critical information systems. Recently, lots of mobile banking information systems which handle personal and transaction information have been exposed to security threats in vulnerable security control and management processes, mainly software systems. Therefore, in this paper, we propose a process model for software security improvements in mobile banking information system by application of fault tree analysis(FTA) and failure modes and effects analysis(FMEA) on the most important activities such as 'user authentication' and 'access control' and 'virus detection and control' processes which security control and management of mobile banking information systems are very weak.

• Journal of the Korean Society for Railway
• /
• v.9 no.6 s.37
• /
• pp.739-745
• /
• 2006

The role of maintenance in railway is going to be extended to improve the reliability of railway system in the aspect of Asset management gradually. In this paper, the meaning of reliability and safety in RCM which has been applied in order to improve the efficiency of maintenance is deduced. And the analysis task of reliability and safely which has been recommended in railway standards such as EN50126 and IEC62278 is reviewed in the aspect of RCM. Finally, the several ways are proposed to apply RCM to railway system through the comparison between the RCM procedure and the analysis procedure for the reliability and safety in railway standards. Hereafter, if the analysis of reliability and safety is performed with the concept of RCM in the beginning of railway business, it will be more efficient to improve the reliability and manage the railway asset.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.3
• /
• pp.303-307
• /
• 1990

In this paper, the factors of 1680 marine casualties occurred during 1986-1988 are analysed by the Principal Component Analysis. The main results are as follows: 1. Most of marine casualties result from the human factors such as careless operation and insufficient engine maintenance. Engine trouble is main part of accidents and great number of accidents is rated for fishing vessels. 2. Accidents are serious in case of cargo ships, passenger ships and tankers from the point of view of the damage of human life and properties. On the other hand, those are not so serious matter in case of fissing vessels and governmental vessels. 3. Grounding, collision and capsizal mainly result from careless operation, however material defect result in flooding

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.345-346
• /
• 2008

최근에 콘덴서 뱅크에서 자주 일어나는 고장의 유형은 콘덴서의 내부절연파괴, 리액터의 소손이 주를 이루고 있다. 그중에서 콘덴서 셀의 절연파괴가 수대에서 십 수대까지 동시에 발생하기도 한다. 이러한 현상의 대부분은 차단기의 투입 시 서지전압과 전류에 의해 서서히 진행 혹은 갑작스런 고장으로 진행되고 있다. 이중에서 저항기의 절연열화가 진행되면 차단기 투입 시 순간적인 절연파괴를 일으켜 급준파의 전류를 더 급준하게 만들면서 콘덴서나 리액터의 열화를 더욱 더 가중시키며 순간적으로 저항기의 역할을 못하게 되어 안정상태를 더욱 해치는 역할을 수행하게 된다. 이 논문에서는 콘덴서 뱅크와 중성점 저항기의 특성을 분석하고 중성점 저항기의 절연성능을 보강하여 전, 후의 서지전류 특성을 비교함으로써 실제 계통에서 중성점 저항기의 절연열화가 콘덴서 뱅크에 미치는 영향에 대해서 알아보고자 한다.