• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.180-185
• /
• 2000

An interface V-notched crack problem can be formulated as a eigenvalue problem. there are the eigenvalues which give stress singularities at the V-notched crack tip. The RWCIM is a method of calculating the eigenvector coefficients associated with eigenvalues for a V-notched crack problem. Obtaining the stress intensity factors for an interface crack in dissimilar materials is examined by the RWCIM. The results of stress intensity factors for an interface crack are compared with those of the displacement extrapolation method by the BEM

• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.196-204
• /
• 2010

In this paper, we develope a defect inspection method for each buttons of keypad of cellular phones before they are assembled. The proposed algorithm consists of the similar color checking and its classification, font error detection, and scratch detection based on the segmentation of keypad area and font, translation and rotation processing sequentially. Especially, the proposed segmentation method approximate the pad region as B-spline function to deal with illumination change due to the shape of key button with the slant and curved surface followed by simple thresholding. And also, the rotational information is obtained by using eigen value and eigen vector very fast and effectively. The experimental results show that the performance of the proposed algorithm is good when it is applied to in-line process.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.4
• /
• pp.19-26
• /
• 2012

For a seismic design or performance evaluation of a structure, an experimental investigation on a scale model of the structure or numerical analysis based on the finite element model is considered. Regarding the numerical analysis, a three-dimensional finite element analysis is performed if a high accuracy of the results is required, while a sensitivity or fragility analysis which uses huge seismic ground motions leads to the use of a lumped-mass stick model. The conventional modeling technique to build the lumped-mass stick model calculates the amount of the lumped mass by considering the geometric shape of the structure, like a tributary area. However, the eigenvalues of the conventional model obtained through such a calculation are normally not the same as those of the actual structure. In order to overcome such a deficiency, in this study, a new lumped mass stick model is proposed. The model is named the "frequency adaptive-lumped-mass stick model." It provides the same eigenvalues and similar dynamic responses as the actual structure. A non-prismatic column is considered as an example, and its natural frequencies as well as the dynamic performance of the new lumped model are compared to those of the full-finite element model. To investigate the damping effect on the new model, 1% to 5% of the critical damping ratio is applied to the model and the corresponding results are also compared to those of the finite element model.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.28-35
• /
• 2013

The Krylov-Schur algorithm has been applied to reveal the eigen-properties of the wave guide having the square cross section. The eigen-matrix equation has been constructed from FEM with the basis function of the tangential edge-vectors of the triangular element. This equation has been treated firstly with Arnoldi decomposition to obtain a upper Hessenberg matrix. The QR algorithm has been carried out to transform it into Schur form. The several eigen values satisfying the convergent condition have appeared in the diagonal components. The eigen-modes for them have been calculated from the inverse iteration method. The wanted eigen-pairs have been reordered in the leading principle sub-matrix of the Schur matrix. This sub-matrix has been deflated from the eigen-matrix equation for the subsequent search of other eigen-pairs. These processes have been conducted several times repeatedly. As a result, a few primary eigen-pairs of TE and TM modes have been obtained with sufficient reliability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.450-457
• /
• 2012

For orthogonal frequency-division multiplexing (OFDM) systems, we propose a blind channel estimation scheme based on non-redundant precoding. In the proposed scheme, a modified covariance matrix is first obtained by dividing the covariance matrix of the received signal vector by the precoding matrix element-by-element. Then, the channel vector is estimated as an eigenvector corresponding to the largest eigenvalue of the modified covariance matrix. The eigenvector can be obtained by power method with low computational complexity instead of the complicated eigenvalue decomposition. We analytically derive a mean square error (MSE) of the proposed channel estimation scheme and show that the analysis result coincides well with the simulation result. Also, simulation results show that the proposed scheme has better MSE and bit error rate (BER) performance than conventional channel estimation schemes.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.95-97
• /
• 2000

배열 안테나에서 안테나 소자의 개수의 증가는 안테나의 이득을 증가시킬 수 있으므로 열악한 채널 환경에서도 채널이 필요로 하는 링크 마진을 얻을 수 있다. 그러나, 기존 빔 형성기에서 사용되는 배열 안테나 기법은 많은 계산량과 소모 메모리량 때문에 배열 소자의 개수에 제한이 따르게 된다. 이러한 문제를 해결하기 위하여 본 논문에서는 배열 안테나의 구조에 따른 위상차이를 보상하여 적은 계산량과 메모리를 갖는 배열 위상 차이 보상을 이용한 평행 구조 빔 형성기를 제안한다 배열 위상 차이를 보상하는 기법으로 적은 계산량과 메모리로 개수가 많은 긴 배열 안테나에서 얻을 수 있는 분해능과 안테나 이득을 얻을 수 있다. 제안된 기법의 성능을 비교하기 위해 기존의 빔 형성기법으로delay-sum 빔 형성기와 공분산 행렬의 고유치 해석을 통한 고유벡터 기법의 빔 스펙트럼과 연산량을 비교하였다. 제안된 기법으로 빔 형성을 하면, 배열 안테나의 소자의 개수가 늘어나도 기존의 방법보다 최소 30%의 연산량으로 스펙트럼 상 비슷한 성능을 얻을 수 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.85-88
• /
• 2001

Line spectrum pair(LSP) 계수는 양자화 오류에 강하고. 선형 릴간에 효율적이며, 필터의 안정성 판정이 용이하므로 LPC를 대신하여 음성 부호화에 널리 사용되고 있다. 일반적으로 LSP 계수간에는 일정한 상관관계가 나타나고, 이 특성을 이용하면 LSP 계수의 부호량을 줄일 수 있는 가능성이 있나. 본 논문에서는 LSP 계수를 압축하기 위해 principal component analysis(PCA)를 사용한 방법을 제안한다. 제안된 방법에서는 LSP 계수를 Karhunen-Loeve(KL) 변환해 에너지가 집중되는 고유치(eigenvalue)와 고유벡터(eigenvector)를 찾고 값을 양자화 한다. 성능 평가를 위해 2.4kbps MELP(mixed excitation linear prediction)와 8kbps QCELP(qualcumn code excited linear prediction) 음성 부호화기를 사용해 결과 값을 비교했고, 압축률이 증가하는 것을 확인했다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.72-77
• /
• 2011

In this study, the natural frequencies and mode shape of an external mounting pod were verified using the modal analysis and modal testing technique for a pod mounted on an aircraft. The procedure associated with the FEM building of an external mounted pod to predict the dynamic behavior of aircraft structures is described. The simplified FEM reflecting the results of the modal testing of a pod is built through the optimization, applied to the structural dynamic model of an Aircraft, used to verified the stability of vibration and flutter of an aircraft.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.152-163
• /
• 1999

The problem of eigenvalue and eigenvector for v-notched cracks in pseudo-isotropic and anisotropic dissimilar materials was obtained to discuss stress singularities from traction free boundary and perfect bonded interface conditions assuming like the form of complex stress function for v-notched cracks in an isotropic material. Eigenvalues were solved by a commercial numerical program, MATHEMATICA. The relation between wedged angle and material property for eigenvalue, ${\lambda}$ indicating stress singularities of v-notched cracks in pseudo-isotropic and anisotropic dissimilar materials was examined.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1009-1016
• /
• 2000

This paper describes the procedure of increasing the efficiency of experimental modal analysis and updating the quality of FE model using the scaled commercial vehicle frame. In this study, it was found that the experimental modal analysis could be more efficient when the measurements were made on the areas with high kinetic energies. Such areas could be located with the aid of FE modal analysis. Also, the number of measurement points could be decided by considering the dynamic characteristics of full FE model. The correlation of FE model and experimental modal analysis was assessed by the differences between the natural frequencies and MAC matrix, which is based on normal modes. These differences of modal parameters were reduced through the sensitivity and optimization analysis of which objective function consisted of the errors of natural frequencies and the diagonal terms of MAC matrix.