• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.48-48
• /
• 2009

최근 빠른 동작속도와 고 집적도를 얻기 위해 metal oxide semiconductor field effect transistor (MOSFET) 의 크기는 계속 해서 줄어들고 있다. 동시에 게이트의 절연층도 얇아지게 된다. 절연층으로 사용되는 $SiO_2$ 의 두께가 2nm 이하로 얇아 지게 되면 터널링에 의해 누설 전류가 발생하게 된다. 이 문제를 해결하기 위해 $SiO_2$ 를 대체할 고유전체 물질의 연구가 활발하다. 고유전체 물질 중에는 $ZrO_2,\;Al_2O_3,\;HfO_2$ 등이 많이 연구 되어 왔다. 하지만 유전상수 이외에 band gap energy, thermodynamic stability, recrystallization temperature 등의 특성이 좋지 않아 대체 물질로 문제점이 있다. 이를 보안하기 위해 산화물을 합금과 결합시키면 서로의 장점들이 합쳐져 기준들을 만족하는 물질을 만들 수 있고 $HfAlO_3$가 그 중 하나이다. Al를 첨가하는 이유는 문턱전압을 낮추기 위해서다. $HfAlO_3$는 유전상수 18.2, band gap energy 6.5 eV, recrystallization temperature 800 $^{\circ}C$이고 열역학적 특성이 안정적이다. 게이트 절연층은 전극과 기판사이에 적층구조를 이루고 있어 이방성인 드라이 에칭이 필요하고 공정 중 마스크물질과의 선택비가 높아야한다. 본 연구는 $HfAlO_3$박막을 $BCl_3/Ar,\;N_2/BCl_3/Ar$ 유도결합 플라즈마를 이용해 식각했다. 베이스 조건은 RF Power 500 W, DC-bias -100 V, 공정압력 15 mTorr, 기판온도 40 $^{\circ}C$ 이다. 가스비율, RF Power, DC-bias, 공정 압력에 의한 마스크물질과 의 선택비를 알아보았다.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.3
• /
• pp.97-104
• /
• 2012

In the design procedure of the cooling tower the form-finding of the shell is the most important process, because the shape of the shell determines the sensitivity of dynamic behaviour of the whole tower against wind excitation. In engineering practice, geometric parameters of the shell are generally determined based on natural frequency analysis. 32 cooling tower shell geometries were selected through variation of the geometric parameters of an existing cooling tower shell. They were evaluated based on the first natural frequency. From the result three representative cooling towers are selected for the analysis of the structural behaviour by means of linear FE-method. As a result, a hyperbolic rotational shell with the small radius overall will yield the shell geometry with a higher first natural frequency and thus a wind-insensitive structure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.47-53
• /
• 2011

The signal transmission properties of the connector such as insertion loss and return loss are investigated using analysis procedure of S-parameter simulation, equivalent model extraction, and characteristic impedance calculation. S-parameter simulation is performed by connector's modeling and solving based on 3-dimensional finite element method. The connector's equivalent model of ${\pi}$ type is are proposed and extracted with an optimization process of circuit analysis simulator. The characteristic impedance of the connector is calculated with results of circuit analysis simulation and S-parameter data. According to the connector's characteristic impedance, it's revised design is carried out. In this work, the connector's effective contact area is increased and its body is applied as a high dielectric material in order to increase its capacitance and then obtain impedance matching. Therefore, return loss of the connector is improved by approximately 10 dB due to its design revision.

• Computational Structural Engineering
• /
• v.3 no.2
• /
• pp.77-88
• /
• 1990

Two perforated plates (a square plate and a rectangular plate having an aspect ratio 1.57(L/sub x/=11, L/sub y/=7)) are taken as analysis examples. Each of these plates is given some changes in the boundary conditions. The size of cutouts as well as their locations are also changed in order to examine the variation of two eigenvalues corresponding to the fundamental mode. The relationship between two eigenvalues is established by changing the magnitude of edge thrust.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.463-465
• /
• 1999

인터넷으로 연결된 모든 장치는 각 나라마다 정해진 권위기관으로부터 고유한 IP 주소를 할당 받게 되는데, 현재 Internet Network Center(Inter NIC)라는 조직에서 이를 전체적으로 관장하고 있다. 최근 인터넷 사용이 급속히 확산되면서 인터넷을 이용하는 모든 장치에 고유 IP 주소를 할당하게 될 경우 고유 주소 체계의 사용 가능한 IP 주소 고갈이라는 문제에 직면하게 되었다. 그러나 이러한 문제는 내부 근거리 통신망(LAN)과 인터넷 상에 IP 주소를 변환시켜 주는 역할을 하는 네트워크 주소 변환(NAT: Network Address Translation) 기능을 이용하여 보완할 수 있다. 본 연구에서는 사설망 사용자의 인터넷 접속을 제공하는 것으로 기존 라우터에 NAT 기능을 적용하여 라우터가 보유한 공인 주소를 각 사용자가 공유하여 인터넷 접속을 제공하는 것으로 기존 라우터에 NAT 기능을 적용하여 라우터가 보유한 공인 주소를 각 사용자가 공유하여 인터넷 접속을 시도하는 것으로 사설망의 IP주소를 공인된 인터넷 주소로 변환시켜 외부로 전송하므로써 가능하다. 또한, 주소 변환 과정으로 사설망에서 사용하는 IP주소가 NAT 기능으로 IP주소가 변경되어 외부 침입자가 사설망의 존재를 알 수 없어 침입을 막는 간접적인 방화벽 기능도 수행한다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.23-26
• /
• 2009

한국인 최초 전체 유전체 서열(KOREF; Koreanindividualgenomesequence) 은 한국인을 위한 참조 서열로써 사용될 수 있다. 2009년 1월에 남성 한국인 유전체를 솔렉사(Solexa)를 통해 전장서열을 결정하였다. 이는 NCBI의 인간게놈프로젝트에서 생산한 게놈의 99.83%를 커버하며, 또한 NCBI게름서열의 약 20배를 커버할 정도의 유전체 서열을 결정하여 매우 높은 정확도를 가진 한국인 고유유전체이다. 한국인 유전체 서열의 분석결과 현재까지 밝혀지지 않았던 한국인 특이적인 3백만 개의 SNP를 밝혀냈다. 먼저 보고된 중국인 게놈은 한국인 게놈과 매우 가까운 민족 그룹임에도 불구하고 38%(3,186,352 SNP중에 1,217,362 SNP) 의 특이적인 차이를 나타내었으며, 또한 미토콘드리아 서열 비교를 통해서도 특이적인 다양성을 보여주는 SNP데이터를 확인 할 수 있었다. 차세대 게놈서열결정의 기술은 적은 노력과 비용으로 인간 유전체 데이터를 얻을 수 있게 되었으며, 이러한 개인유전체 데이터는 개인유전체 의학으로 가는 초석이 될 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1673-1677
• /
• 2008

This paper studies on the read rate of UHF-band RFID tag. An RFID tag antenna attached on the high permittivity surface will be detuned that results in deteriorating the read rate. In this study, we investigate that the electrical performance for the tag antenna is detuned due to the ceramic material and the read rate is radically improved after tuning the antenna.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.557-561
• /
• 1994

Q estimates are made by direct measurements of energy loss per cycle from primary P and S waves, as a function of frequency. Assuming that intrinsic Q is frequency independent and scattering Q is frequency dependent over the frequencies of interest, the relative contributions of each, to a total observed Q, may be estimated. Test examples are produced by computing viscoelastic synthetic seismograms using a pseudo spectral solution with inclusion of relaxation mechanisms (for intrinsic Q) and a fractal distribution of scatterers (for scattering Q). The composite theory implies that when the total Q for S-waves is smaller than that for P-waves (the usual situation), intrinsic Q is dominating; when it is larger, scattering Q is dominating. In the inverse problem, performed by a global least squares search, intrinsic $Q_p$ and $Q_s$ estimates are reliable and unique when their absolute values are sufficiently low that their effects are measurable in the data. Large $Q_p$ and $Q_s$ have no measurable effect and hence are not resolvable. Standard deviation of velocity $({\sigma})$ and scatterer size (A) are less unique as they exhibit a tradeoff as predicted by Blair's equation. For the P-waves, intrinsic and scattering contributions are of approximately the same importance, for S-waves, the intrinsic contributions dominate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.60-67
• /
• 2021

According to the 「Guidelines of Structural Design for Piloti Building」 of the Ministry of Land, Infrastructure and Transport (2018), the natural period of middle and low rise building of upper-walled lower frame type, such as the domestic multiplex house in piloti style, is suggested for safety to apply the existing code formula of the wall structure. However, the current code formula of the wall structure was provided based on actual measurement of high-rise wall-type structures that mainly exhibit bending behavior. So it is considered that it is not suitable for a piloti-type house with four stories or less, where the wall behaves in shear. See also Park et al. (2000) confirmed that the effect of the lower frame part is greater than that of the upper wall part in the natural period of complex structures with 10 or more floors through analytical studies. Therefore, in this study, in order to examine the effect of the lower frame on the natural period of the middle and low-rise piloti structure, the estimation of natural period by the finite element analysis, approximation formula and ccurrent code formula was performed for the target structures with the shear and flexural stiffness of the upper wall and the shear stiffness of the lower frame as variables. As result, it was found that the change in the shear stiffness of the lower frame had a greater effect on the natural period of the whole building than the change in the bending or shear stiffness of the upper wall.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.39-46
• /
• 2013

Cooperative spectrum sensing can improve sensing reliability, compared with single node spectrum sensing. In addition, Eigenvalue-based spectrum sensing has also drawn a great attention due to its performance improvement over the energy detection method in which the more smoothing factor, the better performance is achieved. However, the more smoothing factor in Eignevalue-based spectrum sensing requires the more sensing time. Furthermore, more reporting time in cooperative sensing will be required as the number of nodes increases. Subsequently, we in this paper propose an Eigenvalue and superposition-based spectrum sensing where the reporting time is utilized so as to increase the number of smoothing factors for autocorrelation calculation. Simulation result demonstrates that the proposed scheme has better detection probability in both local as well as global detection while requiring less sensing time as compared with conventional Eigenvalue-based detection scheme.