• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.453-454
• /
• 2024

본 연구는 경기 변동에 따라 대중들의 소비가 민감한 사업군을 도출해내고, 서울시 열린데이터 광장의 소비데이터를 분석하여 해당 기업의 경영 전략을 제시하는데 목적이 있다. 2023년 물가지수(CPI)는 8월 3.4%, 9월 3.7%, 10월 3.8%로 유례없는 상승 추이를 보이고 있다. 또한, KDI(한국개발연구원)는 2024년 소비는 고물가 기조로 인하여 상품소비의 부진이 지속되어 기업 매출이 전년(1.9%)과 유사하게 1.8% 증가하는데 그칠 전망이라고 예측하였다. 이렇게 대중들의 소비가 줄어들고 있는 경기 상황에서 기업이 손실을 막기 위해 취할 수 있는 대응 전략을 수립하는데 이 연구가 도움이 되리라고 사료된다.

• KDI Journal of Economic Policy
• /
• v.12 no.1
• /
• pp.69-91
• /
• 1990

A major change in tariff rates was made in January 1989 in Korea. The benchmark tariff rate, which applies to about two thirds of all commodity items, was lowered to 15 percent from 20 percent. In addition, the variation in tariff rates among different types of commodities was reduced. This paper examines the economic impact of the tariff reform using a multisectoral general equilibrium model of the Korean economy which was introduced by Lee and Chang(1988), and by Lee(1988). More specifically, this paper attempts to find the changes in imports, exports, domestic production, consumption, prices, and employment in 31 different sectors of the economy induced by the reform in tariff rates. The policy simulations are made according to three different methods. First, tariff changes in industries are calculated strictly according to the change in legal tariff rates, which tend to over-estimate the size of the tariff reduction given the tariff-drawback system and tariff exemption applied to various import items. Second, tariff changes in industries are obtained by dividing the estimated tariff revenues of each industry by the estimated imports for that industry, which are often called actual tariff rates. According to the first method, the import-weighted average tariff rate is lowered from 15.2% to 10.2%, while the second method changes the average tariff rate from 6.2% to 4.2%. In the third method, the tariff-drawback system is internalized in the model. This paper reports the results of the policy simulation according to all three methods, comparing them with one another. It is argued that the second method yields the most realistic estimate of the changes in macro-economic variables, while the third method is useful in delineating the differences in impact across industries. The findings, according to the second method, show that the tariff reform induces more imports in most sectors. Garments, leather products, and wood products are those industries in which imports increase by more than 5 percent. On the other hand, imports in agricultural, mining and service sectors are least affected. Domestic production increases in all sectors except the following: leather products, non-metalic products, chemicals, paper and paper products, and wood-product industries. The increase in production and employment is largest in export industries, followed by service industries. An impact on macroeconomic variables is also simulated. The tariff reform increases nominal GNP by 0.26 percent, lowers the consumer price index by 0.49 percent, increases employment by 0.24 percent, and worsens the trade balance by 480 million US dollars, through a rise in exports of 540 million US dollars and a rise in imports of 1.02 billion US dollars.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.45-54
• /
• 2018

This study aimed to investigate the effects of mechanical factors such as agitation speed and air rate in fly ash flotation. Specifically, we used thermal power plant fly ash with unburned carbon content of 3.4 to 3.7%. The effect of pH, agitation speed, collector dosage, and frother dosage - the key factors of froth flotation - showed unburned carbon recovery and unburned carbon content of 63% and 34%, respectively, when the dosage of safflower oil used as collector was 800 g/ton, pH was 7, agitation speed was 1,200 rpm, and frother dosage was 400 g/ton. The SEM/EDS analysis of fly ash in that case indicated that the spherical fly ash particles lowered the unburned carbon content as they floated with the air bubbles without being dissolved in the unburned carbon or settled in the ore solution. The other experiment of changing the mechanical factors such as agitation speed and air rate resulted in unburned carbon recovery and unburned carbon content of 74% and 67%, respectively, at air rate of 8 L/min and agitation speed of 900 rpm. The recovery and unburned carbon content increased as the low agitation speed and additional air injection decreased the strength of the eddy current in the ore solution and consequently prevented the floating of fine fly ash particles with unburned carbon. In addition, the recovery rate and unburned carbon increased further to 80% and 70%, respectively, showing the best performance when the agitation speed and air rate were lowered to 800 rpm and 6 L/min, respectively.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.69-75
• /
• 2024

Korea has entered the ranks of advanced countries in terms of economic size and technological competitiveness. However, its industrial accident fatality rate remains among the lowest in OECD countries, and recent incidents such as various building collapses have resulted in numerous deaths of workers or citizens, reminiscent of accidents in developing countries. According to the 2022 Industrial Accident Status Analysis by the Ministry of Employment and Labor, out of the 874 fatalities in work-related accidents in 2022 across all industries, 402 were in the construction industry, accounting for approximately 46% of all fatalities. In particular, the construction industry's fatality rate stands at 1.61, significantly higher than the overall industry fatality rate of 0.43, indicating its severity. Construction ranks highest in terms of fatality rates, with mining at 12.18 and fishing at 1.80. When categorizing construction projects into private and public, private projects show significantly higher figures in terms of contracts, contract amounts, accident numbers, and fatalities compared to public projects. However, unlike public agencies, many private clients lack adequate safety and health activities and lack established safety and health systems. This study aims to raise awareness among private clients about the need to establish safety and health systems and enhance safety and health activities, and to discuss the direction of future development of advanced safety and health practices among private clients.

• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.65-73
• /
• 1984

To assess the status of industrial injuries, a large scale textile company located around Taegu city was selected. And it was investigated from January 1981 to December 1982. After the department for workers safety was established, frequency rate of injury was 9.70 in 1981 and 4.15 in 1982, incidence rate per 1,000 workers was 27.11 in 1981 and 12.96 in 1982, and then, intensity rate was 0.33 in 1981 and 0.01 in 1982. The average duration of working loss was 36.64 days in 1981 and 3.34 in 1982. The incidence rate per 100 workers was 2.3 in annual average, 2.7 in men and 2.0 in women. The monthly incidence rate per 1,000 workers was highest as 3.6 in June; daily incidence rate, lowest as 1.8 on Sunday; and the highest as 14.7 from 10 to 12 o'clock in a day. The frequency by injured parts of body was highest as 42.3% on finger and 14.4% on the other part of hand, and the lower extremities as 14.4% followed. According to the kind of injuries, the laceration was the highest as 46.1%, the next was contusion as 15.4%, and the third was superficial injuries as 6.7%, According to the cause of injuries, the machinery accidents showed the highest as 47.1% and the accidents due to hand tool followed as 16.3%. By underlying cause of injuries, the environmental factors were 13.5% and the human factors 86.5%. The psychologic factors among human factors were the most common as 60.6%.

• Reproductive and Developmental Biology
• /
• v.39 no.1
• /
• pp.23-28
• /
• 2015

This study was carried out to investigate the reproductive and growing performances in sow farms located in Chungnam. Data collected from a total of 15 sow farms divided into 3 farm groups for 1 year were analyzed. The results obtained were as follows; The average of sow at small and large farms were 114.25 and 487.88 heads, respectively. And then, the difference among 3 groups in sow farm was not found significantly in farrowing rate. The significant difference among 3 farm groups was significantly found(p<0.05) in total litter size. The litter size born alive at sucking in small sow farm and middle farms were 9.93, and 10.48 pigs. The difference between small and large farms in number of pigs at weaning were significantly shown 8.89, and 9.35 pigs(p<0.05), respectively. The difference among 3 sow farms for ages at weaning showed significantly (p<0.05). The cycles of farrowing rate per year in small, large and middle farms were 2.17, 2.23 and 2.32, respectively. The significant difference among 3 sow groups was found in farrowing rate(p<0.05). The growing rate up to weaning for middle farms was significantly the higher level(94.70%) than that for other farms(p<0.05). The differences among 3 farm groups for marketing weight were not significantly shown.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.129-135
• /
• 1997

This study has investigated the effects of aging treatment on thc nlechanical propcrries of blg-iiAl-x%nix - 0.1.2) alloys fabricated by the squeeze castmg process. The microstructurcs of as-squeeze cast were composed of pro eurectic $\alpha$ magnesium solid solution, super saturated $\alpha$ solid solution and $\beta(Mg_{17}AI_{12}$) compund. Agcd at both $200^{\circ}C$ and $240^{\circ}C$, Mg--6AixZn alloys showed the peak hardness due to the formation of $\beta(Mg_{17}AI_{12}$) precipitates. The tiiscontinuous precipitates of the lamella r\.pe are predominant at $200^{\circ}C$ aging tredrment. tvhilc. the finely dispersed continu ous precipitates were major type at $240^{\circ}C$ treatment. Mg-- GAI-xZn a1loi.s fabricated hy the squeeze casting process had the hetter combination of tensile strength and elongation compared to the conventionally cast alloys. As increascci zinc: contents. the tensile strength was increased 11y the soiid solutirin strengthening effect of zinc,.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.2
• /
• pp.335-348
• /
• 2014

This study investigates the technical level and industrial structure for the case of the Gazelle industry in Chungnam Province. As a results of the empirical study, the Gazelle industry of Chungnam Province shows a competitive position in terms of scale and growth capacity, which. in turn, provides income and tax collection effects due to the high level of industrial efficiency. Among the Gazelle industry of Chungnam Province, low-level technology industry, compared to high and middle-level technology industries, accelerates higher level of agglomeration and industrial growth, which provides a rapid change of industrial structure of the province. Theses research results imply that research and development investment in the Gazelle industry is essential and industrial development strategy should be conducted via step-by-step with business scale quotient (BQ) and industrial growth rate (IG). Meanwhile, there should be a serious policy review whether low-level technology industry is better off for the province compared to high and middle-level technology industries. This study expects that regional industrial policy applying the concept of Gazelle industry can accelerate regional development since the Gazelle industry contributes to the high level of income growth and employment creation.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.506-514
• /
• 2013

This study examined the feasibility on the construction of a wood industrialization service center for a wood industry cluster establishment in Jeollanam-do. Construction of the wood industrialization service center is based on a discount rate of 3.5%, an investment period of 4 years, a business operations period of 16 years and an investment cost of 24600 million won; the total amount of the net present value, the cost-benefit ratio and the internal rate of return were assumed to be 2.579 million won, 2.51%, and 10.1%, respectively. In addition, the production inducement coefficient, the induced production effect, the income-induced coefficient, the income inducement effect, the employment inducement coefficient, and the employment inducement effect were estimated 1.4345, 35287 million won, 0.1655, 4000.7 million won, and 0.4665, 1,145 people, in the effects of the wood related industries using the multi-regional input-output model, respectively. Financial independence of operating income to cover its own costs incurred in accordance with the operating project might be practicable.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.5-44
• /
• 1996

Wornen's lahor market participation as well as the policy concern for wider utilization of married women, have continuously grown up. However, research efforts on the determinants of women's labor market participation, in the context of the relationship hetween life courses and active entry into lahor market, has been far behind the growing interest in this field. This study has conducted an event histoiry analysis of women's labor market transition utilizing personal occupational history data collected by the Korea Institute for Women's Development in 1991. The analysis is divided into tow parts: First part introduces logit regression to analyze the determinants of women's labor market participation and exit. The second part employs Cox regression to see the variation of transition rate between employment and non-employment. The result shows that there is a wide variation in women's labor market participation according to age, cohort, and family formation. Special note is needed for the significantly negative effect of marriage and child birth on labor market participation. The transition pattern of lower class women with less education fits well to the prediction of neo-classical economics; but the tendency of highly educated women's regression to non-employment reveals the strong influence of the unfavorable labor market structure, which can be better explained by the neo-structuralist perspective. There is a strong trade-off between productive and reproductive labor of women, which can only be corrected by strong policy implementation, such as extended child care facilities, abolition of discriminatory employment practices, and expansion of flexible part-time employment.