• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.19-25
• /
• 2009

New polyelectrolytes derived from ionene-containing photocurable reactive oligomer (PIDM) were prepared for water-resistant humidity-sensitive membranes. The mixture of PIDM, hexamethylene dimethacrylate (HDM), pentaerythritol triacrylate dimer (SP1013), and photoinitiator was simultaneously coated on the sensor electrode with photoinitiated radical polymerization. The pretreatment of the substrates with vinyl-type silane-coupling reagent was performed for improving the water durability and stability of the sensors at high temperature and humidity. When the resistance dependences on the relative humidity of the crosslinked PIDMs were measured, it was found that the resistance varied three orders of magnitude between 20 and 90%RH, which was required for the humidity sensor operating at ambient humidity. Their hysteresis, temperature dependence, response time, water durability, and high temperature/humidity stabilities were measured and evaluated as a humidity-sensing membrane.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.759-764
• /
• 2017

This research investigated the hygrothermal effect on the strength of bolt jointed section and moisture contents of composites exposed to hygrothermal environment for composite aircraft radome. The decrease in strength in the test environment is mainly attributed to the change in the material properties of the matrix due to temperature and moisture. The composite specimens were tested in three different environmental conditions: RTD(room temperature and dry), CTD(cold temperature and dry) and ETW(elevated temperature and wet). The failure mode of the bolt jointed composite specimens were studied using tests and finite element analysis. Finite element analysis reasonably predicted the failure load and mode of the joints. A reliability-based design was carried out for the bolt jointed composites of radome.

• Composites Research
• /
• v.31 no.3
• /
• pp.88-93
• /
• 2018

In this study, damaged composite laminates were repaired by a stepped patch repair method using halloysite nanotube(HNT) and milled carbon(MC) reinforced composite materials with different amount of the particles. And the mechanical and structural effects of the particles on the interface between the damaged and repair surfaces were analyzed. At this time, after exposing them to a harsh environment of high temperature and humidity for a long time, the recovery rate of the material properties relative to the material forming the damaged plate was compared. As a result, at $70^{\circ}C$ high temperature distilled water, the hygroscopicity of the HNT/GFRP composites was significantly different from that of the MC/GFRP composites. Especially, 0.5, 1 wt. % HNT was added, the moisture absorption rate was the lowest and this was the factor that contributed to the mechanical strength increase. On the other hand, MC showed a high hygroscopic resistance only with a small amount, and the strength was different according to the action direction of the load, and the addition amount was also different.

• Asian Journal of Turfgrass Science
• /
• v.15 no.3
• /
• pp.111-118
• /
• 2001

We observed air temperature and relative humidity in the green space why this research graspes effect of climate relax by coverage condition and height difference tree in green space of the 4ha scale. With this data, analyzed relationship of coverage and air temperature or relative humidity distribution, number of tree and climate relax by revolution analysis. In this result, higher zone formed barren area, lower zone did forest and surround grassland. Relative humidity have corresponding type of air temperature distribution. higher air temperature zone was lower humidity and lower zone was higher humidity. Coverage condition effect climate relax by increasing forest and grassland. and increasing number of tree effect climate relax no related hight of tree. This efficiency order of an arbor, subarbor.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.120-125
• /
• 2003

For this study grasp coverage condition and forest stratification to various green space, observed air temperature and relative humidity. With this data, coverage condition and air temperature, relative humidity distribution, analyzed relationship of forest rate and air temperature or relative humidity, tree numbers and green volume and humidity by revolution analysis. In this result, higher none is formed artificiality and barren area, lower zone did fores and water area. Relative humidity have corresponding type of air temperature distribution. lower Tone was higher humidity. Different of Idlest type or water area, surround of forest showed relatively higher humidity. Increasing tree numbers or green volume effect higher humidity and this efficiency order of an arbor, subarbor, shrub.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.414-414
• /
• 2012

차세대 플렉시블 디스플레이 소재로서, 탄소나노뷰브(CNT) 기반의 투명전도막은 기존의 ITO 박막보다 우수한 유연성을 갖기 때문에 많은 관심을 모으고 있다. 특히 낮은 저항과 투과도를 유지하면서 투명 전도막의 내구성을 향상시키는 연구는 상업화에 가장 필요한 연구 분야이다. 본 연구에서는 다층벽 탄소나노튜브(MWCNT)를 이용하여 제작된 투명 전도막의 내구성을 개선하기 위하여 오버 코팅을 통한 물성 개선을 연구하였다. 투명전도막은 PET기판 위에 스프레이 방식을 이용하여 균일하게 코팅하였다. 오버 코팅 물질로는 실리콘계 유무기하이브리드 투명하드 코팅을 적용하였다. 연구결과 오버 코팅층과 CNT 코팅층과의 젖음성이 물성 향상에 가장 많은 영향을 끼치는 것을 관찰하였고, 특히 젖음성이 증가할수록 투과도와 전기전도도가 향상되는 것을 확인하였다. 또한 고온 고습 환경에서 240시간 이상 내구성 테스트 결과, 저항률 변화가 1.1 이하인 것을 확인하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.241-247
• /
• 2009

It is important to satisfy the requirements and standards for the protections of passengers in a car accident. There are lots of studies on the crushing energy absorption of a structure members in automobiles. We have studied to investigate collapse characteristics and moisture absorption movements of CFRP(Carbon Fiber Reinforced Plastics) hat shaped sectional members when CFRP laminates are under the hygrothermal environment. In particular, the absorbed energy, mean collapse load and deformation mode were analyzed for side members which absorbed most of the collision energy. Variation of CFRP interlaminar numbers is important to increase the energy absorption capability. Therefore we have made a static collapse experiment to research into the difference of absorbed energy and deformation mode between moisture absorbed specimen and non-moisture absorbed.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.276-276
• /
• 1996

합성한 BR-8702-2의 시험결과 원소분석에서는 이론치와 실험치가 잘 일치하였고, 구조확인을 위한 FT-IR 및 FT-NMR(H$^1$)등의 시험에서도 구조와 일치하는 결과치를 나타내었다. 합성물질의 정량법을 HPLC 및 구성원소인 P와 N을 이용한 정량법에서도 유의성있는 결과를 얻을 수 있었다. 또한 분말상태인 이 물질의 안정성은 고온 고습하에서도 양호하였으며, 각종 완충수용액에서 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 pH7, 8, 9에서 안정하였고 pH8에서 k=1.3$\times$$10^{-4}$day으로 가장 안정하여 shelf life는 807일이었다. 광에 대해서도 k=5.8$\times$$10^{-4}$day로 매우 안정하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.345-348
• /
• 2006

FRP composites which are used in strengthening existing structure are usually adhered to the concrete surface, their performance are directly affected by environmental condition such as freezing-thawing and moisture. Accordingly, it is required to evaluate bond durability between FRP composite and concrete as well as FRP materials itself. The durability characteristics of FRP composite for freezing-thawing are evaluated in this study with the variables of concrete strength, type of FRP composite, freezing-thawing conditions and freezing-thawing cycle. In addition, material durability of GFRP sheet for high temperature/high humidity condition are examined in this experimental study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.886-889
• /
• 2004

격자전극을 가진 질화탄소막을 이용하여 새로운 습도센서를 개발하였다. 결정성 질화탄소막의 감습 특성을 조사하고, 광범위한 상대습도($10%\sim90%$)에 대해 민감한 임피던스와 커패시턴스 의존도를 보였다. 특히 격자전극은 습기의 자유로운 흡 탈착을 용이 하게 하여 센서의 히스테리시스를 줄였다. 또한, 질화탄소막은 물리, 화학적으로 안정한 물질이므로 고온, 고습 및 화학적으로 열악한 환경 속에서도 뛰어난 특성 을 나타내었다.