• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.163-164
• /
• 2016

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.413-419
• /
• 2013

The present study used the MILD combustor, which has coaxial cylindrical tube. The outside tube of the MILD combustor corresponds to the exhaust gas passage and the inner side tube is the furnace passage. A numerical analysis was accomplished to elucidate the characteristics of exhaust gas entrainment toward the inner furnace with the changes of venturi nozzle geometrical parameters, nozzle position, nozzle gap between high pressure air nozzle and venturi nozzle, and with the change of high pressure nozzle inlet velocity. The entrainment flow rate for the case with the high pressure air nozzle attached at the exhaust gas wall has relatively small change with the change of nozzle gap. That for the case with the high pressure air nozzle exposed to the exhaust gas has monotonically increase with the change of nozzle gap. The flow rate ratio of entrainment flow rate has considerably increase tendency with relatively lower air inlet velocity, on the other hand, that with relatively higher air inlet velocity could be seen relatively small increase.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.97-102
• /
• 2010

Curcuminoids are polyphenolic compounds and include curcumin and its derivatives possessing a yellow color. In the present study, changes in the chemical stability and antioxidant activities of curcuminoids, including curcumin, demethoxycurcumin (DMC), and bisdemethoxycurcumin (BMC), were investigated under various processing conditions. The yellowness of a mixture of the curcuminoids (79.4% curcumin, 16.8% DMC, and 3.8% BMC) at 405 nm was proportional to their amounts analyzed by HPLC. The curcuminoids became less stable with increases of pH and temperature during storage. Exposing a solution of the curcuminoids to autoclave conditions ($121^{\circ}C$, 1.2 atm for 15 min) decreased residual curcuminoid levels by 80-90%; however, as a powder under the same conditions the curcuminoids were much more stable with less than 10% loss. After autoclave treatment, scavenging activities of the curcuminoids for DPPH and ABTS radicals were reduced by 10.3 and 33.4%, respectively, whereas nitric oxide scavenging activity was slightly increased. The residual levels of curcumin, DMC, and BMC after autoclaving were 0.7, 1.4, and 0.9%, respectively, indicating that curcumin was the most sensitive to autoclave treatment. The results indicate that under processing conditions, pH and temperature markedly affect the stability of curcuminoids and major losses of curcuminoids occur after autoclaving. These conditions should be considered when processing foods containing curcuminoids.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.632-635
• /
• 2009

본 연구에서는 국내의 전압실태를 파악하고 산업체에 미치는 영향을 분석하기 위하여, 전압측정과 설문조사를 병행하였다. 먼저 전압측정을 위하여 수도권과 비수도권의 중규모 도시를 대상으로 측정지점과 대상선로를 선정하였다. 여기에서는 공장지역을 공급하는 4개의 배전용변전소의 주 변압기(M.Tr)와 5개의 고압선로(D/L)를 선정하여, 주 변압기의 직하전압(송출전압)과 말단의 수용가 단자전압을 5분간 평균치로 설정하여 측정하였다. 한편 설문조사 대전, 충남지역을 대상으로 산업체별로 전화와 설문지를 가지고 방문조사를 수행하여 분석하였다. 본 연구에서는 전압실태의 평가를 엄격하게 하기 위하여, 장거리의 고압선로이거나 부하변동이 심한 최악의 조건을 가지는 고압선로를 대상선로로 선정하였으며, 또한 선로전압조정장치(SVR)가 포함된 선로를 선정하여 고압선로 상에서의 전압조정에 대한 영향도 평가하도록 하였다.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.135-141
• /
• 1992

Effects of various artificial light sources on the growth of Chinese white cabbage, Chinese flat cabbage, lettuce, garland chrysanthemum, and green perilla were investigated. Plants were grown under different treatments for three weeks. Generally, the growth of artificial light treatment were better than natural daylight(ND). The greatest growth and external quality occurred in high-pressure sodium lamp(HPS). In incandescent lamp(IL), fresh weight was heavy, but marketable quality was poor because of succulent(or spindly) growth. Overall, vitamin C content were no difference among treatments. But relative chlorophyll content was somewhat high in HPS.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.5-8
• /
• 2010

The GCSC injectors studied in this paper are those applied to the combustion chamber of staged combustion engines. Liquid fuel is injected through tangential holes along the outer wall of the GCSC injector forming a swirling sheet and oxygen rich gas generated by a preburner enters axially through the center orifice of the injector to form a gaseous jet. The spray characteristics of GCSC injectors under ambient/high pressure conditions and the effect of recess on spray characteristics have been examined in this paper. These results are expected to be used as fundamental data to develop of a staged combustion engine.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.33-38
• /
• 2000

IGCC(Integrated Gasification Combined Cycle) BSU(Bench Scale Unit) 석탄 가스화공정은 정상상태 조업시 약 145$0^{\circ}C$, 25기압의 고온 및 고압의 조건하에서 운전되기 때문에 설정된 운전조건을 안정하게 유지하기 위해서 이러한 조건에 상응하는 안정된 제어로직의 구성은 매우 중요한 요소이다.(중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.11a
• /
• pp.13-21
• /
• 1993

석탄가스화 복합발전 플랜트의 부속공정인 중기터빈 시스템에 대한 공정 전산해석을 상용 공정해석 소프트웨어인 ASPEN 코드를 이용하여 수행하였다. 폐열회수보일러에서 생성되는 고압증기 조건을 2400psig로 채택하였으며, 폐열회수보일러의 열교환기 배열 및 생성증기의 조건에 따른 증기터빈 시스템의 성능변화를 고찰하였다. 페열회수보일러에서의 열교환기 배열, 생성중기 조건 및 공급수 예열 방법에 따라 증기터빈 시스템의 성능이 변화하게 되므로 이의 정확한 이해를 통하여 증기터빈 시스템의 최적화를 도모할 수 있다.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.3
• /
• pp.438-447
• /
• 2016

This study was conducted in order to investigate the physiochemical properties and antioxidative activity of red ginseng manufactured using the high temperature high pressure (HTHP) process, which is faster and simpler than the conventional process. According to increasing the steaming temperature, pressure and time, the content of minor non-polar ginsenosides, such as Rg3, Rk3, Rh4, Rk1 and Rg5 gradually increased. Also, the contents of acidic polysaccharide, total phenolic compounds and maltol gradually increased. Based on the results of the physiochemical properties and appearance quality, the optimum conditions of HTHP process were estimated as $140^{\circ}C$, $3kg/cm^2$ in 20 min. The total phenolic compounds and maltol contents of the HTHP process red ginseng (1.0% and 2.49 mg%, respectively) were higher than those of conventional red ginseng (0.23% and 0.60 mg%, respectively). In addition, the antioxidative activity was investigated using DPPH (2,2-diphenyl-1-picrylhydrazyl) and ABTS (2,2'-aziono-bis(3-ethylbenzthiazoline-6-sulfonic acid)) radical scavenging activity. DPPH and ABTS radical scavenging activities of HTHP process red ginseng increased by 3.4 and 3.6 folds, respectively, compared with conventional red ginseng. In addition, total phenolic compounds and maltol contents, as well as the antioxidant activity of the HTHP process red ginseng were similar to black ginseng. The present results suggest that the HTHP process is available for the development of value-added red ginseng products.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.150-155
• /
• 2010

Liquid rocket injectors play crucial roles on propulsive performance, combustion stability, and heat transfer characteristics. Nevertheless, their developments have mainly relied on empirical methods and expensive hot-firing tests due to lack of fundamental understanding of high pressure combustion phenomena in the near-injector regions. The present study was motivated by recent efforts to develop reliable modeling of liquid rocket combustion. The turbulent combustion model based on the flamelet concept has been extended to take into account real-fluid behaviors occurred at supercritical pressures, and validated against measurements for a cryogenic nitrogen injection, a non-premixed turbulent jet flame at atmospheric pressure, and a LOx/$GH_2$ coaxial shear injector at a supercritical pressure.