• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1B
• /
• pp.80-86
• /
• 2003

High speed networking applications like video-on-demand require the support of switches that can handle very high multicast loads. Switches studied in the past can support multicast loads of 25${\sim}$30% To overcome this limitation, Tandem Expanded Delta Network(TEDN) multicast switch was proposed to support more higher multicast load by 85${\sim}$90% without degradation in the performance But there is tremendous routing capacity that is not used in the series of routing network blocks. This paper presents modified TEDN multicast switches to save the excessive routing capacity. by recirculating packets in last routing network, we can achieve the acceptable packet loss ratio with the smaller number of routing network blocks. Extensive simulations show that our proposed switches have the acceptable packet loss ratio with reduced hardware cost.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.420-425
• /
• 2012

A forward error correction (FEC) coding techniques is one of time diversity techniques with which the effect of channel impairments due to noise and fading are spreaded over independently, and thus the performance could be improved. Therefore, the performance of the FEC scheme can be maximized if we minimize the correlation of channel information across over a codeword. In this paper, we propose a block turbo code with the maximized time diversity effect which may be reduced due to utilization of high order modulation schemes and due to transmission over a comparatively fast fading environment. Especially, we propose a very simple formula to calculate the address of coded bit allocation, and thus we do not need any additional outer interleavers, i.e., inter-codeword interleavers. The simulation resuts investigated in this paper reveal that the proposed scheme can provide the performance gain of more than a few decibels compared to the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.85-94
• /
• 2010

Many RFID systems use dynamic slotted ALOHA to identify the label information of the RFID tags. One of the key problems in the RFID system is how to estimate the number of RFID tags up to the desired level of accuracy. In this paper, we present the framework of tag estimation algorithm for the collision-oblivious (CO) reader which can only decide whether the tag response is successful or not. Thus, the CO reader must rely on the success estimator to predict the RFID tag population. We propose two estimation algorithms to predict the number of RFID tags, named the memoryless success estimator (MSE) and the intersection-based success estimator (ISE). The MSE considers only the estimate obtained at the current inventory round, while the ISE finds an appropriate intersection interval of the existing estimates collected at every inventory round. Through the simulation results, we demonstrate that the ISE is a fast, accurate, and controllable estimator whose performance is close to that of the collision/idle estimators.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.369-374
• /
• 2006

This paper related with the performance improvement of adaptive equalizer that is a based on the tricepstrum eqalization algorithm by using the received signal. Adaptive equalizer used for the improvement of communication performance, like as high speed, maintain of synchronization, BER, at the receive side in the environment of communication channel of the presence of the aditive noise, phase distortion and frequency selective fading, mainly. It's characteristics are nearly same as the inverse characterstics of the communication channel. In this paper, the TEA algorithm using the HOS and the 16-QAM which is 2-dimensional signaling method for being considered signal was used. For the precoding of 16-QAM singnal in the assignment of the signal costellation, Gray code was used, and the improvement of performance was gained by computer simulation in the residual intersymbol interence and mean squared error which is representive measurement of adaptive equalizer.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.262-270
• /
• 2013

In this paper, we propose a modified optical CBC(Cipher Block Chaining) encryption method using optical XOR logic operations. The proposed method is optically implemented by using dual encoding and a free-space interconnected optical logic gate technique in order to process XOR operations in parallel. Also, we suggest a CBC encryption/decryption optical module which can be fabricated with simple optical architecture. The proposed method makes it possible to encrypt and decrypt vast two-dimensional data very quickly due to the fast optical parallel processing property, and provides more security strength than the conventional electronic CBC algorithm because of the longer security key with the two-dimensional array. Computer simulations show that the proposed method is very effective in CBC encryption processing and can be applied to even ECB(Electronic Code Book) mode and CFB(Cipher Feedback Block) mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1395-1404
• /
• 2000

In this paper, we propose a heuristic wavelength routing algorithm for IP datagrams in WDM (Wavelength-Division Multiplexing) networks which operates in a distributed manner, while most previous works have focused centralized algorithms. We first present an efficient construction method for a loose virtual topology with a connectivity property, which reserves a few wavelength to cope with dynamic traffic demands properly. This connectivity property assures that data from any source node could reach any destination node by hopping one or multiple lightpaths. We then develop a high-speed distributed wavelength routing algorithm adaptive to dynamic traffic demands by using such a loose virtual topology and derive the general bounds on average utilization in the distributed wavelength routing algorithms. Finally, we show that the performance of the proposed algorithms is better than that of the FSP(Fixed Shortest-Path) wavelength routing algorithms through simulation using the NSFNET[1] and a dynamic hot-spot traffic model, and that the algorithms is a good candidate in distributed WDM networks in terms of the blocking performance, the control traffic overhead, and the computation complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.189-197
• /
• 2011

OFDM systems are much studied for the recent high speed wireless optical communication system. OFDM system has basically high PAPR and ICI easily generated because of non-linearity and RF impairments. In the wireless optical communication system, optical output power driven by current of LED is not linear so that transmission signals are distorted. Therefore, research about reception performance of this nonlinear optical output emitted by non-linear LED transfer function and OFDM signal has been conducted. Nonlinear effect of LED is different from nonlinear effect of OFDM system in the conventional radio communication system, which degrades the BER performance. In this paper, we apply non-linear transfer function of recently studied LED into OFDM system. So, for reducing the PAPR and suppressing the ICI in frequency domain of receiver, we suggest a new PAPR reduction technique to reduce non-linear distortion of LED and an adaptive ICI suppression algorithm so that BER performance may be improved. Also, the proposed method is verified through simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.769-775
• /
• 2009

This paper proposes the optimal transmission parameter selection method for an energy efficient Wireless Personal Area Network (WPAN) system which is applicable to the Maritime Telematics targeting for various ship models. Since the transmission parameter selection is an important factor for WPAN system to decide its energy efficiency, we propose an energy consumption model for ship area network (SAN) employing IEEE 802.15.3 based TDMA HR-WPAN model and analyzes the effect of transmission parameter selection on the performance of energy consumption. In particular, the main performance decision parameter of the SAN applying HR-WPAN is path loss, since it is very varied according to the material of shipbuilding such as steel (large ship), FRP (medium size ship) and compound wood (small ship). Thus, we analyzed and demonstrated that the proper transmission parameter selection among transmit power, PHY data rate and fragment size for each ship model guarantee the energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1058-1065
• /
• 2008

In the Internet, as computer resource is developed, multimedia data request being increase more and more. It is effective way that process both high capacity-data and real-time data. Overlay Multicast is an effective method for efficient utilization of system resources and network bandwidth without using hardware customization. Overlay Multicast is an effective method for multimedia data service to multi-users. Multicast tree reconstruction is required when a non-leaf host leaves or fails. In this paper, relay-frame interval is selected as revealed network-state with jitter. In our proposal, multi-user service control algorithm gives a delay effect in multimedia request time. The simulation results show that our proposal takes shorter period of time than the other algorithms to reconstruct a similar tree and that it is a more effective way to deal with a lot of nodes that have lost their multi-user nodes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.109-119
• /
• 1999

Switched Reluctance Motor(SRM) have been expanding gradually their awlications in the variable speed drives due to their relatively low cost, simple and robust structure, controllability and high efficiency. In this paper neural network theory is used to detemrine fuzzy-neural network controller's membership ftmctions and fuzzy rules. In addition neural network emulator is used to emulate forward dynamics of SRM and to get error signal at fuzzy-neural controller output layer. Error signal is backpropagated through neural network emulator. The backpropagated error of emulator offers the path which reforms the fuzzy-neural network controller's mmbership ftmctions and fuzzy rules. 32bit Digital Signal Processor(TMS320C31) was used to achieve the high speed control and to realize the fuzzy-neural control algorithm. Simulation and experimental results show that in the case of load variation the proposed control rrethcd was superior to a conventional rrethod in the respect of speed response.sponse.