• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.473-480
• /
• 2003

Iterative reconstruction methods have played a prominent role in emission computed tomography due to their remarkable advantages over the conventional filtered backprojection method. However, since iterative reconstructions typically are comprised of repeatedly projecting and backprojecting the data, the computational load required for reconstructing an image depends highly on the performance of the projector-backprojector pair used in the algorithm. In this work we compare quantitative performance of representative methods for implementing projector-backprojector pairs. To reduce the overall cost for the projection-backprojection operations for each method, we investigate how previously computed results can be reused so that the number of redundant calculations can be minimized. Our experimental results demonstrate that the ray tracing method not only outperforms other methods in computation time, but also provides improved reconstructions with good accuracy.

• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.244-252
• /
• 2008

This research differentiate the technique of Jungkwon-jirugi, one of the basic movements of Taekwondo, into two movements stop-jirugi and push-jirugi and gives analysis of the impulse, acceleration and velocity in the point of motor control. For this, we tried graphic analysis using an acceleration sensor and high speed camera which was made from USA in 2005 and took pictures at 250 frames per second. We reached the following conclusions. First, the acceleration wave of push-jirugi was a period longer than stop-jirugi, meaning that the push-jirugi motion asserts force for a longer time. Second, the acceleration and velocity graph shows that the highest velocity occurs on the point when the acceleration begins to decrease right after reaching its maximum. Third, according to the image analysis using the high speed camera, we could find out that the shoulder is pushed a little even in the stop-jirugi motion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.131-136
• /
• 2017

High speed under water vehicle by using solid rocket motor, which is a natural cavitation type, was tested. The vehicle's speed and running distance was measured, and pressure sensors installed on the surface of the vehicle show pressure-time history of pressures according to the development of the supercavitation. Underwater cameras installed on the wall of the test pool recorded whole processes from the onset of the supercavitation to fully developed one. CNU-SuperCT based on 2-dimensional inviscid theoretical analysis was used to simulate the test result. In consideration of CNU-SuperCT does not include the control fins of the vehicle, simulation results agree with test results very well. Also, pictures from underwater cameras support the test results.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.65-65
• /
• 2009

철강 재료의 GMA 용접 시, 보호가스로 $CO_2$ 가스를 사용하면 가격이 저렴하고 용입이 깊다는 장점이 있어 국내에서 광범위하게 사용되어 왔다. 그러나 일반적으로 활성가스인 $CO_2$를 사용한 GMA용접은 아크가 불안정하고 스패터가 많이 발생한다는 단점이 있어 아크 안정성 개선의 필요성이 부각되었다. 거기다 용접 자동화 및 용접 품질의 고급화 추세로 아크 안정성이 $CO_2$용접에서 점점 중요해지면서, 아크 안정화 및 스패터 저감을 위한 연구가 활발히 진행되어 왔다. 본 연구에서는 GMA 용접 재료인 solid wire의 표면에 이온화 에너지가 낮은 금속인 인듐(In)을 전해 도금하여 중전류의 $CO_2$ 용접에 적용하였다. 고속 촬영과 아크 모니터링 분석을 통하여 금속 이행 모드 및 아크 안정화에 미치는 영향에 관하여 연구하였다. 동일 전압, 전류 조건에서 도금 두께를 달리하여 용접을 실시, 도금 두께에 따른 아크 안정성의 경향을 분석하였다. 그 결과 도금 두께가 두꺼워짐에 따라 아크가 넓어지는 것을 확인하였으며, 이는 아크 내에 이온화도가 높은 인듐 이온이 다량 포함됨으로써 이온의 양이 증가하기 때문인 것으로 생각된다. 또한 도금 두께가 일정 이상이 되면, 이행 모드가 용적의 아래에서 아크가 발생하는 반발 이행 모드에서 용적의 윗부분에서 아크가 발생하는 입상 용적 이행 모드로 바뀌었으며, 이때 단락 수가 현저히 줄어들어 아크가 안정해졌다. 이에 따라 인듐 도금 와이어는 기존보다 낮은 전류 영역에서도 안정적인 아크와 금속 이행 모드를 가지게 됨을 확인하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.12-17
• /
• 2018

A natural cavitation-type high-speed underwater vehicle with solid rocket motor is tested, and its speed and running distance are measured. The outputs from pressure sensors on the surface of the vehicle reveal a pressure-time history reflecting the development of supercavitation. Underwater cameras installed on the wall of the test pool record the entire process from the onset of supercavitation to its full development. CNU-SuperCT, based on two-dimensional inviscid theoretical analysis, is used to simulate test results. Considering CNU-SuperCT does not include the control fins of the vehicle, simulation results agree with test results very well. Additionally, pictures from underwater cameras support the test results.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.35-45
• /
• 2018

Motion Estimation(ME) has been developed to reduce the redundant data in digital video signal. ME is an important part of video encoding system, However, it requires huge computational complexity of the encoder part, and fast motion search methods have been proposed to reduce huge complexity. Multi- view video is obtained by capturing on a three-dimensional scene with many cameras at different positions and its complexity increases in proportion to the number of cameras. In this paper, we proposed an efficient motion method which chooses a search pattern adaptively by using the temporal-spatial correlation of the block and the characteristics of the block. Experiment results show that the computational complexity reduction of the proposed method over TZ search method and FS method can be up to 70~75% and 99% respectively while keeping similar image quality and bit rates.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.289-296
• /
• 2019

Recently, the development of smartphone camera technology enables to shoot high quality video. In order to utilize these techniques in various ways, it is necessary to be able to transmit signals to an external device such as a external display. The transmission performance of the video signal is determined by the loss of the transmission line and the length of the wiring. In this paper, we propose the HDMI transmission line design criterion according to the wiring length changed according to the smartphone design and the surface roughness amplitude of the printed circuit board conductor wiring material. Also, we verified the proposed design criteria for the actual smartphone design. The proposed design criterion can be applied to various application fields including high-speed signal transmission line besides mobile application.

• Composites Research
• /
• v.35 no.3
• /
• pp.196-200
• /
• 2022

Split Hopkinson Pressure Bar (SHPB) is a general test equipment for measuring the mechanical properties of high modulus metal and composite materials at high strain rate. However, for the soft plastic material, it is difficult to hold the specimen and achieve dynamic stress equilibrium due to the weak transmitted signals. In this study, SHPB test apparatus were designed to measure accurately the high strain rate stress-strain curve of the soft plastic materials by changing the incident bar materials and the shape of the specimen holder parts. In addition, to verify the high strain-rate tensile strain data obtained from SHPB, the strain distribution of the specimen was measured and analyzed with a high-speed camera and the digital image correlation (DIC), which was compared with the strain history measured from SHPB.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.11
• /
• pp.7-17
• /
• 2022

This study investigates the effect of cylindrical baffle arrays behind a rigid barrier on debris flow behavior and dynamic impact load. Small-scale tests were performed with various transverse blockage ratios and row numbers of baffles. High-speed cameras were installed at the flume's top and side, and load cells were installed in front of the rigid barrier. Moreover, glass beads simulated large boulders with debris flow in the flume. Test results revealed that the impact load of debris flow on the rigid barrier was significantly reduced using the cylindrical baffles behind the rigid barrier. In addition, the increased transverse blockage ratio of baffle arrays led to a greater impact load of debris flow because of flow suppression due to the baffle arrays.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.17-32
• /
• 2002

The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500 fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.