• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.597-603
• /
• 2009

In this study, Based on the optimization developed in Um et al. (2009), optimum design method of the alignment when building new lines and renewing existing ones is presented. The object function used for optimization is passenger comfort ($P_{CT}$) which was proposed in BSI (2006). Other aspects of track/vehicle interaction will be treated in boundary conditions. And track/vehicle interaction analysis is peformed using KTX-II model. From the analysis results, it was found that the optimum alignments are affected by the angle (I) between adjacent straight lines and $R-L_t$ combinations. Also the dynamic analysis confirms well the results from the simplified analysis. However, In the most cases, the $P_{CT}$ values in the dynamic analysis are higher than the simplified $P_{CT}$ values. If both methods are used when optimizing the alignment, it will be possible to design the alignments more rapidly and reliably.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.116-130
• /
• 2023

Expressways play pivotal roles in cargo transportation because of their superior accessibility and mobility compared to rail and air. On the other hand, there is a limit to the accurate calculation of cargo transportation performance using existing highways owing to the mixture of vehicle types and difficulty in identifying cargo loads of individual cargo vehicles. This paper presents an algorithm for calculating more reliable cargo transportation performance using big data. The traffic performance (veh·km/day) was derived using the data collected from Toll Collecting System. The average tolerance weight for each vehicle type and the cargo load unit (ton/unit) considering it was calculated using vehicle specification information data and high-speed and low-speed axis data. This study calculated the cargo transportation performance by section and type using various online integrated highway data and presented a method for calculating the transportation performance by linking open business offices and private highways.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.20-20
• /
• 2012

최근, 수송기기 분야는 국제 환경규제 강화에 따른 CO2 절감, 연비향상, 경량화를 위한 기술적 수요가 증대되고 있으며, 그린카, 그린선박 등 친환경 수송기기에 대한 연구가 활발히 진행되고 있다. 하지만, 기존의 금속소재가 가지는 경량화의 한계를 극복하기 위해서는 CFRP, GFRP 등 금속대체 복합소재를 적용한 수송용 경량부품 개발에 대한 필요성이 요구되고 있다. 복합소재는 섬유사이에서 응력을 전달하는 기지(Matrix)와 하중을 전달하는 섬유(Fiber)의 종류와 양 및 적층 각도에 따라 수송용 부품에 적합한 기계적 특성을 얻을 수 있고, 높은 비강도와 비강성의 값을 갖게 되어 경량화가 용이한 장점이 있다. 반면, 섬유재의 종류, 성형방법, 경화온도 등에 따라 물리적 특성에 큰 변화가 발생하며, 수지의 경화조건에 따라 성형시간이 많이 소요되는 단점을 가지고 있다. 따라서, 본 연구에서는 자동차, 선박, 항공기, 철도차량 등 각종 수송기기의 경량화를 목적으로 생산성 향상 및 성형시간 절감을 위해 열가소성 수지, 저온속경화 수지를 적용하여, 경화 시간을 단축시키고, 3D-fabric 및 다층구조 직물을 Vacuum Infusion 공법으로 성형하여, 기존의 섬유재 적층시 소요되는 작업 공정을 간소화 할 수 있도록, 고속성형 복합소재를 적용한 수송용 경량부품 개발에 관한 연구를 수행하였다.

• Explosives and Blasting
• /
• v.11 no.4
• /
• pp.38-44
• /
• 1993

"The Japan Sea Rim Natios" Is not one that was formed under a specific idea, as in the case of the European Community, in the respect of politics, economy and culture. At present, in particular after the Cold War, Japan has extended exchange on regional and private levels with the countries located on the other side of the apan Sea from the first stages of friendship to economic relationships. In the future, it is necessary to promote the establishment of an International exchange network and traffic system for each of the traffic facilities in order to build up the Block that will mainly contribute to the economies of countries and regions In the area. For the purpose, it is fundamental to reexamine the national land planning and the local development planning of each of the countries. From the standpoint of technology, the issues to be looked into are : study and development on marine civil engineering such as structures over straits study and development on the construction engineering of express ways and exprees rail roads : development of vehicles such as cars and trains I propose approaches to my vision of these traffic systems from my standpoint as an engineer in this paper.his paper.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1992.12a
• /
• pp.143-150
• /
• 1992

“The Japan Sea Rim Nations” is not one that was formed under a specific idea, as in the case of the European Community, in the respect of politics, economy and culture. At present, in particular after the Cold War, Japan has extended exchange on regional and private levels with the countries located on the other side of the Japan Sea from the first stages of friendship to economic relationships. In the future, it is necessary to promote the establishment of an international exchange network and traffic system for each of the traffic facilities in order to build up the Block that will mainly contribute to the economies of countries and regions in the area. For that purpose, it Is fundamental to reexamine the national land planning and the local development planning of each of the countries. From the standpoint of technology, the issues to be looked into are : study and development on marine civil engineering such as structures over straits : study and development on the construction engineering of express ways and express rail roads : development of vehiclessuch as cars and trains ; I propose approaches to my vision of these traffic systems from my standpoint as an engineer in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.352-362
• /
• 2016

Today, it appears that the rapid advances in technology have allowed broadening both the system technology and the business opportunities in the rail industry. Owing to the developments in technology and the industry, and also due to the hearth, the latest high-speed trains and a variety of unattended operations in rail systems are being developed and are operational. In particular, this study covers the existing railway rolling stock and signaling systems that operate in an environment more complex than the concept of localized management, so the introduction of a new signaling system is needed. In addition, developments based on the existing signal system concepts for passenger railways need to minimize human injury. In this study, to participate in the development of new systems in a variety of domains and to provide an integrated common vision methodology as an engineer on the basis of efficient signal system design and safety would like to present the methodology for action. Therefore, each different linkage through the next new domain zone system design: design through to secure the integrity of safety than can secure methodology.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.91-100
• /
• 2007

This study suggests direct connection service which has advantage of high-speed operation of KTX and access convenience of general train, and Pre-feasibility studies on the direct connection service. And analyze transportation demand change by the method as follows; It is to analyze the demand change of before and after KTX operation by previous transport data of Gyeongbu line, and calculate the coefficient of utilization using triggering demand by opening the 2nd phase of Gyeongbu line (Dongdaegu${\sim}$Busan). Through Pre-feasibility analysis, reduction $70{\sim}100$ minutes of train travel time and total revenue will increase about $100 thousand per day. Also, there will be environment-friendly effects of decreasing $CO_2$ emissions. But, Direct connection service need to highly cost ; Buying and Operation cost of KTX train. Therefore, we will be get more correct result of Pre-feasibility study on direct connection service, if there are concrete on buying the KTX action plans.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.345-353
• /
• 2020

On conventional railway lines, trains with different speeds are operated. Therefore, trains moving on curved sections with cants must accept various ranges of balanced cants, cant deficiency, and cant excess, which is essential for the comfort and safety of train operation. In this study, the correlation between the curve radius, cant, and train speed on a track was analyzed to check the cant range that satisfies the criteria of train types, operation speed, cant deficiency, and cant excess. Also, the range of setting the cant by the curve radius and balanced cant were calculated by a regression analysis of train speed according to the frequency of operation in the case of mixed trains. The results could make it possible to improve the speed of the operation route, reduce the loss of ride quality, reduce the risk of derailing caused by cant deficiency, and minimize the load deflection by excess cant. This will ensure the safety of trains running on curves and improve the efficiency of track maintenance.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.43-48
• /
• 2004

The development of the traffic system has brought relative reduction in aspect of the cost and time distance on the geographical space. SOC(social overhead capital), an express highway and railroad, has a great and absolute effect on the prosperity of community, As Mokpo is one of the community under the influence q West costal highway express and KTX(Korea Train Express), the number of the tourists visiting city of port like Mokpo has increasing gradually, especially at the high-demand season(in Summer). But the coastal passenger boot can't be capable of customers arriving at the port. As a result of this situation, the 'balking' occurs. No 'balking', means the jam of road. In this thesis, by understanding the concept and property of ARENA and simulating operation of coastal passenger boot at Mokpo port, intends to analyze the truth of 'balking' and finds an effective operation method of coastal passenger boot for the solution to the traffic jam. The solution to the jam in the vicinity of port of Mokpo, which try to develop tourism package commodity now, will present the effect of qualitative analysis in giving an opportunity of economic growth of the community, Mokpo.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.1-7
• /
• 2016

Although the second driving device of KTX, which consists of the wheel and the axle reduction gears unit, is a mechanically integrated structure, its preventive maintenance (PM) requires two separate intervals due to the different technical requirements. In particular, these subsystems perform attaching and detaching work simultaneously according to the maintenance directive. Therefore, to reduce the unnecessary amount of PM and high logistic availability of the train, it is important to optimize PM with regard to reliability-centered maintenance toward a cost-effective solution. In this study, fault tree analysis and reliability of the subsystems, considering the criticality of the components, were performed using the data derived from field data in maintenance. The cost optimization of the PM was derived from a genetic algorithm considering the target reliability and improvement factor. The cost optimization was derived from a maximum of the fitness function of the individual in generation. The optimal TBO of them using the genetic algorithm was 2.85x106 km, which is reduced to approximately 21% compared to the conventional method.