• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.145-150
• /
• 2008

The objective of this research is to design the roller rig for the maintenances of high-speed train bogies operated on the tracks. Roller rigs have been studied and researched to develop the faster, safer and more efficient railway system. It is to reduce the time of testing vehicles and to make as wide a range of tests available as possible. Therefore, it is very important issue to check and evaluate the dynamic responses of high-speed train after several years of operation. This paper presents a study on the conceptual design and dynamic model to develop the roller rig for the routine maintenances of high-speed trains bogies with maximum speed of 350km/h. ANSYS was used to analyze the wheel/roller's contact behavior of driving axle and ADAMS was used to verify and analyze the dynamic behaviors of roller rig.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.104-108
• /
• 2012

All of the Korean high speed train windows have been imported from abroad up to now. In this paper, the air pressure endurance test device for high speed train windows was studied and developed. This test device can create air pressure variation similar to train running real condition and carry out pressure endurance test according to international standard. Henceforward, this test device will be useful for domestic production of high speed train windows.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1288-1289
• /
• 2015

본 논문은 고속 주행하는 소형의 수중 운동체의 롤 제어기에 대한 연구를 정리한 결과이다. 모형 PMM 시험의 롤 관련 유체력 계수 값의 오차가 커서 실해역 시험에서 시뮬레이션 결과와는 다른 진동현상이 발생하였으나, 시험 결과를 이용한 튜닝과정을 통하여 안정적인 롤 제어 성능을 획득할 수 있었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.587-594
• /
• 2022

This paper analyzed radio link throughput performance by applying radio link simulation and test equipment because there is limit in train filed test in 420 km/h high speed environment. According to the radio performance analysis, the throughput performance is slightly degraded in QPSK and 16QAM modulation schemes. But throughput performance is highly degraded in 64QAM modulation scheme.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.309-316
• /
• 2015

The contribution of exterior devices such as bogie fairings and pantographs to running resistance was estimated on the basis of coasting tests at up to 350 km/h with the help of the Korean Next Generation High speed train (HEMU-430X). In order to assess the reduction of air resistance by nose car's bogie fairing, coasting tests were conducted with a removable bogie fairing at various speed ranges. And, the contribution of the pantograph to air resistance was also estimated with coasting tests that include the pantograph's rising and descent modes. The linear regression method was used to examine decelerations from time-velocity data and the equation of resistance to motion is proposed from the deceleration data. From the aerodynamic term of the equation of resistance to motion, the contribution to air resistance by nose car's bogie fairing and pantograph was estimated. The results show that the air resistance was reduced by about 3.8% by the nose car's bogie fairing. And, the 3.9% increase of air resistance by the pantograph (open knee mode) has been found.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.271-279
• /
• 2016

Pantograph aerodynamic noise is a major cause of noise that occurs when a train is traveling at high speeds. In this study, in order to analyze the contribution of pantograph aerodynamic noise, real train tests using HEMU-430X were carried out. In order to analyze the frequency characteristic of the noise of the pantograph in an actual vehicle, a sound field visualization has been carried out using a 144-channel microphone array at train speeds of 350 and 400km/h. As a result, it was confirmed that the low frequency noise in the 250~400Hz bandwidth provides the main contribution to the pantograph noise. And, in order to estimate the noise contribution of the pantograph, the noise level difference between cases in which the pantograph is ascending and those in which it is descending were compared in single microphone experiments. The frequency analysis in the single microphone tests showed that the bands of 315~400Hz and 1000~1250Hz are the main frequency characteristics of pantograph noise. These results show quite good agreement with those of previous studies and with results of sound field visualization.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.303-308
• /
• 1997

전기자동차의 구동장치는 모터, 인버터, 감속기 및 차동기어 등으로 구성되는데 모터는 주로 유도전동기와 영구자석형 동기전동기, 브러쉬리스 전동기 등이 사용되고 있다. 본 연구에서는 이 중에서 가격과 내구성 면에서 이점이 있는 유도전동기를 적용한 전기자동차의 전력시스템의 특성분석과 가속 성능에 대해 다루었다. 축전지, 유도전동기, 인버터로 구성된 전력시스템을 각각 모델링하고, 가속성능 개선을 위해 고속에서의 초대토크 알고리즘과 고전적 방법인 속도에 반비례하도록 자속을 제어하는 방식에 대해 각각 적용하여 차량의 가속성능을 예측, 분석하고 이를 현차시험을 통해 시험결과와 비교 제시하고자 한다. 본 연구에서는 주행 중에 축전지 전압 변동에 따라 유도 전종기의 고속 운전 영역 즉, 약계자 영역에서 전기자동차의 가속 특성이 어떻게 나타나는지를 고찰 하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1643-1645
• /
• 2004

변압기는 판토그래프를 이용하여 가선으로부터 전력을 공급받아 전력변환장치, 견인전동기 등의 각종 장치에 필요한 전원을 공급해주는 중요한 역할을 한다. 또한 전장품에서 가장 무겁고 부피가 큰 변압기는 차량의 주행 속도에 큰 영향을 미치고 변압기를 설치할 수 있는 공간상의 제약이 따르므로 소형, 경량화가 매우 필수적이다. 본 논문에서는 변압기의 오일온도와 외함온도의 변화를 확인하기 위해 차량에 취부된 변압기에 온도 센서를 부착하였다. 또한 한국형 고속전철이 운행하는 동안 변압기의 온도가 기준 온도를 넘어갈 경우 차량의 치명적인 고장을 일으킬 수 있으므로 차량 내에 상시 계측시스템을 설치하여 변압기의 온도를 실시간으로 감시하고 측정하였다. 이를 통해서 변압기의 온도 변화와 열적 특성을 분석할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.45-50
• /
• 1995

본 연구에서는 기존에 널리 사용되고 있는 스카이훅 제어 알고리즘(skyhook control algorithm)[3]을 바탕으로 확장 개발된 모드 스카이훅 제어(mode skyhook control) 개념 및 주파수 감응식 제어(frequency dependent control)개념[4][5]을 실용화하기 위하여 응답속도가 20msec이하의 비교적 빠른 응답 속도를 갖는 전자기식 작동기 (electro-magnetic actuator)에 의해 가변되는 4단 반능동형 가변 댐퍼 시스템을 개발한 후, 다음과 같은 성능의 향상을 시험결과를 통하여 보이고자 한다. -저속에서의 승차감 향상과 고속에서의 주행 안정성 향상 -커브 주행 또는 급격한 핸들 작동시의 롤안정성 (rolling stability) 향상 -제동 및 급발진시의 차체 피칭 운동 방지 (anti-dive, anti-squat)

• 연구논문집
• /
• s.28
• /
• pp.21-37
• /
• 1998

Atmospheric pressure in a tunnel rises in proportion to the square of train’s speed as it enters a tunnel. This pressure difference propagates into the train and cause aural discomfort to the passengers. In order to alleviate the aural discomfort of them. a new ventilation system has been designed and tested. This system controls the charged and discharged by flow rate by detecting the air pressure generated outside and inside of the train. Test to confirm the fundamental performance of the system was carried out. Consequently, this system was found to be able to alleviate the aural discomfort effectively. Application of the system to TGV-K running in the speed range of 350km/h is considered to have good propospect.