• Journal of the Korea Concrete Institute
• /
• v.28 no.4
• /
• pp.455-462
• /
• 2016

This experimental study aims to evaluate the impact performance of UHPC exterior panels through high velocity impact tests. The impact performance of UHPC was compared with that of granite in terms of panel thickness, and strain histories were recoded on the rear face of panel specimens. The UHPC turned out to be a good exterior facade material, because the appearance of UHPC is natural enough and impact performance was superior to granite. After colliding, compression pulse reached to the rear face but that pulse was reflected in tension pulse with respect to the free point outside the rear face of the panel. This tension pulse caused the scabbing from the rear side, as the strain histories on the rear face showed three different regions as compression region, steady region and tension region. The shear plug deformation by shear force also was one of the primary reasons for the scabbing based on the observation. Therefore, the scabbing seemed to be affected by both tension and shear forces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1551-1562
• /
• 1991

최근까지 발표된 유한 요소법을 이용한 압연 해석 관련 주요 논문들을 정리해 보면 다음과 같다. Li와 Kobayashil는 강소성 유한 요소법(rigidplastic finite element method)을 여러가지 마찰조건에 대하여 해석하였다. 이때 압연롤은 강체 (rigid body)로 시편은 가공경화(workhardening)를 동반한 강소성체로 모델링하였다. Hwang과 Kobayashi는 강소성 유한 요소법을 이용한 평면 변형 압연에서 재료 손실을 최소화하는 예비 성형체(preform)의 설계에 대한 연구를 수행하였다. 이 경우에도 역시 압연롤은 강체로 시편은 가공 경화를 동반한 강소성체와 완전 소성체로 모델링 되었으나, 고착(sticking) 마찰 조건에 대해서만 해석을 수행하였다. Mori와 Osak- ada 그리고 Oda는 약간 압축성이 있는 재료의 평면 변형 압연에 대하여 연구하였다. 이때 압연롤은 강체로 시편은 가공 경화를 동반한 강소성체로 모델링 되었으며 경계 면에서는 Coulomb 마찰을 고려하였다. 이밖에도 오일러(Eulerian) 수식화를 이용한 Dawson과 Thompson, Berman의 해석 결과가 있으며, 또 폭 방향의 변형까지를 고려한 Li와 Kobayashi, Mori와 Osakada의 3차원 해석 결과가 있다.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1998.12a
• /
• pp.471-481
• /
• 1998

피승수를 승수로 곱하는 곱셈연산은 승수에 대한 많은 부분곱을 더하기 때문에 본질적으로 느린 연산이다. 특히, 큰 수를 사용하는 암호 프로세서에서는 매우 빠른 곱셈기가 요구된다. 현재까지 느린 연산의 개선책으로 radix 4, radix 8, 또는 radix 16의 변형 부스 알고리즘을 사용하여 부분곱의 수를 줄이려는 연구와 더불어 Wallace tree나 병렬 카운터를 사용하여 부분곱의 합을 빠르게 연산하는 방법이 연구되어 왔다. 본 논문에서는 암호 프로세서용 64$\times$64 비트 곱셈기를 구현하는데 있어서, 고속의 곱셈을 위하여 고속의 병렬 카운터를 제안하였으며, radix 4의 변형 부스 알고리즘을 이용하여 부분합을 만들고 부분합의 덧셈은 제안한 카운터를 사용하였다. 64$\times$64 비트 곱셈기를 구현함에 있어서 본 논문에서 제안된 카운터를 이용하는 것이 속도 면에서 Wallace scheme또는 Dadda scheme을 적용하여 구현하는 것 보다 31% 정도, Mehta의 카운터를 적용하여 구현하는 것 보다 21% 정도 개선되었다.

• Explosives and Blasting
• /
• v.35 no.3
• /
• pp.15-20
• /
• 2017

In order to obtain the dynamic response behavior of the rock subjected to blasting loading, a shock-proof high sensitivity impact sensor which can measure high frequency dynamic force and strain events should be adopted. Because the impact sensors which uses quartz and piezoelectric element are costly, generally the strain measurement-based impact (SMI) sensors are applied to high speed loading devices. In this study, dynamic Brazilian tension tests of granitic rocks was conducted using the Nonex Rock Cracker (NRC) reaction driven-high speed loading device which adopts SMI sensors. The dynamic response of the granite specimens were monitored and the intermediate strain rate dependency of Brazilian tensile strengths was discussed.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.68-73
• /
• 2009

As various haptic algorithms and haptic equipments have developed, the computer simulation includes the haptic simulation. Basically, the haptic simulation requires very fast refresh rate approximately 1000 Hz. The traditional haptic simulations have satisfied that requirement by simplifying the target model. In soft body simulation, simplifying the deformation is not good because the visual feedback is important. Separating haptic model from deformable model can be solution of that problem. However, the user may feel a subtle distiction because the relationship between two models are not clear. In this paper, we propose the hybrid model to manipulate haptic rendering and deformation and define the relationship between two models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2254-2260
• /
• 2010

This papers describes modification of the integer transform used in H.264/AVC in order to efficiently apply to lossless compression. The previous reversible integer transform is not efficient for lossless compression due to large dynamic range of the transform coefficients. To reduce the problem, efficient and reversible integer transforms are proposed. The modified transforms are designed based on the lifting scheme for fast transforms. This paper introduces signal flow graphs for the proposed fast transforms and provides corresponding experimental results. The results indicate that the proposed modified reversible integer transform are superior to the previous transform in terms of lossless compression efficiency.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.147-154
• /
• 2000

The influence of the mined-out caves on the stability of the high speed railway tunnel was investigated with a series of geological logging and in-situ tests on the one hand, and with the rock mass classification using the multiple regression analysis on the other hand. The rock mass in this area can be classified as 'fair', and the condition of the discontinuities plays the most important role in the classification of the rock mass. The results of the analysis obtained by the FLAC showed that the western part of the tunnel locating at 50m above the mine cavities could be affected by subsidence associated with a considerable deformation, the magnitude of which might depend on the properties of the rock mass. Key word : multi regression analysis, subsidence, mine cavities

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.333-340
• /
• 2011

The purpose of this paper is to develop two kinds of finite element models for the heavy deformable obstacle defined in grade crossing collision scenario of the Europe TSI and the Korean rolling stock safety regulations and to apply the crashworthiness evaluation for the Korean high-speed EMU with the FE model. The numerical models of the heavy obstacle were changed from a past rigid one to a current deformable one whose stiffness requirement should be verified by a collision simulation defined in the regulations. Through several trial simulations, two types of numerical models for the heavy obstacle were developed, which satisfied physical properties specifies in the regulations. One is a solid-type obstacle with uniform density and the other is a shell-type. With the obstacles developed in this study, the grade crossing collision scenario for Korean high-speed EMU was simulated and evaluated for the two-type obstacle models. From the simulation results, the shell and solid-type obstacles showed quite different behaviors after collision, and the shell type model gave more severe results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.151-151
• /
• 2004

현재 세계 기술은 고집적화, 소형화, 고속화, 정밀화 된 시스템을 추구하고 있으며 기계적인 요소와 전기적인 요소를 통합한 장비의 개발에 초점을 맞추고 있다. 그 예로 일렉트로닉스, 옵토일렉드로닉스, 옵틱스, MEMS 등을 들 수 있다. 이러한 장비들은 초정밀 위치 결정을 위해 미크론 단위 또는 나노 단위의 분해능을 가진 구동기가 필요하다. 이러한 구동기에 많이 사용되는 대표적인 재료에는 자기변형 재료와 압전 재료가 있다. 압전 재료는 현재 구동기에서 가장 많이 사용되는 재료이지만 피로현상, 드리프트 및 출력 힘이 작은 문제점을 가지고 있다.(중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.25-30
• /
• 1980

자동차용 추진축의 위험회전속도를 원심력에 의한 탄성변형의 관계로부터 유도하여 보았다. 회전체의 unbalance량은 보통 회전속도에 관계없이 거의 일정하나 자동차용 추진축과 같이 외 경에 비하여 전장이 길고 고속회전하는 경우에는 축의 탄성변형에 의하여 unbalance량이 커진다. 회전속도에 따른 unbalance 변화량을 역시 원심력-탄성변형관계로부터 구하고 balancing을 위한 최적회전속도, tube의 편심도 기타 balancing 작업을 어렵게 하는 요소들에 대하여 정리하여 보았다.