• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.57-68
• /
• 1993

Air Wiping technique is widely used because of easy and efficient coating control in present CGL. Coaring weight is decided by nozzle header pressure, strip line speed and distance between strip and nozzle. Coating defects are results from unbalance of these factors and coating equipment calibration inaccuracy. Therefore, this study is mainly dealing with the cause of coating defects such as edge overcoating and coating deviation. The coptimum working condition is suggested by formulated coating model using collected working data. We developed two demension analysis program for air flow in nozzle and calculated dynamic pressure and air velocity with this program. The productivity and coating guality are improved by applying the result of this reserach.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.20-28
• /
• 2000

Air wiping technique is widely used because of easy and efficient coating control in present CGL The coating weight is controlled by nozzle header pressure. strip line speed, and the distance between strip and nozzle. Coating defects are resulted from the unbalance of these control factors and the inaccuracy of coating equipments. We investigates the main cause of coating defects, such as edge overcoating and coating deviation through various experiments. It is found that the edge overcoating is mainly come from nozzle lip type, and the coating deviation is caused by the unbalance of dynamic pressure.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.53-54
• /
• 2003

현대 산업사회가 다양해짐에 따라 발생되는 생활폐기물의 형태도 다양화되었고 발생폐기물의 성상은 연소가 어려운 난분해성 폐기물로 발열량이 높아지고 있다. 이러한 폐기물의 처리를 위한 소각설비는 폐기물 처리형태에 따라 대형의 도시 쓰레기 소각장이나 지자체의 중형급 소각장, 발생원 단위의 소형 소각장으로 구분하여 처리하고있다. 기존 중ㆍ대형 소각로의 유해가스 처리시설은 일반적으로 냉각설비와 가스상 처리설비, 입자상 처리설비 등으로 구성되는데 반해, 소형 소각로는 싸이클론 방식만으로 구성되어 입자상 물질만을 처리하였으나, 최근에 들어서 관련법규가 개정되어 소형 소각로에서도 입자상 오염물질뿐만 아니라 HCl 및 SOx 등과 같은 산성가스류와 다이옥신 등의 배출농도를 규제함에 따라 가스상 오염물질도 처리하는 방안을 도입하고 있는 추세이다. (중략)

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.594-600
• /
• 1989

항공기용 원동기는 항공기를 추진시키기 위한 동력장치이다. 항공기가 추진력을 얻기 위해서는 프로펠러를 회전시켜 대량의 공기를 뒤로 가속시켜 그 반작용을 이용하는 방법과, 단순히 배기 가스를 뒤로 고속분사시켜 그 반작용을 이용하는 방법이 있다. 피스톤 엔진은 전자를, 터보 제트 엔진은 후자를 대표하고 있는데 두 가지 방법을 절충하여 터빈으로 프로펠러를 회전시키는 터보 프롭엔진과, 헬리콥터의 로우터를 회전시키는 터보 샤프트 엔진도 있다. 또 터보 제트 엔진과 터보 프롭 엔진의 증간성능을 꾀한 터보 팬 엔진이 있는데 효율이 아주 좋기 때문에 급속히 발 전되어 항공기용 원동기의 대명사격으로 현재 군용이나 민간기용으로 널리 사용되고 있다. 최 근에는 터보팬 엔진과 터보 프롭 엔진을 절충한 새로운 터보 프롭 APT (advanced turbo prop) 엔진의 실용화가 추진되고 있다. 이상과 같은 종류의 엔진 이외에도 항공기용 원동기에는 극히 제한된 용도에 쓰이는 램 제트와 펄스 제트 엔진 그리고 로켓 엔진 등이 있다. 원동기는 그 용 도에 따라 개발, 활용되는 것이기 때문에 오랜 역사를 지닌 피스톤 엔진은 아직까지도 경항공 기용 원동기의 주류를 이루고 있고, 앞으로도 터보 프롭 엔진과 더불어 나름대로 계속 활용될 것으로 전망된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.905-911
• /
• 2017

Effects of injector position and momentum flux ratio on a vertical jet in a cross flow field were studied qualitatively and shown by using air and water. The experiment was carried out by fixing the momentum flux ratio and varying the position of the injector hole. Conversely, the injector hole position was fixed and the momentum flux ratio was varied. Image visualization was performed by a Shadowgraph technique using a high speed camera. The visualized images were compared for finding differences in spraying through Density Gradient Magnitude Image. It is observed that as the x/d of the apparatus increased the jet break up height decreases and the spray angle also decreases. When x/d is 0, the spray reaches the floor and ceiling at any momentum flux ratio.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.88-96
• /
• 2018

Effects of injector position and momentum flux ratio on a vertical jet in a cross-flow field are qualitatively studied and displayed using air and water. The position of the injector hole and the momentum flux ratio is changed and image visualization is performed using a shadowgraph technique and a high-speed camera. The visualized images are compared to find differences in spraying using density gradient magnitude image. It is observed that, as the x/d of the apparatus increases, the jet break-up height decreases. When x/d is 0, the spray reaches the bottom and ceiling at any momentum flux ratio.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.42-52
• /
• 1997

The basic principle of underwater ram-jet as a unique marine propulsion concept showing vary high cruise speed range(e. g. 80-100 knots) is the thrust production by the transfer of the potential energy of compressed gas to the operating liquid through kinetic mixing process. This paper is aimed to investigate the propulsive efficiency of the nozzle flow in underwater ram-jet at the speed of 80 knots for the buried type vessel. The basic assumption of the theoretical analysis is that mixture of water and air can be treated as incompressible gas. For an optimized nozzle configuration obtained from the performance analysis, preliminary data for performance evaluation are obtained and effects of nozzle inner wall friction, ambient temperature, ambient pressure, water density, gas velocity, bubble radius, flow velocity, diffuser area ratio, mass flow ratio and water velocity gradient are investigated.