• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.345-352
• /
• 2021

The Republic of Korea Army (ROK Army) is trying to improve the effectiveness of education and training. On the other hand, there are many restrictions in actual training, limiting their practical education and training. Virtual reality technology is being used to overcome these limitations. Virtual reality technology is developing in various types, and the ROK Army needs to introduce a virtual reality training system for cost-effective education. The ROK Army mainly uses high-cost simulator-types that are similar to real equipment. Recently, a low-cost immersive-type virtual reality training system wearing an HMD is also being used. This study analyzed the cost education effectiveness of simulator-type and immersive-type virtual reality training systems in operation at the ROK Army air defense school. First, the research method used AHP to analyze the educational effects. Second, the cost was applied to the production cost of the virtual reality training system to analyze the cost-effectiveness of the education. The immersion-type was 3.4 times higher than the simulator-type in terms of cost effectiveness. These results can be used as basic data for analyzing the cost-effectiveness of a virtual reality training system.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.21-44
• /
• 1988

As a way for the effective utilization of pallman chips and sawdusts, these furnish materials were combined with non-woody material of plastic (polypropylene) screen in board manufacturing to improve their weak physical and mechanical properties. The conventional boards were made with conditions of specific gravity 0.40, 0.55, 0.70, and 0.85, resin content 8, 10, 12 and 14%, and number of polypropylene screen 1, 2, 3 and 4, and press-lam boards were also manufactured. The physical and mechanical properties were measured and discussed on thickness swelling, bending modulus of rupture and elasticity, tensile strength, internal bond strength, and screw holding strength. The results obtained at this study were summarized as follows: 1. In thinckness swelling both of pallman chip board and sawdust board were improved by the increase of resin content, and press-lam boards showed lower thickness swelling than conventional boards. 2. Both the modulus of rupture and elasticity were increased with the increase of specific gravity, and press-lam boards showed higher modulus of rupture and elasticity than conventional boards. On the other hand, modulus of rupture was increased with the increase of number of polypropylene screen and resin content whereas these effects in modulus of elasticity was not recognized. 3. Tensile strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen showed higher tensile strength than control boards. Also tensile strength was increased with the increase of number of polypropylene screen, and press-lam boards revealed higher tensile strength than conventional boards. 4. Internal bond strength was increased with the increase of specific gravity, and the boards combined with polypropylene screen were lower in internal bond strength than control boards. Also, the boards combined with odd number of polypropylene screen showed lower internal bond strength than those combined with even number of polypropylene screen. 5. Screw holding strength was increased with the increase of resin content and specific gravity but significant difference was not approved between boards combined with polypropylene screen and control boards. In press-lam boards, pallman chip boards of higher specific gravity but sawdust boards of lower specific gravity showed better screw holding strength than control boards.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.413-423
• /
• 2020

Over the wide area, King Sejong Station and the nearby land are uncovered with snow and ice conditions. Therefore, the active layer on the permafrost has been formed to be much thicker than the other Antarctica region. Electrical resistivity survey of Wenner and dipole-dipole arrays was undertaken at a series of time in the freezing season at the King Sejong Station to delineate subsurface structure and to monitor active layer in permafrost terrain. Time-lapse resistivity structures are well in terms of the vegetation distribution, ground surface temperature, and snow depth. Horizontal high resistivity belt(>1826 Ωm) at very shallow depth is thickening with the lapse of time, probably caused by the freezing of the water in the pore spaces with decrease of ground temperature. Subsurface structures for the area of low snow-cover and vegetated zone area are comprised of 0~0.5 m deep high-resistive gravel-rich soil, 0.5~3 m deep low-resistive active layer, and the underlying permafrost. In contrast, the unvegetated area and high snow-buildup is characterized with high resistivities larger than approximately 2000 Ωm due to freezing of the soil throughout the year. Data interpretation and correlation schemes explored in this paper can be applied to confirm the active layer, which is expected to get thinner in additional survey during the thawing season.

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.224-230
• /
• 2015

This study was conducted to investigate the effects of several variables on the durability of wood pellets fabricated with torrefied larch (LAR) and tulip tree (TUT) chips. Microscopic observation by scanning electron microscope-energy dispersive X-ray spectrometer was also performed to identify the surface of the wood pellets visually. In addition, torrefied-LAR and TUT pellets were fabricated with the addition of moisture, lignin, starch and protein as binders, and durabilities of the pellets were analyzed statistically. Durabilities of torrefied-LAR and TUT pellets were lower than one of non-torrefied-LAR and TUT pellets. Durabilities of both pellets fabricated with the wood chips, which were torrefied with $230^{\circ}C$ and 30 min, were the highest among all torrefaction conditions used in this study. From the microscopic observations, lignin was distributed broadly on the surface of non-torrefied wood pellets, whereas congregated partially on the surface of torrefied wood pellets. Durability of LAR pellets increased with the addition of moisture, but that of TUT pellets was reduced. Addition of binders contributed to increase the durability of LAR and TUT pellets. As a binder, lignin and protein were more effective than starch for improving the durability. In conclusion, mild torrefaction treatment, such as $230^{\circ}C$ and 30 min, might be an optimal condition to minimize the durability reduction of the LAR and TUT pellets. In addition, when torrefied woody materials with high and low specific gravities are used as a raw material for the production of durable wood pellets, it might be required to adjust moisture content and torrefaction conditions of woody materials, respectively.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.492-506
• /
• 2019

Heavy metal contaminants in the shooting range are mostly present in a warhead circle or a metal fragment present as a particle, these fine metal particles are weathered for a long period of time is very likely that the surface is present as an oxide or carbon oxide. In particular, lead which is a representative contaminant in the shooting range soil, is present as more fine particles because it increases the softness and is stretched well. Therefore, by physical washing experiment, we conducted a degree analysis, concentration of heavy metals by cubic diameter, composition analysis of metallic substances, and assessment of applicability of gravity, magnetism and floating selection. The experimental results FESEM analysis and the measurement results lead to the micro-balance was confirmed thatthe weight goes outless than the soil ofthe same size in a thinly sliced and side-shaped structure according to the dull characteristics it was confirmed that the high specific gravity applicability. In addition, the remediation efficiency evaluation results using a hydrocyclone applied to this showed a cumulative remediation efficiency of 71%,twice 80%, 3 times 91%. On the other hand, magnetic sifting showed a low efficiency of 17%,floating selection -35mesh (0.5mm)target soil showed a relatively high efficiency to 39% -10mesh (2mm) efficiency was only 16%. The target treatment diameter of soil washing should be 2mm to 0.075mm, which is applied to the actual equipment by adding an additional input classification, which would require management as additional installation costs and processes are constructed. As a result, it is found that the soilremediation of shooting range can be separately according to the size of the warhead. The size is larger than the gravel diameter to most 5.56mm, so it is possible to select a specific gravity using a high gravity. However, the contaminants present in the metal fragments were found to be processed by separating using a hydrocyclone of the soil washing according to the weight is less than the soil of the same particle size in a thinly fragmented structure.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1038-1044
• /
• 1996

The salt-fermented anchovy sauce (AS) was packed in round No. 307-1 can, and thermally processed at $121.1^{\circ}C$ to obtain Fo values of 3, 5 and 10. The changes of food components and qualifies by thermal processing of sterilized AS (RAS) were examined. The compositions of AS were as followed; pH 6.81, VBN 394.7 mg/100g, total nitrogen 2,195.5 mg%, amino-nitrogen 1,010.5 mg%, and acidity 10.5 ml. Viable cell counts of AS on 0%, 5%, 20% NaCl-medium were $2.9{\times}10^3,\;9.1{\times}10^3$ and not detected, respectively. And viable cell counts of RAS were not detected. Acidity, total nitrogen and amino nitrogen contents of AS decreased slightly with the severeness of heat treatments, whereas pH and VBN content were increased. Total free amino acid contents of raw AS and RAS were 12,802.5 mg% and $11,212.6{\sim}12,105.4\;mg%$, and major amino acids were alanine, glutamic acid, leucine, isoleucine, valine and lysine. Also contents of IMP, hypoxanthine, TMAO and TMA in AS and RAS were 42.1 mg% and $35.5{\sim}40.9\;mg%$, 103.7 mg% and $103.1{\sim}105.5\;mg%$, 78.8 mg% and $58.2{\sim}71.6\;mg%$, 55.8 mg% and $58.9{\sim}68.5\;mg%$ respectively. And a little changes were observed in whole volatile components of AS with severeness of heat treatments by GC chromatogram patterns. Judging from the chemical and sensory evaluations, the Fo 3 heat treatment sample was not inferior to raw AS, and maintained good quality for 1 year storage.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.101-110
• /
• 2014

The ministry of Land, Infrastructure and Transport announced that they launched the pilot project to offer Happy House built with modular construction as part of the major projects of incumbent government in 2013. The market size of modular construction is getting increasingly enlarged together with strong will of government. The major challenges that current modular construction encounters can be summed up as lack of standardization of material on the stage of design and fabrication. The portion of material costs in modular construction marks 16 to 17% higher than the existing other construction method, and account for 60 % of total construction cost, which is why material management is the most important factor. However, the imperfect standardization and specification on design causes high loss of materials on fabrication, which makes the construction wastes and total construction cost increasing in accordance with the increase of material costs. This study has been conducted to verify major modules by developing optimization algorithm on gypsum board material among wall finishing materials. It is expected that this paper contributes not only to eco-friendly construction by minimizing the waste factors of materials through these efforts, but also to removing high cost issues which had been recognized as a setback of current modular construction.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.15-23
• /
• 2012

Indirect Test Method is often used instead of direct test method in test method for extinguishing performance of $CO_2$ extinguishing facility because of high cost, environment problems and difficulties of procedure. But in the danger facilities for a unit of nation, such as a petrochemical plant, a nuclear power plant, or etc. is better to verify the performance of the extinguishment through direct discharge test. In $CO_2$ extinguishing system for total flooding system installed in dangerous facilities in Korea, each protected area in surface fire and deep-seated fire had selected and verified of extinguishing performance of $CO_2$ extinguishing facilities. To get recognized as extinguishing performance, discharged $CO_2$ concentration to protected area should be equivalence with design concentration standards (NFSC and NFPA). The Design Concentration means that $CO_2$ extinguishing agent is considerate of concentration for percentage of allowance (20 %) from extinguishing concentration which available to control of flame. As test result, surface fire and deep seated fire in protected area is obtained $CO_2$ design concentration and maintained design concentration more than 20 minutes as deep-seated fire. Through this study, we introduced direct discharging test method and decision method. And furthermore, especially in the dangerous facilities as a unit of Nation, we suggested necessity about reliability of extinguishing facilities to use direct test method.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.691-700
• /
• 2003

Due to the fast development of wire&wireless internet and computer hardware, more and more internet services are being developed, such as Internet broadcast, VoD (Video On Demand), etc. So QoS (Qualify of Service) is essentially needed to guarantee the quality of these services. Traditional Internet is Best-Effort service in which all packets are transported in FIFO (First In First Out) style. However, FIFO is not suitable to guarantee the quality of some services, so more research in QoS router and QoS protocol are needed. Researched QoS router and protocol are high cost and inefficient because the existing infra is not used. To solve this problem, a new QoS control method, named Network Adaptive QoS, is introduced and applied to client/server-based streaming systems. Based on network bandwidth monitoring mechanism, network adaptive QoS control method can be used in wire&wireless networks to support QoS in real-time streaming system. In order to reduce application cost, the existing streaming service is used in NAQoS. A new module is integrated into the existing server and client. So the router and network line are not changed. By simulation in heavy traffic network conditions, we proved that stream cannot be seamless without network adaptive QoS method.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2017

The objective of this study is to find the failure factors of venture companies. We analyze 210 troubled venture companies, all of which have been under guarantee from the Korea Technology Finance Corporation over the last three years. Methods of analysis for failure factors are as follows. First, we categorize the failure factors into the four different types based on growth and profitability indicators in the financial statements of targeted venture companies. Then we analyzed the failure factors of the subject companies based on the troubled guarantee reports made by the Korea Technology Finance Corporation. If a venture company under its guarantee program falls into insolvency, the Korea Technology Finance Corporation make the troubled guarantee report to find out the failure factors and evaluate the recovery potentials. We identify 374 failure factors of venture companies through the analysis. The most prominent among them are deteriorating of business environments (79 factors) and decreasing or withdrawing orders from major suppliers (54 factors) due to bankruptcies or change in business plans. They are followed by slowing collection of accounts receivable (31 factors), dropping or frozen product price (24 factors) due to intensifying competition and escalating pressures from major suppliers, rising raw material costs both at home and abroad (21 factors). In addition, the nuclear power plant disaster in Japan, shut-down of the Kaesong Industrial Complex and subsequent lawsuits, delay in technology development projects, high cost-low efficiency management structure, etc., are also revealed as new factors causing trouble for venture companies.