• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.634-643
• /
• 2002

Ultrathin film of polyamic acid having benzene and sulfonyloxyimide moieties was prepared using the Langmuir-Blodgett (LB) technique, and then photosensitive polyimide LB film was obtained by the thermal treatment of precursor polyamic acid multilayers at 200$\^{C}$ for 1 hr. The polyamic acid was synthesized by condensation polymerization under THF and pyridine cosolvent. All monomers and polymers were identified through elemental analysis, FT-IR and $^1$H-NMR spectroscopic measurements. The microarray patterning of photosensitive polyimide LB film on a gold substrate was generated with a deep UV lithography technique. The well-characterized monolayer of cytochrome c was immobilized on the microarray patterns using two different self-assembly processes. Physical and electrochemical properties of the self-assembled cytochrome c monolayer were investigated based on cyclic voltammetry and atomic force microscopy (AFM). Also, its application in bioelectronic device was examined.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.90-97
• /
• 2001

Dispersions are prepared from poly(ethylene-co-acrylic acid) (PEAA) ionomer with two different counter-ions, ammonium and sodium. The diffusional characteristic of urea aqueous solution are measured for the films prepared from the above mentioned dispersions. It is attempted to find the relationship between diffusional behavior and various chemical and physical characteristics of films. DSC is employed to characterize glass transition temperature and degree of crystallinity and the structural features of crystal phase and ionic clusters are examined by WAXD and FTIR. The diffusional characteristics of ionomer is found to be dependent on various parameters such as the size of initial dispersion as well as the kind of counter ion and the degree of neutralization.

• Polymer Science and Technology
• /
• v.16 no.1
• /
• pp.48-56
• /
• 2005

• Polymer Science and Technology
• /
• v.23 no.3
• /
• pp.296-306
• /
• 2012

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.344-350
• /
• 2012

New pressure sensitive adhesives (PSAs) for polarizer film were prepared by electron beam (e-beam) radiation to acrylic copolymers, and their adhesive properties were investigated. The acrylic copolymers were synthesized by free radical polymerization of $n$-butylacrylate (BA), 2-hydroxyethyl methacrylate (HEMA), and acrylic acid (AA). The acrylic copolymers were coated on PET release films to a thickness of 25 ${\mu}m$, laminated to polarizer films, and then radiated with e-beam at room temperature. Gel fractions of all the acrylic copolymers after e-beam radiation at 50 kGy were higher than 93%, and their crosslinking densities were increased with increasing the content of HEMA units. PSA prepared by e-beam radiation of acrylic copolymer synthesized with a feed ratio of BA/HEMA/AA = 89.5/10/0.5 (w/w/w) at a dose of 50 kGy exhibited the best adhesion performances in terms of peel strength, creep resistance, durability and reliability, and light leakage. It is expected that the preparation method of PSAs via e-beam irradiation will improve the producibility and workability of polarizer film for liquid crystal display.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.284-289
• /
• 2008

Polymer is a critical component of local drug delivery to prevent restenosis. This study tested whether poly(n-butylmethacrylate)(PBMA) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)(PHA) was candidates for this purpose. In vitro release of paclitaxel from PBMA and PHA loaded with 10% paclitaxel exhibited a triphasic release profile, with a fast initial and intermediate second phase followed by a slow release phase. Perivascular delivery of paclitaxel using these films inhibited neointimal hyperplasia in balloon-injured rat carotid arteries. The paclitaxel-loaded PBMA or PHA groups showed significant neointimal formation reductions versus the control groups (PBMA vs control: $0.03{\pm}0.02$ vs $0.10{\pm}0.01\;mm^2$, p<0.05; PHA vs control: $0.04{\pm}0.03$ vs $0.09{\pm}0.01\;mm^2$, p<0.05). This study suggests that PBMA and PHA could be good candidate polymers of local drug delivery to prevent restenosis. Perivascular delivery using these films represents a possible approach for prevention of restenosis. These can be candidate polymers for drug eluting stents.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.329-337
• /
• 1979

The water-vapour transmission ratios (WVTR) of the various commercial polymer films have been investigated at the constant pressure and relative humidity (RH). Water proofnesses, the reciprocals of WVTR for the various samples, were determined using a cup device and maintaining the sample films at a constant temperature ($40{\pm}1^{\circ}C$) and a constant R. H ($90{\pm}2%$) for 24 hours. The following order of the relative proofness was observed; oriented polypropyrene (O.PP) > high density polyethylene (HDPE, Inflation) > high density polyethylene (HDPE. T-die) > casted polypropylene (C. PP) > nonoriented polyester (N. PET) > low density polyethylene (LDPE) > oriented polyester (O. PET) > rigid polyvinyl chloride (Rigid PVC) > semirigid polyvinyl chloride (Semirigid PVC) > nonrigid polyvinyl chloride (Nonrigid PVC) > oriented nylon (O. Nylon) > nonoriented nylon (N. Nylon). And water proofness order was also observed to decrease with the temperature rising; HDPE (T-die) > C. PP > O. PET > LDPE > O. Nylon. The activation energies of LDPE, HDPE (T-die), C. PP, O. PET and O.Nylon films were 12.0, 11.1, 11.4, 11.7, 14.1 kcal/mole, respectively. The WVTR's of the films were increased with the polarity of polymer and the addition of plasticizer in PVC, decreased with the increase of the film thickness and mechanical orientation. The WVTR's of the laminated films O. PP/LDPE, N.Nylon/LDPE, C.PP/LDPE were also more dependent on the film thickness than the WVTR's of the single films.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.1
• /
• pp.42-49
• /
• 2022

In this study, the surface protection film based on organic-inorganic composite is manufactured for suppressing lithium dendrite growth, and the film is applied on the surface of Li metal negative electrode for lithium metal batteries (LMBs). The film is consist of the polyvinylidene fluoride (PVDF) polymeric binder which has good mechanical strength and high electrochemical stability, and carbon black (Super-P) which has outstanding electrical conductivity as the inorganic compound. First, in order to confirm the suppression of the internal short circuit by the lithium dendrite, the time required for the short circuit is measured while a constant current is continuously applied. As a result, the internal short circuit is delayed in proportion to the carbon black content of the film, and it is significantly delayed than bare Li metal electrode which does not use protection film. The cycle performance of the thick protection film (8 ㎛), is worse than that of the thin film (4 ㎛). However, as the carbon black content of the film increased, the cycle performance is improved. Thus, the surface protection film based on carbon black/PVDF composite can delay the internal short circuit, and has low overvoltage during the cycle. However, more stable cycle performance needs to be built through further improvements.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.588-593
• /
• 2010

New seven acrylic monomers with covalently bonded silicon, germanium, and tin were prepared for high refractive index materials. The monomers were copolymerized with a cross-linkable comonomer (Trimer) to prepare UV-films for optical characterization. The refractive index of the copolymers increased in proportion to the monomer content and extrapolated to determine that of homopolymer. $Ph_3Si$, $Ph_3Ge$, and $Ph_3Sn$ groups contributed to increase the refractive index of acrylic polymer, in which $Ph_3Sn$ was more effective than $Ph_3Ge$. The index increment confidently occurred with $Bu_3Sn$ attachment in comparison with aliphatic acrylic polymers. $Ph_3SnS$-attached acrylate polymer showed a refractive index of 1.671 at 589 nm. The index change was similarly observed at various different wavelengths (656, 830, 1310, and 1550 nm).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.77-77
• /
• 2003

디스플레이 소재나 자동차 글레이징 소재에 있어서 경량화나 충격성을 향상시키기 위하여 플라스틱소재를 기재로 응용하는 연구가 진행되고 있다. 본 연구에서는 폴리에틸렌테레프탈레이트(PET)와 폴리카보네이트(PC) 고분자 필름의 내마모성, Haze 성, 내수증기 차단성 등을 향상시키기 위하여 유기실리콘 전구체인 HMDSO 모노머와 산소를 사용하여 플라즈마 도움화학증착(PECVD) 하였다. RF출력과 HMDSO 투입량, 산소투입량을 변화시키면서 각 증착조건에 따른 생성된 필름의 화학결합구조와 표면조도, 헤이즈 특성에 미치는 영향을 FTIR-ATR, AFM, Hazemeter를 이용하여 알아보았다. HMDSO와 산소를 사용한 박막의 증착은 100 nm/min이상의 높은 증착속도를 가졌고, 증착실험에서 얻은 증착필름의 원소조성을 XPS를 이용하여 구한 결과, 종전의 다른 유기실리콘계 모노머를 사용했을 때보다 효과적으로 박막에 존재하는 탄소잔류물을 감소시키는 것을 확인하였으며, FTIR-ATR결과로 부터 플라스틱 기재의 차이로 인한 생성박막의 결합구조가 다름을 알 수 있었다. 본 연구로부터 HMDSO/02 시스템이 탄소함량이 낮은 박막을 형성시키고 내마모도가 좋은 박막을 증착시키는데 효과적인 것을 알 수 있었다.