• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.212-212
• /
• 2008

에폭시 수지는 화학적 열적 안정성과 절기 절연성 및 기계적 특성 등 여러 가지 우수한 특성에도 불구하고 난연성은 그 단독으로 만족시킬 수 없기 때문에 난연제를 첨가함으로써 난연효과를 얻어왔다. 기존에 할로겐 화합물인 브롬계 난연제는 우수한 난연효과에도 불구하고 연소시 유해물질이 발생되어진다. 그리하여 인계 난연제를 첨가하는 것이 고분자 시스템에 난연성을 부여하는 효과적인 수단으로 대두되어지고 있다. 이 실험에서는 인계 난연제와 브롬계 난연제를 10, 20, 30, 40wt% 첨가하여 epoxy composite 제작하였다. 제작된 epoxy composite를 UL-94V 방법으로 난연성 평가하여 브롬계 난연제 20wt%에서 V-0를 획득할 수 있었으나 인계난연제 40wt%에서도 V-0를 만족할 수 없었다. 난연제 함량에 따른 Dielelctric constant 및 loss는 브롬계 난연제를 첨가시 감소하였고, 인계난연제의 경우 증가하였다.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.36-46
• /
• 1998

The aim of this study was to develop the noise and vibration damping wood-based composites by using viscoelastic polymer materials. Polyvinylchloride(PVC) was plasticized with 20-140 phr bis(2-ethylhexyl) phthalate(DOP) and the dynamic tensile mechanical properties were measured at 110Hz and approximate temperature range -100 to 150$^{\circ}$ using a Rheovibron Instrument. The PVC/DOP blends were shown to be compatible in all proportions, and both T(E”$_{max}$) and T(tan${\delta}_{max}$) shifted to the lower temperature side as the DOP content increased. The vibration damping properties of wood/polymer composites were measured using the Rheovibron instrument in a bending mode. The composite damping factor(tan ${\delta}_{c}$) of wood /PVC-DOP/wood sandwich structure correlated with the loss factor and that of the coated structure correlated with the loss modulus(E”) of the polymer layer. In addition, the sandwich structure was found to be more effective in damping than the coated structure. The logarithmic decrement (${\Delta}$c) curve of a sandwich structure, which was determined by the free-free flexural vibration method was similar in shape to the tan ${\delta}_{c}$ curve.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2009

Polymer substrates were fabricated by using poly (phenylene ether) as a base resin, N,N'-m-phenylenedimaleimide (PDMI) as a crosslinking agent and decabromodiphenylethane as a flame retardant. The effects of crosslinking agent and flame retardant on physical properties such as dielectric property of the substrate were investigated. Thermal curing feature of PDMI with or without an initiator was analyzed by DSC, and then, PPE-PDMI test compositions were designed based on this result. Composite sheets were cast by film coater, laminated under vacuum and pressure, and then, the changes of dielectric constant, dielectric loss, peel strength, solder heat resistance and inflammability according to increasing amount of PDMI and flame retardant were evaluated, Dielectric constant and dielectric loss showed increasing trend with increasing amount of PDMI and flame retardant, but solder heat resistance and inflammability were improved. Peel strength was obtained higher than 1 kN/m when PDMI above 10 wt% was added, but slightly decreased as the amount of flame retardant increased. From the measured gel contents, the reaction mechanism of PPE-PDMI system was deduced to the formation of network structure by crosslinking PDMI with PPE rather than the formation of semi-IPN structure. In conclusion, the polymer composite substrate materials with dielectric constant of 2.52$\sim$2.65 and dielectric loss below 0.002 at 1 GHz were obtained and they will be proper for high frequency applications.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.457-460
• /
• 2002

현재 건축단열재, 흡음재, 바닥재로 사용되는 panel 성형, 제작하기 위해 다종의 유기고분자 matrix가 사용되고 있으며 polyurethane, vinyl acetate, urea-formaldehyde resin 또는 melamine-formaldehyde, phenol-form aldehyde resin 등을 사용하고 있으나 이러한 고분자 matrix를 사용한 건축용 panel의 경우 화재시 유독 gas와 더불어 급격한 화재전파의 매개체로 사용될 수 있어 난연제 첨가로 이러한 현상을 억제하고 있다.(중략)

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.113-119
• /
• 2021

Polymers are widely applied to construction materials due to their lightweight and excellent mechanical properties. However, owing to the combustible properties, polymers are one of the biggest reason of spreading large fires in fire accidents that occur frequently in the construction industry. Therefore, as a solution to this problem, many research has been conducted to impart flame retardancy by incorporating flame retardants to polymer matrix. Among these flame retardants, organic phosphorus-containing flame retardants have been attracting much attention because they have excellent compatibility with polymer matrix and low toxicity compared with halogen or inorganic-containing flame retardants. Accordingly, this study aims to design and synthesize an alkoxyamine-based organic phosphorus flame retardant to improve flame retardancy of polylactide which is an eco-friendly polymer used for construction materials.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.273-277
• /
• 2007

Cyclophosphazene derivatives were synthesized in order to use as a non-halogen flame retardant for ABS. Chlorocyclophosphazene was reacted with phenol, catechol, aniline, 1,2-diaminobenzene respectively, and each product was characterized by UL94 and LOI test for ABS resin. The physical properties of the sample containing these flame retardants were also characterized. The derivative synthesized from catechol showed best flame retardancy, and the derivative from phenol exhibited the flame retardancy in which the synergic effect was shown with novolac.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.300-303
• /
• 2012

Phase change of calcium carbontae crystals in crystallization of precipitated calcium carbonate was researched by adding additives such as ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentaacetic acid (DTPA), citric acid (CIT) and pyromellitic amid (PMA). At low temperature $20^{\circ}C$, calcite crystal was made. At high temperature $80^{\circ}C$, aragonite crystal was made without additives. At middle temperature $40^{\circ}C$ and $60^{\circ}C$, Aragonite crystal also made by adding EDTA, DTPA. The crystal growth of Aragonite was retarded by the presence of CIT, PMA and the single phase of calcite was made. It was found that additives were important factors to make the single phase of calcium carbonate.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.106-110
• /
• 2002

Gel-type polyacrylonitrile(PAN) polymer electrolytes have been prepared using ethylene carbonate(EC), propylene carbonate(PC) and dimethyl carbonate(DMC) plasticizer, $LiPF_6$ salt and $TiO_2$ ceramic filler. Electrochemical properties, such as electrochemical stability, ionic conductivity and compatibility with lithium metal and mechanical properly of polymer electrolytes were investigated. Charge/discharge performance of lithium secondary battery using these polymer electrolytes were investigated. The maximum load that the polymer electrolyte resists increased about two times as a result of adding $TiO_2$ in the polymer electrolyte containing EC and PC. Polymer electrolyte containing EC, PC and $TiO_2$ also showed ionic conductivity of $2\times10^{-3} S/cm$ at room temperature and electrochemical stability window up to 와 4.5V. Polymer electrolyte containing EC, PC, and $TiO_2$ showed the most stable interfacial resistance of $130\Omega$ during 20 days in the impedance spectra of the cells which were constructed by lithium metals as electrodes. Lithium metal secondary battery which employed $LiCoO_2$ cathode, lithium metal anode and $TiO_2$-dispersed polymer electrolyte showed $90\%$ of charge/discharge efficiency at the 1C rate of discharge.

• Membrane Journal
• /
• v.22 no.3
• /
• pp.224-233
• /
• 2012

To improve permeation performance of gas separation membrane, polysulfone hollow fiber membrane was prepared by wet-dry phase inversion method using Triton X-100 as non-ionic additive. And variation of gas permeation behavior by additive was investigated. Various spinning conditions such as air gap, concentration of polymer, dope tank temperature were controlled and these effects were studied. The morphology and gas permeation property of hollow fiber membranes were investigated using scanning electron microscope (SEM) and bubble flow meter respectively. We confirmed that the membranes added with Triton X-100 had a smooth external skin at various air gap length conditions. The macrovoids of these hollow fiber membranes were more developed with increase of air-gap from 4 to 90 cm and that induced higher permeance. The permeance of polysulfone membranes has the higher value at comparatively lower concentration polymer (30 wt% polysulfone) and lower concentration of additive (15 wt% Triton X-100). When temperature in dope tank was controlled, the membranes prepared at $100^{\circ}C$ showed low permeance because of volatilization of additive and solvent.

• Journal of Life Science
• /
• v.27 no.8
• /
• pp.930-936
• /
• 2017

The flocculating properties of bioflocculant Biopol32 produced by Pseudomonas sp. GP32 were investigated for application in industrial wastewater treatment. The major flocculating substance of bioflocculant Biopol32 was identified as polysaccharide. Many anionic flocculants need a counter ion to induce higher flocculating activity. The flocculating activity of bioflocculant Biopol32 was markedly increased by the addition of cationic ions ($Ca^{2+}$, $Al^{3+}$). The flocculating activity of bioflocculant Biopol32 was the most effective when 7.0 mM $CaCl_2{\cdot}2H_2O$ as coflocculant was added. The flocculating activity on the effect of pH and the temperature of the bioflocculant Biopol32 was compared with anionic commercial flocculant (polyacrylamide) and bioflocculant (zooglan from Zoogloea ramigera). In kaolin suspension, the highest flocculating activity was obtained at the bioflocculant Biopol32 concentration of 1.5 mg/l. A high flocculating activity was observed in the pH range of 5.0 to 8.0. The flocculating activity of bioflocculant Biopol32 was sustained up to $60^{\circ}C$, but decreased rapidly at over $70^{\circ}C$. In the batch culture, the charge density of bioflocculant Biopol32 was compared with flocculating activity. The larger the anionic charge density and apparent viscosity of bioflocculant Biopol32, the higher the flocculating activity. Therefore, we confirmed that the flocculating activity and apparent viscosity of bioflocculant Biopol32 was closely related to the charge density of bioflocculant Biopol32.