• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.536-541
• /
• 2005

Large displacement and rigidity about rubber component are expected by nonlinear and large deformation analysis in this study. Rubber is also used by the model of Mooney-Rivlin and the self contact between rubbers is established. There is the friction between rigid body and rubber, wall and floor. The nonlinear simulation analysis used in this study is expected to be widely applied in design, analysis and development of several rubber components which are used in automotive, railroad, and mechanical elements etc. By utilizing this method, time and cost can also be saved in developing new rubber product. The analysis of rubber components requires special material modeling and non-linear finite element analysis tools that are quite different from those used for metallic parts. The objective of this study is to analyze the rubber component with large deformation and non-linear properties.

• Rubber Technology
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2003

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.219-220
• /
• 2005

본 논문은 산소 플라즈마 처리에 따른 반도전성 실리콘 고무의 표면특성 변화를 조사하였다. 실리콘 고무는 각종 초고압 전력기기에서 절연부품으로 많이 사용되어 지고 있다. 하지만, 실리콘 고무가 가지고 있는 고유의 특성 때문에 반도전성 부품과 절연성 부품간의 계면이 접착이 잘 되지 않는 문제점이 나타난다. 이를 위해서 접착제를 사용하거나 표면 거칠기를 변화시키는 개질을 하기도 하지만, 이는 새로운 계면을 형성하거나 약점을 만드는 문제가 있다. 이를 위해 반도전성 실리콘 고무 표면을 산소 플라즈마 개질시켜, 표면을 활성화 시키는 역할과 표면을 균일하게 에칭시켜 기계적 interlocking 메커니즘으로 접착력을 향상시킬 수 있다. 본 실험에서는 산소 플라즈마 처리에 따른 반도전성 실리콘 고무의 표면을 표면에너지. XPS로 기본적인 표면특성을 조사하였다. 실험 결과, 단시간의 산소플라즈마 처리로 표면에 다수의 관능기가 관찰되었다. 이러한 산화층은 실록산 결합쇄가 산화된 실리카 유사층으로 밝혀졌다. 이로써 절연부와 접착 용이성이 기대되었으며, 벌크적인 실리콘 고무의 특성변화 없이 표면개질 만으로 우수한 계면특성을 얻을 수 있다.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.32-46
• /
• 2007

Mechanical properties of rubber material are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the material test and accelerated heat aging test were carried out. In order to investigate the effects of heat-aging on the material properties, hardness, elongation, stress-strain curves and dynamic characteristics were obtained from various test conditions. Also, rubber material coefficients were determined by both the uniaxical and equi-biaxial tensile tests.

• Rubber Technology
• /
• v.11 no.1
• /
• pp.1-11
• /
• 2010

• Elastomers and Composites
• /
• v.29 no.4
• /
• pp.309-322
• /
• 1994

• Rubber Technology
• /
• v.5 no.1
• /
• pp.1-11
• /
• 2004

• Rubber Technology
• /
• v.6 no.2
• /
• pp.99-111
• /
• 2005

• Elastomers and Composites
• /
• v.7 no.1
• /
• pp.59-67
• /
• 1972

• Elastomers and Composites
• /
• v.46 no.1
• /
• pp.2-9
• /
• 2011

Permeability to gases and vapors is an important function in tires, rubber tubes and diaphragms. It mainly depends on the rubber material. Generally, permeability increases in the following order: silicone rubber > NR > EPDM > SBR > NBR > FPM > ECO > IIR. And, for an elastomer permeability is also very much dependent on compounding. Many research works are reported in the area of gas permeability for formed rubber,$^{1-7}$ however, few studies are found for unformed elastomer products. Incorporation of nano-particles, use of thermoplastic elastomers and applying high barrier multilayer coatings are the main approaches to obtain a high barrier elastomeric product. In this paper, barrier article for vehicle is introduced.