• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.337-347
• /
• 2011

In this study, seismic resistance of concrete encased U-shaped steel beam-to-steel H-shaped column connections was evaluated. Three specimens of the beam-to-column connection were tested under cyclic loading. The composite beam was integrated with concrete slab using studs. Re-bars for negative moment were placed in the slab. The primary test parameter was the details of the connections, which are strengthening and weakening strategies for the beam end and the degree of composite action. The depth of the composite beams was 600mm including the slab thickness. The steel beam and the re-bars in the slab were weld-connected to the steel column. For the strengthening strategy, cover plates were weld-connected to the bottom and top flanges of the steel beam. For the weakening strategy, a void using styrofoam box was located inside the core concrete at the potential plastic hinge zone. The test results showed that the fully composite specimens exhibited good strength, deformation, and energy dissipation capacities. The deformation capacity of the beam exceeded 4% rotation angle, which is the requirement for the Special Moment Frame.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.161-168
• /
• 2020

Failure of fixed implant supported prosthesis is caused by biomechanical factors such as excessive occlusal stress and biological factors such as bacterial infections and inflammation. Implants with severe bone resorption that have worsened without being resolved due to implant complications should be removed and then new treatments should be planned, taking into account remaining teeth, remaining implants, and residual alveolar. The patient of this case removed some of fixed implant prosthesis of mandible. The condition of the remaining alveolar bone was reassessed for further implant replacement and a few implants were placed. Then implant assisted removable partial denture (IAPRD) treatment is performed using implant surveyed bridge as abutment. Through this treatment, the clinical results were satisfactory on aspect of masticatory function recovery and oral hygiene management.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.407-416
• /
• 2003

Although the requirement and optimum soil level of Si for oriental melon are still not well understood, silicate fertilizer is commonly applied to the oriental melon in plastic film houses where soil silicate level is relatively high. In this research the effects of silicate fertilizer on growth, fruit yield and fruit quality of oriental melon, and soil properties were investigated in plastic film house where the soil available silicate was $212mg\;SiO_2\;kg^{-1}$. Silicate fertilizer was applied in the rates of 100, 200, and $300kg\;10a^{-1}$. The application of silicate fertilizer could not increase the early growth of oriental melon, and also the fruit yield and quality were not different among the treatments. Available Si and P contents in soils and also Si and P contents in leaf of oriental melon of the different treatments were not significantly different. In the relationship between total Si in oriental melon leaf and soil silicate extracted by 1 N sodium acetate, optimum soil available silicate level for oriental melon was found to be around $100mg\;SiO_2\;kg^{-1}$. These results indicate that the additional silicate fertilization in soils of available silicate higher than $100mg\;SiO_2\;kg^{-1}$ is unnecessary, and such application of silicate can not have any beneficial effect on the growth and fruit yield of oriental melon.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.311-315
• /
• 2005

This study was conducted to investigate the effects of disregarding of heat detection on embryo production in superovulation of Hanwoo cows. Donors which showed 1 or 2 times of normal heat and had no abnormality of reproductive tract were selected The superovulation was performed injection of 2.5 mL FSH (Antorin R-10, Japan) 2 times on 5 days before next heat and continuously with the reduction of dose to 0.5 mL of first injection 2 times in a day for next 3 days. Otherwise, the donors of CIDR group were inserted CIDR plus (with the capsule of estradiol benzoate 10 mg) on Day 10 from standing heat for 9 days. On 6 days from insertion of CIDR, FSH was injected above same manners. The response according to the natural heat and CIDR were $82.2\%,\;89.7\%$, respectively. There were no difference between both treatments. The recovery rates of embryos were 7.7, 10.5, respectively and transferable embryos were 3.4, 3.8. There showed significant difference between both treatments (p<0.05). These results suggested that disregarding of heat detection in superovulation could be produced transferable embryos for embryo transfer and preserve the donors from the excess hormonal administration and maintain the economical lift span of genetically available Hanwoo donors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.458-463
• /
• 2015

This study was conducted to investigate the mixed seeding of 5 forage barley varieties (youngyang, yuyeon, dami, wooho, soman) with 1 malting barley variety (hopum). Yield of the mixed seeding was compared with each single seeding and variety combinations. Yield of mixed seeding combination was higher than each single seeding. In mixed seeding of 'Youngyang' and 'Hopum' (50% and 50% ratio), 'Yuyeon' and 'Hopum' (70% and 30% ratio), 'Dami' and 'Hopum' (50% and 50% ratio), 'Wooho' and 'Hopum' (50% and 50% ratio) were higher yield of dry weight than yield of other mixed ratios. Most of all, mixed seeding of 'Dami' and 'Hopum' were high yield mixed seeding (ratios of 50% each other). In generally, the yields of barley mixed seeding with malting barley 'Hopum' were high production. The forage quality of mixed seeding combination was higher than any each single seeding. 'Youyeon' 50% and 'Hopum' 50% ratio was more higher TDN content (69.2%) than any other mixed combination.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.35-42
• /
• 2016

Room-temperature operating CdZnTe(CZT) material is an innovative radiation detector which could reduce the patient dose to one-tenth level of conventional CT (Computed Tomography) and mammography system. The pixel and pixel pitch in the imaging device determine the conversion efficiency of incident X-or gamma-ray and the cross-talk of signal, that is, image quality of detector system. The weighting potential is the virtual potential determined by the position and geometry of electrode. The weighting potential obtained by computer-based simulation in solving Poisson equation with proper boundaries condition. The pixel was optimized by considering the CIE (charge induced efficiency) and the signal cross-talk in CT detector system. The pixel pitch was 1-mm and the detector thickness was 2-mm in the simulation. The optimized pixel size and inter-pixel distance for maximizing the CIE and minimizing the signal cross-talk is about $750{\mu}m$ and $125{\mu}m$, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.738-746
• /
• 2019

Instead of hydraulic actuation systems, an electromechanical actuation system is more efficient in terms of weight, cost, and test evaluation in the thrust vector control of the 7-ton gimbal engine used in the Korea Space Launch Vehicle-II(KSLV-II) $3^{rd}$ stage. The electromechanical actuator is a kind of servo actuator with position feedback and uses a BLDC motor that can operate at high vacuum. In the case of the gimballed rocket engine, a synthetic resonance phenomenon may occur due to a combination of a vibration mode of the actuator itself, a bending mode of the launcher structure, and an inertial load of the gimbals engine. When the synthetic resonance occurs, the control of the rocket attitude becomes unstable. Therefore, the requirements for the stiffness have been applied in consideration of the gimbal engine characteristics, the support structure, and the actuating system. For the 7-ton gimbal engine of the KSLV-II $3^{rd}$ stage, the stiffness requirement of the actuation system is $3.94{\times}10^7N/m$, and the direct drive type electromechanical actuator is designed to satisfy this requirement. In this paper, an equivalent stiffness analysis model of a direct drive electromechanical actuator designed based on the stiffness requirements is proposed and verified by experimental results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.417-426
• /
• 2021

Recently, use of the precast concrete (PC) system, which can increase economy by minimizing field work, has rapidly increased. However, the PC system cannot exhibit structural performance under construction, specifically before integration between members. Furthermore, since it is difficult to secure the structural integrity of beam-column joints even after construction, the PC system is vulnerable to progressive collapse. In the PC system, various types of details for PC beam-column joints have been proposed, while the structural/construction details of PC system generally used in Korea differ from those of overseas PC systems. However, studies on the progressive collapse of the domestic PC system are limited. Thus, in this study, we investigated the structural/construction details of PC beam-column joints mainly used in Korea. Based on the investigation, for the prototype PC system with typical joint details, a nonlinear finite element analysis was carried out to evaluate its structural performance under progressive collapse. Further, a parametric study was performed, and the effect of the design parameters was investigated, to recommend a method to improve the progressive collapse resistance of the PC system.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.37.3-38
• /
• 2017

우리나라의 천문 관측의 기록의 역사는 삼국시대 이전 선사시대까지 거슬러 올라간다. 선사시대에는 천문 현상을 바위나 건축 유물에 기록을 남기고 역사를 기록하기 시작한 이후에는 일반 역사 기록 속에 항상 함께 기록하고 있다. 특히 동양은 역사기록 자체가 인간이 남긴 자취뿐만 아니라 하늘과 땅에 일어나는 다양한 자연 현상도 함께 동시에 남겼다. 고대로부터 인간은 하늘과 땅과 항상 유기적인 관계를 갖는다고 믿었기 때문이다. 우리나라는 정사로서 가장 오래된 역사 기록인 삼국사기와 삼국유사에 일식, 혜성 출현, 별똥과 유성우, 달과 행성 운행, 초신성 관측 등 250회 이상의 천문 기록이 나타나며 대부분 실제로 일어났던 사실을 그대로 기록하고 있다. 그 후 고려사와 조선왕조실록에는 이루 헤아릴 수 없을 정도로 많은 천문 기록을 남기고 있다. 이러한 천문 기록뿐만 아니라 일찍부터 중국으로부터 역법을 도입하여 천체 운행을 이용하여 우리 생활에 필요한 시각법을 사용하고 달력을 제작하였다. 특히 달과 태양의 운행 원리를 파악하여 일식과 월식을 직접 추산하였다. 역법의 운용은 천체 운행의 원리를 이해하고 수학을 발전시키는데 큰 역할을 하였다. 이러한 천문 관측과 정확한 시각 체계를 유지하고 정밀한 역법을 사용하기 위해서는 끊임없이 천체를 정밀하게 관측할 필요성이 있다. 이를 위해 다양한 천문 관측기기를 개발하고 제작하였다. 천문 의기는 천체의 위치를 측정하고 천체의 운행을 이용하여 시각 체계를 유지 관리를 위해 필수불가결한 기기이다. 우리나라 천문학 발달의 네 가지 축인 천문(天文), 역법(曆法), 의상(儀象), 구루(晷漏)등은 조선 초기 세종시대 완성을 보게 되었다. 이는 단일 왕조가 이룬 업적으로 다른 문화권에서 볼 수 없을 정도의 우수한 과학 기술의 유산이다. 특히 칠정산내편과 외편의 완성은 중국의 역법에서 벗어나 독자적인 역법을 완성하려는 시도였다. 이 모든 것은 당시 이를 주도하던 세종대왕의 지도력과 천문학과 수학에 뛰어난 천문학자가 이룩한 업적이다. 그 후 조선 중기로 접어들면서 쇠퇴하다가 임진왜란과 병자호란을 겪으면서 거의 모든 과학기술의 유산이 파괴되거나 유실되었다. 조선 현종 이후에 세종시대의 유산을 복원하려는 노력 중에 중국을 통하여 서양의 천문학을 도입하게 되었다. 중국에 들어와 있던 서양 선교사들이 주도하여 중국의 역법 체계를 바꾸었다. 즉, 일식과 월식의 예측력이 뛰어난 시헌력을 만들어 사용하기 시작했다. 시헌력에는 서양의 대수학과 기하학을 이용한 다양한 수학적 기법이 사용되었다. 조선 후기에 이 시헌력을 익히기 위한 노력을 하는 과정에서 서양의 수학과 기하학을 접하게 되고 새로운 우주 체계를 도입하게 되었다. 특히 서양의 천문도와 지도 제작에 기하학의 투사법이 사용되어 복잡한 대수학적 계산을 단순화시켜 활용하였다. 조선 후기에 전문 수학자뿐만 아니라 많은 유학자들도 서양의 수학과 기하학에 깊은 관심을 갖고 연구하였다. 고천문학 전체를 조망해 볼 때 핵심은 현대의 천체물리학이 아니라 위치천문학이다. 따라서 고천문학을 연구하는데 필수적인 요소가 지구의 자전과 공전 운동에 의해서 일어나는 현상과 세차운동에 의한 효과를 정확하게 이해하고 있어야 한다. 그중에서도 구면천문학과 천체역학에 대한 원리를 알고 있는 상태에서 접근해야 한다. 고천문학의 중심인 천문(天文), 역법(曆法), 의상(儀象), 구루(晷漏) 등의 내용은 이러한 위치천문학이 그 기본 골격을 이루고 있다. 예를 들어 고려사의 천문 현상을 모아 놓은 천문지(天文志)와 일식과 월식 계산 원리가 들어있는 역지(曆志)를 연구하기 위해서는 위치천문학의 기본 개념 없이는 연구하는데 한계가 있다. 인문학을 전공하는 학자가 고천문을 연구하는데 가장 큰 걸림돌이 되는 점이 위치 천문학의 기본 개념 없이 접근하는 것이다. 심지어 조선시대 유학자들조차 저술한 많은 천문 관련 기록을 보면 상당부분 천체 운행 원리를 모르고 혼란스럽게 기록된 내용이 적지 않다. 우리나라 수학사를 연구할 경우 방정식 해법, 보간법, 삼각법, 일반 기하 원리에 대한 것을 연구하는데 큰 문제가 없다. 그러나 천문 현상이나 천문 의기 제작에 사용되는 수학은 천문 현상에 대한 원리를 모르면 접근하기 어렵게 된다. 수학사를 하더라고 기본적인 위치 천문학의 기본개념을 이해하고 있어야 폭 넓은 수학사 연구에 성과를 거둘 수 있다. 의외로 천문 현상 추산을 위해 사용되는 수학이나 기하학 원리가 수학사 연구에 중요한 요소가 된다. 더구나 한문으로 기록된 천문 내용을 한문 해독이 능숙한 학자라 하더라도 내용을 모르고 번역하면 도무지 무슨 내용인지 알아볼 수 없는 경우가 많다. 그래서 한문으로 된 천문 현상 기록이나 역법 관련 기록의 번역 내용 중에 많은 오역을 발견하게 된다. 문제는 한번 오역을 해 놓으면 몇 십 년이고 그대로 그 내용을 무비판적으로 인용하게 되고 사실로서 인정하는 오류를 범하게 된다. 이 때문에 우리 선조들이 남긴 고천문 관련 기록에 관한 이해는 우리 현대 천문학자의 역할이 대단히 크다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.3
• /
• pp.105-112
• /
• 2003

Effects of magnesium sulfate ($MgSO_4$) and magnesium hydroxide $[Mg(OH)_2]$, which have different chemical characteristics, on soil pH, electrical conductivity (EC), and exchangeable cation distributions were investigated. Using plastic columns packed with a loam soil, the two Mg-fertilizers were treated at the rate of $300kg\;MgO\;ha^{-1}$ and water was applied on the soil surface four times at every 7 days. Soil samples were taken at 5, 10, 15, and 20 cm depth after 7 days of each water application. Magnesium hydroxide could increase soil pH, but due to the low solubility of $Mg(OH)_2$, the effect on pH was limited on the surface soil. Soil pH was lowered in the $MgSO_4$ treatment and the effect was found through the 20 cm depth. Since the pH decrease in $MgSO_4$ treated soil was due to the salts from $MgSO_4$, after leaching of most salts from the investigated soil depth pH was not significantly different from that of non-treated soil. Soil EC was increased in $MgSO_4$ treatment through the soil depth, but in $Mg(OH)_2$ treatment EC was slightly increased only at the surface layer. Exchangeable Mg was increased in both of the treatments at surface layer after the first water application. In $Mg(OH)_2$ treatment, the increase of exchangeable Mg was found only at 5 cm depth through the experiment, but leaching down of Mg in the $MgSO_4$ treatment was very apparent. High concentration of Mg in the $MgSO_4$ treated soil could effectively replace exchangeable Ca through the investigated soil depth, but the effect of $Mg(OH)_2$ on exchangeable Ca was not significant.