• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.9-25
• /
• 1977

As a successive work of the variation studies of natural Pinus densiflora stands, some characteristics of individual trees of the three natural populations selected from the Kwang-won Province, the middle-east part of Korean peninsula, as shown in the location map, were investigated. And the statiscal differences between individuals within population, and between populations were analysed. Twenty trees from each population were selected for this study purpose. Doing this, those trees lagged in growth, usually showing poorer form, were eliminated. The results obtained are summarized as follows: 1. Though the average population ages had the ranage between 50 and 63, the growth of height or diameter was similar. Population No.9 is, however, considered to have better tree forms at glance. Population No.8 showed the heighest value not only in the clear-stem-length ratio. 0.53 but also in the crown-index 0.91. The higher value can be result from those trees having long lateral branches and relatively short crown height, meaning undesirable crown shape. In regard to the fine branchedness and the acuteness of branching angle, the population No.9. is considered to be a better one, whereas there was almost no difference in crown height among populations. 2. Checking the frequency distributions of the ratio of the clear-stem-height to the total height and the crown-indices, some difference between populations are considered. These might be attributed to the previous way of stand mangement which alters the density. 3. In the serration density, the average number of 54 per 1cm needle length, the significant differences exist between individual trees within population but not between populations. A few trees which extremly high serration density were observed. As in serration, so tendencies were in the number of stomata row and resin duct. 4. The population 8 had the resin duct index value of 0.074 as the highest which was twice or triple of the other ones. 5. The patterns of increasing process of the average 10-year-ring-segment were not similar till the 30 years of age, but beyond this, the tendency lines were aggregated. 6. Regading the average summer wood ratio, no diffrence between populations, but in the ranges, i.e. 23 to 30 in population No.8. and 16 to 36 in population No.9., with regad to the specific gravity of wood, there were hardly observed any difference between populations even in the ranges values. As the increase of tree ages, the increase of specific gravity was followed but the increasing patterns were not similar between populations. 7. No significant differences between populations in the average tracheid length and the range were detected. However, the length was increased according to the age increase. The increasing pattern was same between populations.

• Conservation Science in Museum
• /
• v.20
• /
• pp.13-30
• /
• 2018

Ancient metal objects with inlaid designs were mainly decorated using the wire inlay technique in which "V"- or "U"-shaped grooves were cut in a metal object and then filled with gold or silver. Previous studies on ancient metal objects featuring wire inlay generally attempted to ascertain the inlay techniques applied by examining photomicroscopes acquired during conservation treatment. However, they had limitations when examining wire inlay technique to the minute details. Wire inlay technique can be better investigated by enlarging X-ray films of relics using stereoscopic microscopy under transmitted light. The core processes of the wire inlay technique involve cutting grooves using a chisel and creating the inlay wires, but researchers hold varying opinions about the two processes. This study analyzed the entirety of the materials able to shed light on the main processes applied in Baekje wire inlay by examining X-ray films of relics through stereoscopic microscopy. This exhaustive research revealed that two types of techniques were used for wire inlay during the Baekje period. One is a plastic process of engraving dotted lines using a chisel and is found mostly in objects from the Cheonan and Gongju areas. The other is a cutting process that incises fine lines and was used mostly in relics from the Osan, Seosan, and Wanju areas. It is likely that the Baekje wire inlay techniques feature regional differences because the respective techniques were used or introduced by different groups of people.

• Journal of Conservation Science
• /
• v.26 no.2
• /
• pp.143-148
• /
• 2010

A bronze dagger excavated from the historical site at Bongili in Gyeongju was examined for its microstructure and chemical compositions. The results show that it was forged out of the Cu-10 weight % Sn alloy having no lead. The application of forging in fabrication and the use of an unleaded alloy distinguish this artifact from other bronze daggers that have been reported in Korea, the majority of which were cast from leaded Cu-Sn alloys. This dagger is a rare and valuable archaeological material suggesting a unique bronze technology practiced in ancient Gyeongju area.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.293-300
• /
• 2005

The importance of ICT is being emphasized in this information-oriented society. In the 7th curriculum, it is necessary to use ICT more than 10% in teaching every subjects to keep pace with this trend. The distinctive feature of the curriculum lies in the introduction of various gradations and levels of the individual students. In this paper, by designing and applying the teaching idea based on educational contents, we analyzed how it has an effect on achieving of studies. As the results of this research, we found that teaching based on educational contents made students the meaningful increasement of interest in the controlled group and according to the increasement of the achievement in studying, the improvement of teaching are confirmed.

• KOMUNHWA
• /
• no.68
• /
• pp.7-24
• /
• 2006

This article is the critical review of the methods and assumptions with which the Korean archaeologists have tried to approach to the Bronze age society. It was not until the 1980s' that there had been any attempt to define the relevant units for the study of past societies. Before the archaeological records of megalithic builders in the Bronze age began to be analyzed to find out the general traits of chiefdom society, Korean archaeologists had described the variations in the cultural, rather than the social, entities. From the 1990s' , some scholars have attempted to reconstruct the scale and organization of the social groups and explain the growth of polities in evolutionary view, analyzing the hierarchical distributions of settlement data. In the concluding remarks of the review, I would like to indicate the some problems in the conceptualization of the material culture patterning in the regional and/or inter-regional level. First, the conceptual problem which appeared when the Bronze archaeologists define the distribution of artifact assemblages, composed of the specific artifact traits , beyond the instrumental categories that are efficient for the establishments of regional chronologies. It is evidently erroneous conceptualization that we define the artifact assemblages as the socio-cultual entities which came into being in specific time and place, geographically expanded, and finally disappeared based on the view of essentialism. Second, the interpretative problems about wide distributions of certain bronze artifacts must be indicated. I would like to suggest that the wide distributions of the specific bronze dagger or mirror types should be explained not by the cultural area concept related to the ethnicity assumptions, but by the world system or the inter-regional interaction models.

• Journal of Conservation Science
• /
• v.23
• /
• pp.81-93
• /
• 2008

The analysis of ancient DNA (aDNA) in paleogenetics has become an increasingly important subject of archaeological, anthropological, biological as well as public interest. In this study, paleogenetic analyses were carried out on the human skeletal remains from a historical cemetery site in Myeongam-ri, Asan, Korea. Archaeological records show that this particular location had been used as a habitation or mortuary site as early as the Bronze Age and up until the Joseon Dynasty. Human remains of twenty individuals out of forty-nine tombs from the Goryeo to Joseon Dynasty were selected for the analysis of this study. In order to identify the genealogy of the population and traditional burial pattern of the cemetery, we conducted comparative analyses of the hyper variable regions (HVRs) in mitochondrial DNA (mtDNA) of each sample. A number of cautious steps were taken at all experimental stages in order to avoid erroneous recombination by the segmental and modern contaminations derived from the researchers. We sequenced segmental amplicons of HVRs andassigned relevant haplogroups according to the sequence polymorphism on the basis of the known mtDNA database. The result shows that diverse haplogroups were unexpectedly present in the small population group of the Myeongam-ri site. This diversity appears to be related to the geographical conditions and archaeological properties of the Myeongam-ri site.

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.123-137
• /
• 1992

We analyzed a time series composed of the annual precipitations of Seoul based on the measurements of a Korean raingage and a modern raingage. The precipitations measured with a Korean raingage for the period of 1771 to 1907 are followed by the precipitations with a modern raingage for the period of 1908 to 1990. The latter part of the time series of annual precipitations were obtained from a book for annual precipitations of Korea by Korea Meteorological Administration and the former from Wada's table 1 for monthly precipitations reproduced from the daily rainfall measurements by a Korean raingage for the period of the Yi Dynasty. In our analysis three different precipitation regimes clearly stand out of the entire period. In order to define objectively the period of each precipitation regime we made a time series of 9 year moving averages from the above time series. By taking into account the shapes of the moving average time series and by using a threshold value of annual precipitation 1050 mm, we defined three precipitation regimes of wet period 1(WP1), dry period (DP), and wet period 2 (WP2). The WP1 and WP2 show very similar characteristics in out statistical analyses. On the other hand, DP is very different from the two periods in many statistical aspects. The strong similarities of the WP1 and WP2 regimes in the magnitudes of statistical parameters and in the shapes of their power spectrum distribution are supporting very positively the soundness of precipitation amounts measured with a Korean raingage in spite of numerous conceivable errors which might have been introduced into measurements of precipitation due to changes of observation site and environment, the scale of units employed, and urbanization of Seoul, etc. However, the annual precipitation amounts are not enough to examine throughly the characteristic of precipitation variations during the two regimes. It is definitely necessarly to recover the daily amounts of precipitation, based on two or three times measurements of rainfall with a Korean raingage, scattered in various ancient documents such as the official diary of 'Seungjeong-weon'

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.33-50
• /
• 2006

Around Yeongsan river basin, there are Yeongkwang Gundong, Muan Inpyeong Tombs, Muu Gusan-ri Tombs and Hampyeong Guksan remain from which a lot of iron artifacts were excavated. Among them, 6 iron artifacts were chosen, and their microstructures were analyzed. As a result, Iron artifacts were produced sponge iron by the low temperature reduction process and a part of microstructure have the possibility that steel made by decarburizing. And also, by tempering the parts which need high strength, the iron artifacts had high strength and by distributing the weakness of the tempered structure to the nearby untempered parts, their breaking was prevented and they had the durability. These skills were used then. Especially these skills were found to be used in the 2nd century by high skilled people because an iron axe excavated at Yeongkwang Gundong of 2nd century by the historical record showed that the skill was used. Also microstructures were found to show the possibility that the iron technology was inherited to the late 5th century. When producing iron artifacts made of sponge iron containing small amount of carbon, that was made by the production process repeating molding, carburizing, heat treatment and hammering.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.3
• /
• pp.488-515
• /
• 2011

The purpose of this study is to provide policy implications for vitalizing u-health services. We carried out survey of 500 consumers and indepth interview with various experts. Both experts and consumers believe that u-health services will become prevalent in the longrun, although there exist obstacles against vitalization of u-health services. To vitalize u-health service, the Korean government should raise reliability and recognition of u-health service for consumers. Furthermore, law and institution regarding u-health services should be improved to give enough incentives for u-health suppliers and consumers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4564-4571
• /
• 2012

This study performed a virtual reality exercise program for self-back pain control of industrial workers with chronic back pain and analysed their physical function and health-related quality of life relating to industrial chronic back pain. The subjects of the study were thirty chronic back pain patients working for K company and were divided into Nintendo Wii Sports Group made of 15 subjects and Physical Therapy Group made of 15. As variables for physical functions, back strength, flexibility, balance and pain were measured and for the health-related quality of life, SF-36 of each group was measured before and after the exercise program. To compare differences before and after the program, a paired t-test was used and to compare differences between both groups, an independent samples t-test was used. As a result of the test, it was discovered that balance and pain of the both groups were improved statistically significantly. Physical functions of the Nintendo Wii Sports Group were improved statistically significantly in comparison with those of the Physical Therapy Group. The health-related quality of life was improved statistically significantly only for the Nintendo Wii Sports Group. In conclusion, it is suggested that as the virtual reality exercise program had a positive influence on chronic back pain of industrial workers, it should be considered as a home exercise program for back pain control.