• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2497-2504
• /
• 2013

This study aims to analyze the 'Standard Drawings for School Facilities' issued by Seoul Education Committee in 1975 because it is the early example for middle school architecture. The results of this study are summarized as follows 1) In general trend of single-corridor type block plan, there are also changes in floor plan like no-corridor type block plan, $9.9{\times}6.6m$ classroom unit for the better daylight condition, built-in storage for students. 2) As for elevation design, it is characterized as daylight-oriented, functional exterior for without making full use of design elements. 3) Standardized dimensions are used as a rule in the height of story, ceiling, window sill and etc. Transitional characteristics of the early RC school architecture are found in exposed ceiling, incomplete insulation structure and mixed use of wood framed floor of earlier type. 4) Contrast to main school building, gymnasium shows the intend to express the symbolism of school architecture with diverse elevation design elements and the plasticity of building mass. 5) Separated plan of toilet and night-duty building also show the transitional characteristics. As conclusion, though showing the stereotyped school architecture, on the other hand, 'Standard Drawings for School Facilities' (1975) makes it possible to see the way of coping with the demands for school architecture in that time and the transition of school architecture. This is the main value of it as the material for the studies related to the history of educational facilities.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.284-288
• /
• 2005

본 연구에서는 낙동강수계 일별 운영 계획 수립을 위한 저수지군 최적 연계운영 모형(CoMOM, Coordinated Multiple Reservoir Operating Model)을 개발하였다. 이를 위하여 동적 네트워크 흐름 모형을 기반으로 한 다중목적 혼합 정수 목표계획 모형 (MOMIGP, Multiple Objective Mixed Integer Goal-Programming)을 수립하였다. 이 모형은 월말 목표 수위 및 운영 제약 등을 목표 계획법으로 구성하였으며, 일별 운영의 특성을 고려하여 하도추적의 효과를 반영하였고, 선형화된 발전함수를 이용하여 발전량을 최대화 하도록 한 후 정확한 발전량을 사후에 산정하였다. 이와 같이 수립된 수학 모형을 GUI를 비롯한 프로그램(CoMOM)으로 개발하여 사용자가 편리하게 수행 할 수 있도록 하였다. 이 프로그램은 의사결정자의 운영 목표와 의도를 효과적으로 반영할 수 있도록 대화형 목표 계획법을 구현하였으며, 상충되는 여러 목적에 대하여 가능한 파래토(Pareto) 최적해를 제시하고 의사결정자가 가장 선호하는 해를 선택하도록 대화형 다중목적 계획법 CBITP(Convex hull of individual maxima Based Interactive Tchebycheff Procedure)를 활용하여 구현하였다. 한편 객체지항적 프로그램 기법을 활용하여 수계 내의 노드(저수지, 수요지, 발전소 등)를 추가 하거나 삭제 할 수 있도록 하여, 다른 수계로의 확장이 용이하도록 개발하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.338-339
• /
• 2011

본 연구는 해양플랜트 지원선 중 작업자들에게 전용거주시설을 제공하는 생활바지선 거주구공간계획에 관한 연구이다. 생활바지선의 거주구는 '작업자영역', '서비스영역', '승무원영역', '업무영역'으로 공간을 분류할 수 있다. 본 연구에서는 현재 사용되고 있는 10척의 생활바지선 일반배치도(GA)를 조사하여 거주공간특성을 분석하였다. 또한 해양플랜트 거주구 설계시 가장 많이 참조되는 ABS, NORSOK 등 해외선급협회에서 제시하는 해양플랜트 거주구 공간설계지침을 분석하여 생활바지선에서 거주구 공간계획에 적용하기위한 설계지침을 제시하였다. 그리고 생활바지선 거주구 설계모델을 설정하고 모델을 대상으로 데크별 공간배치와 동선을 계획하였다. 마지막으로 거주구 설계모델의 객실, 식당, 주방, 휴게공간 그리고 위생시설 등 주요공간을 대상으로 공간계획을 실시하고 계획안을 제시하였다. 최근 국내 조선업계에서도 생활바지선에 대한 관심이 증가하고 있으나 거주구 공간설계기술의 부족으로 외국 설계업체에 의존하고 있는 형편이다. 따라서 우선 한국선급협회에서 본 연구결과를 기초 생활바지선 거주구 공간계획을 위한 설계지침을 시급히 만들어야만 한다.

• Journal of Wetlands Research
• /
• v.11 no.3
• /
• pp.71-80
• /
• 2009

Due to the various characteristics of urban river, rehabilitation project for natural river requires distinct alternative approach and selection method for each different types of river. In this study, naturalness of a river was used to establish such alternative for the business and rehabilitation plan for natural river. To assess the naturalness of a river, through AHP, designed to fit the environmental conditions in Korea, was employed. Furthermore, a method that conveniently compares and selects an alternative for rehabilitation plan for natural river by referencing Urban River Basin Enhancement Methods (URBEM) was proposed. After selecting the evaluation items for assessing the naturalness of the river based on the characteristics of the river, multiple alternatives were constructed and the naturalness of river for each of those alternatives were estimated. Comparing the estimated values has made the measurement of the natural recovery effect and the product of river rehabilitation plan for each alternative efficient. In conclusion, selecting the items for evaluating the naturalness of a river with respect to its characteristics was found to be effective for establishing the rehabilitation plan for natural river.

• The Journal of shipping and logistics
• /
• v.35 no.1
• /
• pp.21-50
• /
• 2019

The aim of this study is to analyse a characteristic analysis of coastal passenger vessels' voyage scheduling using the Panel Regression Analysis. The GLS and Fixed Effect Analysis show that the number of canceled flights and passenger transport performance have a positive impact on the voyage scheduling, and that the freight transport performance and freight income vary from model to model. Also, through the LSDV and OLS analysis, the trend of cluster formation by regional office was confirmed. This indicates that there are frequent changes in passenger ship companies and ships, and in-depth plans are needed in various respects rather than the expansion of unconditional ships. Subsequent studies need to generate more detailed and practical results by further analysis of detailed factors, dividing them by route and vessel type.

• Tunnel and Underground Space
• /
• v.34 no.4
• /
• pp.413-420
• /
• 2024

When planning gripper TBM, which is highly applicable to urban areas, the excavation characteristics are not considered. In addition the excavation stability and constructability are degraded by installing reinforcements in the adjacent construction site considering the relaxation load theory of the pre-existing NATM. In this study, a rationalization plan for the support was proposed considering the excavation characteristics of gripper TBM when planning reinforcements for adjacent pre-existing construction. The effect of excavation on the surrounding ground was analyzed by conducting three-dimensional stability analyses considering the construction stage for each excavation phase. In NATM, relaxation phenomenon is concentrated in tunnel face due to non-supporting time occurring simultaneously with excavation, but gripper TBM supports the ground around the tunnel face through the cutter head and skin plate, simultaneously causing ground relaxation behind the skin plate. Considering these excavation characteristics, problems in reinforcement planning for adjacent construction at the study site were pointed out. A performance improvement plan for a reasonable supporting system was proposed.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.638-650
• /
• 2014

The objective of this study is to identify the causes of pedestrian volume path to the destination by investigating the influential levels of regional and planning features in the central area of Seoul. Regional characteristics can be classified from the result of the analysis and through the spatial characteristics of pedestrian volume. For global scale analysis, Ordinary Least Squares (OLS) regression is used for the degree of influence of each characteristics to pedestrian volume. For the local scale, Geographically Weighted Regression (GWR) is used to identify regional influential factors with consideration for spatial differences. The results of OLS indicate that boroughs with transportation facilities, commercial business districts, universities, and planning features with education research facilities and planning facilities have a positive effect on pedestrian volume path to the destination. Correspondingly, transportation hubs and congested areas, commercial and business centers, and university towns and research facilities in the Seoul central area can be identified through the results of GWR. The results of this study can provide information with relevance to existing plans and policies about the importance of regional characteristics and spatial heterogeneity effects on pedestrian volume, as well as significance in the establishment of regional development plans.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.143-149
• /
• 2010

The river master plan was established every 10 years in Korea. The basin characteristics of 62 small and medium size rivers of which master plans were recently established during the past three years in Gyeonggi-do were investigated, and design rainfalls and design floods in the past and the latest were compared and analyzed. It was predicted that basin data and flood estimating method changed design flood. The quantitative amount of design floods were analyzed for 6 basins like Gungunchen etc. As the results, the increasing factors of design flood were the application of critical duration time, temporal time of rainfall and the increase of CN value. The decreasing factors of design flood were the application of Huff's rainfall distribution instead of Mononobe one and the ARF. The application of critical duration time increased flood about 60% whereas the application of Huff's rainfall distribution method estimated less flood than Mononobe about 62%. Considering critical duration time and changing rainfall distribution were the most important factors of increasing or decreasing design flood. However, trends of flood variation were differently analyzed by factors in 6 basins because characteristics of topography, weather, hydrology and hydraulic were different, now that correlations were not found between factors and flood variation. Flood variation is evaluated by complex effects of factors so new flood recalculated by reasonable methods should be considered as design flood.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.11a
• /
• pp.99-104
• /
• 2005

유비쿼터스는 시대를 선도 또는 대표하는 하나의 중심 키워드로 자리하고 있고 도시 분야에서도 U-City 추진 전략에 관한 다양한 논의가 진행되고 있다. 본 연구는 최근 우리나라에서 이루어지고 있는 유비쿼터스 관련 계획들의 동향과 특성을 비교분석하고, 바람직한 U-City 건설의 방향을 제안하고 이를 위한 도시계획적 접근 방안을 찾아보고자 하였다.

• Korean Management Science Review
• /
• v.11 no.3
• /
• pp.27-34
• /
• 1994

본 연구에서는 우리나라의 경영과학 입문자들이 선형계획 모형 개발 및 해석을 용이하게 할 수 있도록, 사용하기 편리하고 안정된 선형계획법 소프트웨어를 만들었다. 이 소프트웨어는 풀 수 있는 문제의 크기는 50 * 50으로 제한한 반면 한글로 모두 처리되도록 하였으며, 풀다운 메뉴방식으로 user friendly하며, 입문자들이 쉽게 이해할 수 있는 LINDO식 입력방식을 취하였으며, 패키지 내부에 완벽한 Editing 기능을 갖고 있어서 모형의 수정 보완이 매우 편리하게 되어 있다. 본 논문에서는 이 소프트웨어의 특성과 구조를 살펴본다.