• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.991-998
• /
• 2022

The purpose of this study is to develop GPU (Graphics Processing Unit) acceleration technique for 2-dimensional model and to assess the effectiveness for high resolution flood simulation in wide area In this study, GPU acceleration technique was implemented in the G2D (Grid based 2-Dimensional land surface flood model) model, using implicit scheme and uniform square grid, by using CUDA. The technique was applied to flood simulation in Jinju-si. The spatial resolution of the simulation domain is 10 m × 10 m, and the number of cells to calculate is 5,090,611. Flood period by typhoon Mitag, December 2019, was simulated. Rainfall radar data was applied to source term and measured discharge of Namgang-Dam (Ilryu-moon) and measured stream flow of Jinju-si (Oksan-gyo) were applied to boundary conditions. From this study, 2-dimensional flood model could be implemented to reproduce the measured water level in Nam-gang (Riv.). The results of GPU acceleration technique showed more faster flood simulation than the serial and parallel simulation using CPU (Central Processing Unit). This study can contribute to the study of developing GPU acceleration technique for 2-dimensional flood model using implicit scheme and simulating land surface flood in wide area.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.428-428
• /
• 2023

글로벌 위성 기반의 강수량 관측에 대한 역사는 1979년에 Arkin의 의해 제안된 IR(Infra-Red) 방법에 의해 위성으로부터 강우자료를 유도하는 개념이 도입된 이후 1987년 해양에서의 비교적 정확한 강수량 추정이 가능한 다중 채널의 마이크로파(MW) 복사계를 이용한 방법에서 1997년TRMM(Tropical Rainfall Measurement Mission)위성의 PR(Precpipitation Radar)의 레이더를 이용하는 방법, 그리고 2014년 GPM(Global Precipitation Measurement Mission) 핵심 위성(GPM Core Observatory)에 탑재된 Dual PR에 의한 방법으로 위성강수의 정확도를 매우 높여가고 있다(Kim et al. 2013). 한국과 아세안의 경제협력이 증가하면서 국내 ODA 정책에서 아세안은 가장 우선적인 대상이 되었다. 정부는 2011-2015년 기간에 라오스 등 26개 국가를 중점협력국에 포함시켰고, 2021~2025년간 적용될 제3기 중점협력국에 라오스를 포함하고 있다. 본 연구는 위성영상으로부터 유도된 위성강수 자료를 이용하여 라오스의 남능강 유역에 대한홍수량을 추정하는 것을 목적으로 하였다. 분석자료인 위성강수 자료는 GSMaP 위성강수 자료를 이용하였다. 이 자료는 1시간의 시간해상도와 0.1°의 공간해상도를 갖는다. 라오스 남능강 유역 9개 지점의 2019년 8월~9월까지의 총강수량 비교 결과 9개 지점의 1일 관측강우의 경우 유역내 평균 약 699.2mm였고, 위성강수는 425.4mm로 위성강수가 과소추정되는 결과를 보이고 있으나 두 자료간의 결정계수(r²)는 약 0.79의 정확도를 보이는 것으로 분석되었다. 위성강수를 이용한 홍수량 분석 결과 같은 시기에서 남능강 유역 출구점의 첨두유출량은 약 5,786m³/s로 분석되었다. 분석도구는 한국건설기술연구원에서 개발하여 운영중인 GRM 강우-유출 모형을 이용하였다. 향후 위성강수와 지점강수의 조합에 의한 다운스케일링 기법에 대한 연구를 수행하여 계측자료가 부족한 지역에서의 홍수량을 분석하는 연구를 진행할 계획이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.315-315
• /
• 2023

급격한 기후변화에 기인하여 전 세계적으로 거듭되는 돌발홍수로 인한 피해가 급격히 증가하고 있는 실정이다. 우리나라에서도 최근 중소 규모의 하천 뿐 아니라 도시 생활하천, 도심지 저지대에서 갑작스런 홍수와 침수로 인해 많은 인명과 재산 피해를 경험하고 있다. 이런 문제를 인식하여 최근 정부차원에서 다양한 센서와 인공지능에 기반하는 많은 인프라 및 연구 투자가 이루어지고 있지만, 높은 설치 및 운영 비용과 우리나라의 복잡한 하천 환경 특성으로 인해 소하천이나 도심지 저지대에서는 그 효율성을 제대로 발휘하지 못하고 있다. 따라서 본 논문에서는 주변환경의 변화에 강인한 복합 센서단말을 통해, 하천 정보(유량, 유속, 수위 등)을 실시간 측정하고, 해당지역의 특성을 고려한 하천 또는 저지대의 위험도를 스스로 판단할 수 있는 기술을 제안한다. 또한, 본 논문에서는 제안한 저비용 초소형의 단말 장치로 지점의 하천 정보를 실시간 측정하여 IoT망을 통해 3차원 하천 디지털트윈 모델로 전달하여, 유속과 수위를 그대로 재연함으로써, 하천 침수 위험 감시의 효율성을 검증하였다. 3차원 DEM(Digital Elevation Models) 데이터와 실제 하천을 관측한 데이터를 이용한 디지털트윈 검증 결과, 데이터 전송 지연시간을 감안하여 3초 이내에 하천의 수위와 유속이 3차원 모델에 반영되는 것을 확인하였다. 이 결과로부터 열악한 환경에서도 실시간 하천 상황을 원거리에서 모니터링 할 수 있으며, 강우와 유출에 따른 하천 홍수 메카니즘을 새롭게 시뮬레이션할 수 있는 방법론을 제시할 수 있을 것으로 기대한다.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.263-273
• /
• 2016

This study applied conditional merging (CM) spatial interpolation technique to obtain the satellite and in-situ composite soil moisture data. For the analysis, 24 gages of hourly in-situ data sets from the Rural Development Administration (RDA) of Korea and the satellite soil moisture data retrieved from Advanced Microwave Scanning Radiometer-Earth observing system (AMSR-E) were used. In order to verify the performance of the CM method, leave-one-out cross validation was used. The cross validation result was spatially interpolated to figure out spatial correlation of the CM method. The results derived from this study are as follow: (1) The CM method produced better soil moisture map over Korean Peninsula than AMSR-E did for the over 100 days out of total 113 days considered for the analysis. (2) The method of CM showed high correlation with gage density and better performance on the western side of Korean peninsula due to high spatial gauge density. (3) The performance of CM is not affected by the non-rainy season unlike to AMSR-E data is. Overall, the result of this study indicates that the CM method can be applied for predicting soil moisture at ungaged locations.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.83-86
• /
• 2015

Nowadays the weapon systems are employed air bursting munition (ABM) as smart programmable 40 mm shells which have been developed in order to hit the target with programmed munition that can be air burst after a set distance in the battlefield. In order to improve the accuracy of such a bursting time, by measuring the speed of the munition from the barrel, weapon systems calculate the exact time of flight to the target and then the time information must be inputted to the munition. In this study, we introduce a device capable of detecting a shot at K4 40 mm automatic grenade. The shot is composed of a rotating copper band to convert linear motion into rotary motion when it passes through the barrel, the steel section is exert the effect of fragment and aluminum section to give fuze information. The aluminum section was used to detect munition using eddy current method. To measure muzzle velocity by means of non-contact method, two eddy current probes separated 10 cm was employed. Time interval between two eddy current probe detection times was used as muzzle velocity. The eddy current probe was fabricated U-shape Mn-Zn ferrite core with enamelled copper wire, and 200 kHz alternating current was used to detect inductance change. Measured muzzle velocity using the developed sensor was compared to the Doppler radar system. The difference was smaller than 1%.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.55-67
• /
• 2022

In this paper, fundamentals and recent development of the interferometric synthetic aperture radar, known as InSAR, technique for measuring ground deformation through satellite image analysis are presented together with case histories illustrating its applicability to urban ground deformation monitoring. A study area in Korea was selected and processed based on the muti-temporal time series InSAR analysis, namely SBAS (Small Baseline Subset)-InSAR and PS (Persistent Scatterers)-InSAR using Sentinel-1A SAR images acquired from the year 2014 onward available from European Space Agency Copernicus Program. The ground settlement of the study area for the temporal window of 2014-2022 was evaluated from the viewpoint of the applicability of the InSAR technique for urban infrastructure settlement monitoring. The results indicated that the InSAR technique can reasonably monitor long-term settlement of the study area in millimetric scale, and that the time series InSAR technique can effectively measure ground settlement that occurs over a long period of time as the SAR satellite provides images of the Korean Peninsula at regular time intervals while orbiting the earth. It is expected that the InSAR technique based on higher resolution SAR images with small temporal baseline can be a viable alternative to the traditional ground borne monitoring method for ground deformation monitoring in the 4^th industrial era.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.39-47
• /
• 2022

In this paper, we proposed a thickness measurement method of concrete slab using GPR, and the verification of the suggested algorithm was carried out through real-scale experiment. The thickness measurement algorithm developed in this study is to set the relative dielectric constant based on the unique shape of parabola, and time series data can be converted to thickness information. GPR scanning were conducted in four types of slab structure for noise reduction, including finishing mortar, autoclaved lightweight concrete, and noise damping layer. The thickness obtained by GPR was compared with Boring data, and the average error was 1.95 mm. In order to investigate the effect of finishing materials on the slab, additional three types of finishing materials were placed, and the following average error was 1.70 mm. In addition, sampling interval from device, the effect of radius on the shape of parabola, and Boring error were comprehensively discussed. Based on the experimental verification, GPR scanning and the suggested algorithm have a great potential that they can be applied to the thickness measurement of finishing mortar from concrete slab with high accuracy.