• Bulletin of the Society of Naval Architects of Korea
• /
• v.41 no.1
• /
• pp.33-47
• /
• 2004

조선기자재는 선박의 건조 및 수리에 사용되는 모든 기계와 자재류를 일컫는 것으로, 선종과 규모에 따라 다소 차이가 있으나 약460여종에 이르며 선박 건조원가의 55∼65%를 차지하고 있다. 선박부품인 조선기자재는 기능별로 나누어 금속제품, 화학제품, 용접재료, 주단제품으로 구성되는 선체부, 엔진을 포함하는 추진장치와 보조기계로 대별되는 기관부, 조타, 계선, 하역, 안전장비 및 거주설비 등의 의장부 및 동력, 배선, 조명, 항해통신, 제어장치 등으로 구성되는 전기ㆍ전자부로 분류된다. 특히 최근에는 방화ㆍ방재 설비로 대표되는 안전설비를 의장부에서 별도로 분류하기도 하며, 선박의 자동화 추세에 따라 전기와 전자부분을 분리하여 분류하기도 한다.(중략)

• Journal of Drive and Control
• /
• v.10 no.4
• /
• pp.14-21
• /
• 2013

The numerical analysis of the automatic ship mooring system which was equipped in the ship for trying to berth at the pier was performed in this study. The automatic ship mooring using hydraulic winch was a new method that had not need to change the existing devices and to help a pilot ship of outside. The numerical results of the proposed mooring system including ship motion were that the speed and rolling phenomenon of ship was affected by changing in the ship weight and affected the slope maintenance and yaw degree of ship if there has a trim of stern. Also, a static force of ship at the initial movement was important to calculate the mooring power. The moving force and inertial force of ship on the vertical direction was confirmed for the mooring stability. Therefore, the power and velocity of hydraulic mooring winch should be determined by considering the significant characteristics such as weight, velocity, inertial force and moving force of ship.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.1
• /
• pp.73-83
• /
• 1987

한국형 해저원유 초기생산 시스템은 제주도 남쪽의 한.일 공동개발구역 및 이와 유사한 조건의 지역에서 소규모 유전이 발견되었을때, 빠른 시간내에 저렴한 초기투자비로 석유를 생산할 수 있도록 개발되었다. 이 시스템은 원유저장용 선박, tower, yoke, gravity base 및 원유처리장치들로 구성되어 있으며 각 구조믈들은 pin 또는 universal joint들로 연결되어있다. 본 구조물의 파도중에서의 동적거동은 전산 program을 이용하여 구하여 wave tank에서 수행된 실험의 결과와 비교, 검토하였다. 그리고 이들 결과를 이용하여 구조적 안전성을 검토하였으며, 설계, 해석 및 model test의 결과들은 선급협회의 승인을 받았다.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.288-294
• /
• 2013

Chest digital tomosynthesis was the most advanced digital radiography technology, but it was higher patient dose than conventional chest radiography. Thus we tried to reduce a patient dose of chest digital tomosynthesis and evaluated its image quality. Result shows that radiation dose such as ESD, DAP and ED were 1.95 mGy, 17.66 $dGycm^2$ and 0.133 mSv respectively in default setting and 0.312 mGy, 2.27 $dGy.cm^2$ and 0.052 mSv in use additional filter, respectively. Doses were decrease 66.2%, 73.6% and 57.4% in ESD, DAP and ED, respectively. At the image quality assessment, overall sensitivities of use additional filter for nodule detection were not inferior to default mode for peripheral, central and peripheral micro nodules. However, sensitivity of low dose mode was significantly inferior to the default for central micro-nodules(p < .001).

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.501-508
• /
• 2005

The purpose of this paper is to present the alternatives for improving coostal shipping logistics system to be a logistic hub-nation with a competitive edge. For this purpose, major environmental factors in Northeast Asia and accordingly its effects are analyzed And then the effects of coastal shipping system's development strategy is analysed using Structural Equation Model and Multiple Regression Model. Research results show that three types of coastal shipping development strategy( connected transportation system, structure of coastal shipping system, governmental support policy) will contribute much to being a logistics hub-nation. From the results, some implications are derived as follows. Firstly, environmental-friendly balanced ocean-coastal transport system is required Secondly, a excusive feeder port, Ro-Ro ship & high-speed ship are necessary to establish the one-stop logistics service system Finally, governmental support policy and subsidy(tax-exempted oil & various tax benefits) are required to reactivate lagged coastal shipping system to be a logistic hub-nation with a competitive edge.