• Title/Summary/Keyword: 계산 측정법

Search Result 1,253, Processing Time 0.045 seconds

Beacon-based Indoor Location Measurement Method to Enhanced Trilateration (삼변측량법을 개선하기 위한 이용한 비콘 기반의 실내 위치 측정 방법)

  • Kwak, Jeonghoon;Sung, Yunsick
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2017.04a
    • /
    • pp.907-909
    • /
    • 2017
  • 실내 환경에서 무인항공기(Unmanned Aerial Vehicle, UAV)를 활용하기 위해서는 실내에서 UAV의 위치 계산 방법이 요구된다. 실내 환경 내에서 위치를 측정하기 위해 블루투스 기반의 비콘(Beacon)과 세 개 이상의 AP(Access Point)를 활용하여 개선된 삼변측량법으로 위치를 계산한다. 개선된 삼변측량법을 활용하여 UAV의 위치를 계산하는 과정에서 AP에서 측정한 비콘의 거리 오차로 인해 개선된 삼변측량법으로 계산한 UAV의 위치에 대한 문제가 발생한다. 이 논문에서는 위치를 계산하는 과정에서 개선된 삼변측량법을 적용하는 과정에서 발생하는 문제를 해결하는 방법을 제안한다. 실험에서는 실내에서 제안한 방법을 활용하여 위치 측정한 결과와 기존의 삼변측량법을 활용하여 위치 측정한 결과를 비교하여 검증한다. 제안한 방법을 이용하여 기존의 삼변측량법을 68.67%의 위치를 개선하였다.

Comparative Study of Radiation Exposure using Entrance Skin Dose Calculation Technique in Diagnostic X-Ray Radiography (입사 표면 선량 계산에 따른 진단용 X-선 촬영시 피폭선량 비교 연구)

  • Han, Jae-Bok;Choi, Nam-Gil;Sung, Ho-Jin
    • The Journal of the Korea Contents Association
    • /
    • v.11 no.12
    • /
    • pp.357-363
    • /
    • 2011
  • The aim of this study is to compare radiation dose in diagnostic X-ray radiography and calculated by different mathematical equation. The result of ESDs direct measurement and that calculated by Mori NDD-M shows the biggest difference. On the other hand, equation by Edmonds shows the lowest difference of ESDs. Also, Rectification due to the difference between direct dose measurement and calculation method commutated three-phase, single phase and inverter type, show less difference in the drive way. In conclusion, this study can be helpful for expecting radiation dose-exposure and control exposure parameters for the diagnostic x-ray radiography.

송전선의 도체표면 및 지표면 전계 강도 계산법

  • 김정부;민석원;박종근
    • 전기의세계
    • /
    • v.39 no.3
    • /
    • pp.21-25
    • /
    • 1990
  • 지금까지의 송전 선로 전계 강도계산은 무한 경계치를 갖는 2차원 문제로 간략화하여 계산하지만 실제의 경우는 매우 복잡한 경계치를 갖는 3차원 문제이다. 예로 송전 선로 치하에 있는 동치물 및 물체에 유도되는 전자계의 경향을 해석하기 위해서는 3차원 물치 계산법이 요구된다. 따라서 이 분야의 연구자들은 3차원 수치 계산법과 측정 기법에 대한 연구, 개발을 계속해야 할 것으로 생각된다.

  • PDF

Application of the Velocity Index Method for Discharge Computation in Tidal River Basin (감조하천의 유량산정을 위한 유속지수법의 적용)

  • Song, Jae-Hyun;Lee, Suk-Ho;Kim, Chi-Young;Lee, Jin-Won;Jung, Sung-Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2009.05a
    • /
    • pp.1342-1345
    • /
    • 2009
  • 조위영향을 받는 감조하천에서는 조위변화의 주기적인 특성으로 인해 일반적인 수위와 유량의 관계가 성립하기 어렵기 때문에 최근 ADVM(Acoustic Doppler Velocity Meter) 또는 UVM (Ultrasonic Velocity Meter)과 같은 자동 유량측정 기법을 통한 연속유량측정이 이루어지고 있다. 한강대교 수위관측소는 대표적인 감조구간으로 이러한 문제를 해결하기 위해 ADVM 방식의 자동유량측정시설이 설치되어 운영 중에 있으며, H-ADCP 센서를 통해 측정된 유속을 Chiou의 무차원단면유속분포법을 이용하여 유량을 계산한다. 이는 최대유속을 유량산정의 지표로 하여 유량을 계산하는 방법으로, 본 연구에서는 한강대교 자동유량측정시설의 측정성과를 이용하여 유속지수법과 무차원유속분포법에 의해 산정된 유량을 비교하였고, 앞의 방법들을 검증하기 위하여 2008년 ADVM을 이용한 이동보트법으로 측정된 유량과 비교하였다.

  • PDF

Precision and accuracy of CARS spectrometer for instantaneous temperature measurement (순간 온도 측정을 위한 CARS 분광기의 정밀 정확도 분석)

  • 박승남;박철융;한재원;길용석;정석호
    • Korean Journal of Optics and Photonics
    • /
    • v.7 no.4
    • /
    • pp.348-356
    • /
    • 1996
  • A mobile CARS spectrometer is constructed to measure the instantaneous temperature of gases, of which software include the quick fit methods and a least square fitting method to obtain temperatures from the spectra. Two quick-fit-methods give smaller variance of temperatures than the least square fitting method even though they consume much shorter time to yield temperatures. The precision and accuracy of CARS temperature is measured in the graphite tube blackbody furnace in reference to a radiation pyrometer. The accuracy of the CARS temperature is $\pm$2% from 1000K to 2400K and the precision is $\pm$35K at 1600K with the most accurate quick-fit-method. As a demonstration of the instantaneous measurement, the spectrometer is applied for measurement of the turbulent combustion at a certain condition. eograms(HS) are made using a relatively small number of synthesized 2D images. The influence of aliasing artifacts caused by insufficient or improper sampling is presented, and a new sampling theory is proposed, which is used to making holographic stereograms. Also, the optical system for extension of viewing distance and viewing zone is proposed. Results of this analysis can be applied to design normal holographic stereograms and computer based holographic stereograms.

  • PDF

Non-Destructive Measurement of Residual Stresses at the Interfaces of Composites (복합 재료 계면의 잔류 응력 측정을 위한 비파괴 평가 기술)

  • 정용무
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1996.11a
    • /
    • pp.179-189
    • /
    • 1996
  • X-선 회절법에 의하여 Graphite 화이버-알루미늄 매트릭스 복합 재료 계면에서의 잔류 응력을 정량적으로 측정하였다. X-선 회절법으로 측정한 잔류 응력 값과 수치 해석 모델 계산 결과와 비교하였다. 모델 계산 결과보다 낮은 측정 결과를 얻었으며 이는 매트릭스의 응력 이완 또는 화이버의 basal palne sliding 현상에 기인한 것으로 추정된다.

  • PDF

건강 나이 측정법

  • KOREA ASSOCIATION OF HEALTH PROMOTION
    • 건강소식
    • /
    • v.30 no.6 s.331
    • /
    • pp.32-33
    • /
    • 2006
  • 건강 나이라는 개념을 정리하여 대중적으로 알리기 시작한 사람은 미국 시카고 프리츠크의대의 마이클 로이젠 교수이다. 그는 2만 5,000여 건의 임상 연구를 토대로 질병, 습관, 유전, 환경 등 인간 수명에 영향을 미치는 125가지 기준을 선정하여 건강 나이 계산법을 만들었다. 우리나라에서는 서울백병원 가정의학과 김철환 박사가 미국의 자료와 우리나라의 임상 자료를 토대로 우리 실정에 맞는 '건강 나이 측정법'을 고안하여 보급하였다.

  • PDF

The Calculation and Measurement of Flash Point for Water+1-Propanol and Water+2-Propanol Using Closed Cup Aparatus (밀폐식 장치를 사용한 Water+1-Propanol 과 Water+2-Propanol의 인화점 측정과 계산)

  • Ha, Dong-Myeong;Lee, Sungjin
    • Journal of Energy Engineering
    • /
    • v.25 no.4
    • /
    • pp.190-197
    • /
    • 2016
  • Flash point is the one of the important properties for the safe handling of inflammable liquid solution. In this paper, flash points of binary liquid solutions, water+1-propanol and water+2-propanol, were been measured by using Seta flash closed cup aparatus. Flash point was estimated using regression analysis method. Flash points were also estimated by the method based on Raoul's law and the method optimizing the binary parameters of van Laar equation. Experimental results were compared with the calculated results. The regression analysis method is able to estimate the flash point fairly well for water+1-propanol and water+2-propanol mixture.

헵타메틴 시아닌색소의 전기화학적 특성 분석

  • Kim, Yeong-Seong;Sin, Jong-Il;Park, Su-Yeol;Jeon, Geun;Son, Yeong-A
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2009.11a
    • /
    • pp.21-22
    • /
    • 2009
  • 최근, 헵타메틴 시아닌색소(heptamethinecyanine)는 그 적용 범위가 넓기 때문에 많은 연구자들의 관심을 받고 있다. 특히, photo-sensitizers, dye lasers, optical recordings와 storage media 등 다양한 분야에 적용이 가능하다. 헵타메틴 시아닌색소의 주된 특징은 polymethine 사슬에 연결된 cyclohexene 고리에 의하여 근적외선 부근에서 흡수가 이뤄진다는 것이다. 근적외선 색소의 흡수 특성을 HOMO와 LUMO 에너지 전위를 사용하여, 수치화 함으로써 분자간, 분자내 상호작용을 분석 할 수 있다. 따라서, 본 실험은 헵타메틴 시아닌 색소의 치환체에 따른 전기화학적 특성을 순환 전압-전류법(Cyclic voltammetry)과 분자 모델링을 통하여 HOMO와 LUMO의 에너지 준위를 구하고, 치환체 효과가 헵타메틴 시아닌색소에 미치는 전기화학적 특성을 UV-Vis와 계산으로부터 얻어진 에너지준위를 분석하고자 한다. 본 실험에 사용된 Uv-Vis 스펙트럼 측정은 Agilent 8453 UV-Vis spectrophotometer를 사용하였고, 전기화학적 분석 방법인 순환 전압-전류법은 Versa STAT 3 (Princeton allied research in USA)를 사용하였다. 순환전압-전류법의 측정은 Acetonitrile 용액에 $TBAPF_6$ (Tetrabutylammonium hexafluorophosphate)를 전해질로 하고, Ag/$Ag^+$을 기준전극으로 사용하여 주사 속도를 50mV/s로 하여 측정 하였다. 치환체에 의한 영향을 알아보기 위하여 분자구조 최적화 모델링을 사용하였다. 3차원 분자입체 특성 및 에너지 준위 상태는 Materials studio 4.2를 사용하여 특성을 예측 하였다. 본 연구에서는, 헵타메틴 시아닌 색소의 기본 골격에 각기 다른 치환체를 치환 시켜 치환체에 의한 영향을 전기화학적인 방법인 순환 전압-전류법(Cyclic voltammetry)와 분자 모델링 방법을 사용하여, HOMO와 LUMO에너지 준위 값을 구함으로써 치환체에 의한 영향을 알아보았다. 치환체로는 Dye 1과 Dye 2로 치환된 헵타메틴 시아닌 색소를 사용하였다. 이렇게 얻어진 HOMO/LUMO 에너지 준위 값으로부터 이온화 에너지($I_p$)와 전자 친화도($E_a$) 또한 구할 수 있는데, $I_p$$E_a$는 분자 오비탈과 전자전이에 관련된 값들이고, 이는 계산을 통하여 얻을 수 있다. 순환 전압-전류법의 계산 방법은 봉우리 전위(peak postential)와 (onset potential)방법이 있는데, 이 계산을 통한 전위 값들이 봉우리 전위 계산 방법이 onset potential 방법에 비하여 작은 전위 값으로 나타난다. 하지만 이 두 가지 방법 모두 현재 순환 전압-전류법을 사용하여 HOMO/LUMO 에너지 준위를 측정하는 방법에 쓰이고 있으며, 어떠한 계산 방법이 더 정확하다고는 말 할 수 없지만, 본 실험 결과를 통하여 비교 분석한 결과 onset potential 계산 방법이 봉우리 전위 계산 방법에 비하여 정확하다고 판단된다. Dye 1과 Dye 2를 순환 전압-전류법으로 측정한 결과 각기 다른 전위를 나타내고 이것을 계산을 통하여 정량화하면 Dye 2가 Dye 1에 비하여 높은 전위 값을 갖음을 알 수 있는데, 이것은 ethyl 에 비하여 surful 원자의 전자공여성이 더 크다고 할 수 있다.

  • PDF

Optical Measurement of Evanascent Wave (광압측정법에 의한 소산파의 크기 측정)

  • 조형준;김두철;유영훈
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.07a
    • /
    • pp.242-243
    • /
    • 2003
  • 최근 유전체와 유전체, 유전체와 금속 물질 경계면에서 일어나는 계면 현상에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 유전체와 유전체 경계면에 형성된 소산파의 크기를 maxwell의 방정식을 이용하여 계산하고, 광학 trap을 이용한 광압 측정법을 사용하여 경계면에서 소산파의 크기를 실험적으로 측정하였다. 광압 측정 장치는 그림 1과 같다. (중략)

  • PDF