• Clean Technology
• /
• v.14 no.3
• /
• pp.193-203
• /
• 2008

A surfactant is used to assist the effect of cleaning, dispersibility and adhesion during leather manufacturing process. Existing surfactant for that process includes many hydrophilic groups that may cause problem such as stain, bad water resistance and poor durability, etc. It is potential problem to make high-performance property for future leather market. In this study, we have synthesized the fluorinated surfactant of which property decreases surface tension, increases dispersion, cleaning effect and the better chrome absorption by the high bond energy of C-F to complement weakness that the present alkyl derivative surfactants have. Using fluorinated surfactant, we can confirm that dispersion is increased, chrome absorption ratio is augmented with high osmosis and coherence, chrome content in the tanning waste water is reduced, BOD and COD contents are diminished and physical characteristics are improved.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.207-212
• /
• 2009

Surfactants were used as representative anionic and non ionic surfactants to investigate the effect of mass transfer on the mineral-catalyzed Fenton-like oxidation of sorbed phenanthrene. Mass transfer of phenanthrene on the oxide surface or interlayer between aqueous and solid phases was generated by surfactant addition. Apparent solubility of phenanthrene was increased as surfactant concentration increasesd. In tests using Tween 80, oxidation of phenanthrene decreased as apparent solubility increased. High apparent solubility was not responsible for oxidation of sorbed phenanthrene in the sand due to the surfactant acted as a scavenger of degradation. In tests with SDS, $H_{2}O_{2}$ decomposition rate in Fenton-like oxidation was decreased by complexation between goethite and SDS. However, in tests using 32 mM of SDS, efficiency of phenanthrene treatment increased compared to the test without SDS addition. Therefore, suitable amount of SDS addition could provide optimum condition for phenanthrene oxidation on the oxide surface or interlayer between aqueous and solid phase, and decrease $H_{2}O_{2}$ decomposition, and as a result, phenanthrene removal efficiency can be improved.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.491-500
• /
• 2015

Batch experiments were performed to determine the feasibility of the surfactant-enhanced soil washing process at various washing conditions for the Kuwait soil seriously contaminated with the crude oil. The soil was sampled at a dried oil pond in Kuwait and its average TPH concentration was 223,754 mg/kg, which was too high to apply the conventional remediation process. Nine commercialized non-ionic surfactants were used for the batch experiment to measure the surfactant solubility for the crude oil because it was reported that they have worked for the soil remediation. Among them, three surfactants having high crude oil solubility were used for the soil washing experiment. From the result of batch experiment, 5% TritonX-100 washing solution showed the highest TPH removal efficiency (67%) for the crude oil contaminated soil. However, because the residual TPH concentration in the washed soil was still higher than the clean-up level in Kuwait (10,000 mg/kg), the repeated soil washing was performed. After five washings with 2% surfactant solution, the cumulative TPH removal efficiency was higher than 96% and the residual TPH concentration in the soil went down below the clean-up level. To measure the desorption capacity of TritonX-100 remained in the soil after the soil washing, the silica beads and the soil were washed five times with 2% TritonX-100 surfactant solution and then they were washed again with distilled water to detach the surfactant adsorbed on beads or soil. After five washings with surfactant solution, 7.8% and 19.6% of the surfactant was adsorbed on beads and soil, respectively. When additionally washed with distilled water, most of the residual surfactant were detached from beads and only 4.3% of surfactant was remained in soil. From the results, it was investigated that the surfactant-enhanced soil washing process with TritonX-100, Tergitol S-15-7, and Tergitol S-15-9 has a great capability for the remediation of the Kuwait soil seriously contaminated by crude oil (more than 220,000 mg/kg).

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.27-31
• /
• 2012

This study was designed to examine the feasibility of functionalized mesoporous silica as the adsorbent for benzene, toluene, ethylbenzene, and xylene isomers (BTEX) in groundwater. p-Xylene was used as the model compound of BTEX. A series of functionalized mesoporous silica with MCM-41 type of structure was synthesized using a co-condensation method. Monoamine, triamine, nitrile, phenyl, and octyl groups were functionalized to the mesoporous silica structure. Adsorption sites for p-Xylene in a functionalized mesoporous silica were Si-O-Si covalent bond, the surfactant, and the functional group. Octyl-functionalized mesoporous silica with stearyltrimethylammonium chloride as a surfactant showed the highest adsorption ability. The maximum xylene adsorption capacity of the octyl-functionalized mesoporous silica with stearyltrimethylammonium chloride based on Langmuir model was 4.17 mmol/g on $20^{\circ}C$, which was 2.9 times higher than that of MCM-41.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2013

The adsorption characteristics of cationic starches and starch-oligomers were investigated using the quartz crystal microbalance with dissipation monitoring (QCM-D). The adsorbed amount of modified starches was higher than that of cationic surfactants such as $C_{12{\sim}16}$ trimethylammonium bromide. Cationic starches did not show the tendency depending on the degree of cationic substitution and molecular weight. On the other hand, the softness of the adsorption layer increased with the molecular weight of cationic starches in a viscoelasticity terms. During the adsorption/desorption steps, the amount of adsorbed cationic surfactants was 4~9 times. On the other hand, the difference in the amount of adsorption of all the $C_1$ grafted cationic starches was just 0~50%. In addition, the rigidity of the adsorption layer of cationic surfactant in the desorption step decreased, while, that of cationic starches increased at the same condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.679-688
• /
• 2000

Dispersants, which are used to break water-in-oil emulsions and to remediate oil-spills, are another water pollutants. In this study, magnetic separation technology was applied to remove dispersants from the sea. Magnetite and maghemite were used as magnetic sorbents and SDDBS, an anionic surfactant and Triton X-100, a nonionic surfactant, were employed as dispersants. Batch experiments were undertaken to study the sorption capacity and sorption equilibrium, and water-bath experiments were conducted to simulate the real situation and to describe the recovery of magnetic particles by the permanent magnet or electromagnet. Maghemite has rather constant removal efficiency for dispersants, regardless of surfactant species. On the other hand, removal efficiency by magnetite is higher for anionic surfactant than maghemite and is higher in distilled water than in seawater which contains more ions. The sorption of dispersants to magnetite is explained by electrostatic attraction and that of maghemite is described not only by electrostatic attraction, but also by structural characteristics that provide high sorption ability and surface condition. Water bath experimental results showed that recovery efficiency of magnetic particle after sorption for dispersants is nearly 100%. It is suggested that this magnetic separation technology is an effective way of dispersant removal because of short operating time, high sorption capacity, and high recovery efficiency of sorbents.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.1-10
• /
• 1996

Gibbs' adsorption isotherms are studied to assay the structural effects of ethylene oxide (EO) and propylene oxide (PO) moieties on the molecular area and the interfacial tension behavior of molecules at the interface. Several industrial alcohols and isomerically pure alcohols, which have a general stucture of C4H9O(EO)m(PO)nH, are examined for their cosurfactant properties. They are high molecular weight alcohols and more surface active than the cosurfactants usually used. Results show that the number and the sequence of EO and PO units significantly affect the molecular areas and the interfacial tension (IFT) behavior of these molecules at the water/oil interface. The following conclusions are drawn from the result: 1) PO is more efficient in lowering the IFT and less effective in adsorption than EO. 2) For molecules having the same molecular weight but different structures, smaller molecules are more efficient in lowering the IFT. 3) When more EO, PO, or both units are added to the same hydrophobe, the molecule become bigger and more efficient in lowering the IFT.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.241-257
• /
• 1999

Subsurface contamination of industrial hazardous organic substances is a serious social issue. Decomposing the hydrophobic organic compounds in the subsurface is technically difficult and the compounds can last as long-term contaminant sources of groundwater once they are sorbed on the soil. Although the danger of contaminated subsurface has long been recognized little was known about the effective remediation technique. Focusing on the remediation of the p-Cresol and 3, 5-Dichlorobiphenyl among subsurface contaminants, this paper studies the surfactant-enhanced desorption technique. Nonionic surfactant(Triton X-100) and anionic surfactant(SDS ) were used as desorbing solvents for extracting organic compound sorbed on soil particles. Sorption characteristics of soils and organic compounds were analyzed and the applications of surfactant solution were studied through batch tests and the flexible-wall permeameter tests. As a result of the sorption isotherm tests, a log-log linear relation was obtained between the linear-partition coefficient, $K_p$ and the octanol-water partition coefficient, $K_{ow}$ of each organic compound. The result of the batch test also showed that Triton X-100 at 0.5% of solution desorbs the 3, 5-Dichlorobiphenyl 28 times more than the water in the batch tests. The surfactant-enhanced subsurface remediation technique becomes more effective when the contaminants are hydrophobic and hard to be decomposed.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.299-307
• /
• 2004

Surfactant adsorption by two montmorillonite types with different interlayer cations of Ca and Na was characterized by examining the time dependence of surfactant behavior on the clay surfaces. Surfactants with different micelle concentration were conducted in our experiment to observe a nonequilibrium activity of cationic surfactant on the clay over reaction periods ranging from 0.1 min to 11 days. As compared with Ca-montmorillonite (SAz), a more active intrusion of surfactant molecules into the interlayers was found in Na-montmorillonite (SWy). During a short 'initiation' stage, the basal spacing of SWy montmorillonite increased rapidly with logarithmic time. For SAz montmorillonite, however, the abrupt basal spacing increase occurred at the later stage of the reaction. From the result, the difference in the adsorption behavior exhibited by the two montmorillonite types partly results from their intrinsic nature, that is, inorganic cations originally existing on the clay surfaces. Additionally, the micelle concentration of surfactants affects the development of organo-montmorillonite, especially, in the intercalant formation and stabilization under nonequilibrium.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2002.05b
• /
• pp.275-276
• /
• 2002

CaO는 물과 반응하여 발열반응을 일으켜서 CaO에 코팅된 계면활성제를 용해시키며 그리고 규산소다에 흡착된 중금속과 유기물을 고정화 시키는 역할을 담당한다. 그리고 규산소다는 물과 가수분해하여 다공성이 되면서 중금속과 유기물 등을 흡착시키는 역할을 담당한다. 또 CaO에 코팅된 계면화성제는 기름과 반응성이 우수하므로 $80^{\circ}C$～$90^{\circ}C$에서 용해하여 기름과 반응하는 특성을 갖고 있다. 미분 슬래그는 보간 중에 암석화되는 과정을 도와 주므로 시간이 경과하면 pH가 점점 중성으로 변화하는 현상을 보여 주었다.