• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.413-420
• /
• 2006

The construction of a submerged breakwater has become increasing due to their multiple effects on the coastal zone. Recently, marker rocks have been installed on the submerged breakwater to indicate its position to the vessels instead of buoy systems, since a buoy is not only improper for the ocean view, but also its mooring system may be damaged by the impulsive wave force caused by wave breaking on the breakwater. The accurate estimation of wave forces on such rocks is deemed necessary for their stability design. In this study, the characteristics of irregular wave forces acting on a marker rock, which was installed on a submerged breakwater, was investigated on the basis of laboratory experiments. It was revealed that the dimensionless highest one-third wave force tends to decrease with increasing the installation distance of a marker rock from the leading crown edge of a submerged breakwater. Also, the drag and inertia coefficients for irregular wave forces, which were obtained using the Morison equation, were investigated in relation to K.C. number.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.423-430
• /
• 2012

The purpose of Speed limit at sea is to keep harbor calmness, to maintain efficient traffic flow and to prevent maritime accidents. The Korean Regional Maritime Affairs and Port Office(KRMAPO) specified and enforced the ship's speed limits at the 19 harbors around the Korean coasts. However, problems have been raised to the adequacy of speed limits. This paper made a research on the speed limit set standards, analyzed vessel traffic survey and the dilemma on the specified speed limits imposed by KRMAPO. The result of this study has shown an overall average of 48 % violation rate on speed limit with passenger ships and large vessels of more than 5,000 tons having higher violation rate. Average speed was higher than the limit speed in some harbors and deviation of 4.2 to 5.2 knots was investigated. Further, harbors having higher average speed also have higher deviation accident incidence. Therefore, this paper had confirmed that there is a need for institutional review and improvement of Korea's port and fairways speed traffic management.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.911-916
• /
• 2012

The purpose of this study is to review and suggest coastal shipping policies for introduction of WIG craft into domenstic passenger shipping market. Two Korean companies are leading in the development of WIG craft as an innovative sea transportation vehicle, and it is awaiting for commercialization. WIG craft is expected to be commercialized from coastal passenger market and we used AHP method to investigate the major factors and its' priority for smooth market entry. The results shows that priorities are on the WIG craft legislation, dock installation and operation, port state control, and pilot hiring and training, craft maintenance, and ship's certification in order.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.3
• /
• pp.211-217
• /
• 2008

Natural environment, topographical conditions and marine traffic flows were investigated and questionnaire surveys were performed for the purpose of understanding the cause of marine accidents. The frequent cases of ships' dragging have happened at the anchorages of E-1, E-2 and E-3. The anchorage area is insufficient for the accommodation of a number of ships, the dolphins at the nearby piers are located near a narrow fairway. SBMs' are positioned too close to the fairway. It shows that many crossing marine traffic flows occur in all areas of the port. Marine casualties are concentrated mainly at No. 1 fairway, M1-M7 waters close to the dolphins and Gwanjeolgot, "E" anchorage and the waters close to the fairway "come and go" areas. The marine traffic flow is mainly caused by the ships' movement at the inter-port and most of the ships are the dangerous cargo carriers. And small ships like the tug-barge are moving disorderly in the ports. Furthermore, the fairway‘s layout is crossing each other. Questionnaire surveys of the users and experts shows that the LANBY that can distinguish the fairway of "come and go" ports is required.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.57-62
• /
• 2006

Busan New Port, under construction aiming for the hub of Northeast Asia and Partly in operation, had damaged up to 48 billion Won due to Typhoon 'maemi' in 2003. The present criteria of domestic harbor design only describes about the critical wave height with respect to the size of vessel for harbor tranquility. The berth operation ratio which represents the annual available berthing days is depending on the efficiency of cargo handling work and this depends on the motion of the moored vessel due to the wave action and the characteristics of cargo gears. The motion of moored vessel might be related not only to the wave height but also to wave period. Furthermore, the berth operation ratio relies on external forces such as currents and winds, including the characteristics of mooring system and the specification of the moored vessel. In this study we only deal with berth operation ratio in normal sea state, considering wave and current by measured data and numerical calculation. Especially we tried to evaluate the berth operation ratio for each berth adopting the variation of dredging and reclamation plan and the change of wave environment during the process of the new port construction. For better understanding and analysis of wave transformation process, we applied the steady state spectral wave model and extended mild-slope wave model to the related site. This study summarizes comparisons of harbor responses predicted by two numerical predictions obtained at Busan New port site. Field and numerical model analysis was conducted for the original port plan and the final corrected plan.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.6
• /
• pp.379-387
• /
• 2017

In this study, a pile-guide mooring system (PGMS) was designed for an offshore liquefied natural gas bunkering terminal (LNG-BT), which is an essential infrastructure for large LNG-fuelled ships. The PGMS consisted of guide piles to restrict five motions of the floater, except for heave, as well as a seabed truss structure to support the guide piles and foundation piles to fix the system to the seabed. Singapore port was considered for a case study because it is a highly probable ports for LNG bunkering projects. The wave height, current speed, and wind speed in Singapore port were investigated to calculate the environmental loads acting on the hull and PGMS. A load and resistance factor approach was used for the structural design, and a finite element analysis was performed for design verification. The steel usage of the PGMS was analyzed and compared with the material usage of a gravity-based structure under similar LNG capacity and water depth criteria. This paper also describes the water depth limit and wave conditions of the PGMS based on estimation of the initial investment and the present value profit difference. It suggests a suitable LNG-BT support system for various design conditions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.64-67
• /
• 2017

화물량이나 해상관광객 유입 확대 등 항만수요의 증가에 따른 대응으로 항만을 확장하거나 신규항만을 계획하게 된다. 우리나라 어항의 경우 경관이 수려하고 청정지역으로 분류되어 개발여지가 크다. 이중 감포항의 경우도 해상을 통한 연안 화물의 운송확장과 어항의 기능에서 연안항의 여건을 갖추고 경주와 연계한 해양 관광벨트를 구성하여 친수공간 조성, 송대말 등대 컨텐츠 사업 등 해양관광의 거점으로 도약하기 위한 집중개발을 추진 중에 있어서 종합적인 관점에서 항만확장을 검토할 필요가 있다. 본 연구는 추진 중인 항만확장과 관련하여 남측 및 동측의 항만확장안에 대해 선박의 통항안전 및 계류한계파고에 대한 항만 정온도 여부를 제 3세대 수치파랑 모형인 SWAN모형과 강비선형 Boussinesq 방정식을 적용한 불규칙파 Bouss-2D 모형을 적용하여 모형간 특성을 도출한 후 현재안과 각 대안별로 파랑반응특성을 비교분석하였다. 이에 대한 결과는 각 대안별로 장래 항만확장에 대한 기초자료로 활용될 수 있을 것이다.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2018

In this study, the operability of an FLBT (floating LNG bunkering terminal) was evaluated experimentally. Model tests were conducted in the KRISO (Korea Research Institute of Ships and Ocean Engineering) ocean engineering basin. An FLBT, an LNG carrier, and two LNG bunkering shuttles were moored side by side with mooring ropes and fenders. Two white-noise wave cases, one irregular wave case, and various regular wave cases were generated. The relative local motions between each LNG loading arm and its corresponding manifold in the initial design configuration were calculated from measured 6-DOF motions at the center of gravity of each of the four vessels. Furthermore, the locations of the LNG loading arms and manifolds were varied to minimize the relative local motions.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.55-62
• /
• 2011

Although the performance of the commercial vessel has been dramatically improved through innovations, there has been no big changes on the traditional anchoring method of commercial vessels, both on design and operation until now. In this paper, two cases of design modifications were introduced for optimized design of pocket type anchor handling, which resulted in improved performance of the vessel's anchoring. From the first time fully balanced type anchors were applied on vessels in Korean shipyard, main design problem on this application was that the anchor doesn't normally slide into the pocket when the anchor fluke is not in line with pocket, as the anchor freely rotates by the swivel on forerunner. In order to prevent the problem, swivel has been deleted on the forerunner to prevent anchor rotation until now, but this solution caused problems such as twist lock of anchor chain, restriction of windlass direction, etc. On this paper, one of the solution is introduced to overcome the design problem by tilting the hawse pipe to some extent, which makes anchor turned at the time anchor ring touches the pocket skirt and that it properly slides into the pocket. Secondly, one of the solution is introduced to overcome misalignment problem between anchor chain cable and roller of chain compressor, which has been frequently occurred, by modification of roller design.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.1
• /
• pp.58-65
• /
• 2012

In this study, to reduce the motion of the vessels resulting from resonance and secondary undulation by long-period waves, numerical review on the control performance of resonator was carried out by attaching the resonator to the established harbor of real waters. In the numerical analysis, CGWAVE MODULE of commercial software SMS(Surface water Modeling System), a finite element model based on 2-dimensional elliptical mild slope equation was applied, and through comparative analysis of the existing experiments and analysis results on the rectangular model ports, the validity of the friction coefficients in which validity and effectiveness of SMS on the secondary undulation analysis is applied was verified. Based on this, the control performance of resonator was confirmed through comparative review of the secondary undulation according to whether or not to attach the resonator to rectangular harbor. In addition, to reduce long-period motion of the moored vessels and the secondary undulation which may occur in Pohang new port, the method to move the resonant period which causes abnormal motion of the vessels to long-term one was discussed through application of the resonators with various sizes, thereby identifying the availability.