• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.29 no.4
• /
• pp.172-182
• /
• 2018

The present study was undertaken to examine if the carcass and pork quality of finishing pigs reared on a low plane of nutrition (LPN) could be improved compared with that of the pigs finished on a high plane of nutrition (HPN). Sixty-eight crossbred (LYD) barrows and 68 LYD gilts weighing approximately 50 kg were fed a diet containing 3.54 Mcal DE/kg with 1.00% lysine (HPN) or 3.02 Mcal DE/kg with 0.68% lysine (LPN) in eight pens up to approximately 120 kg and slaughtered. The belly, loin, ham, and Boston butt were cut out from a total of 20 carcasses, after which physicochemical and sensory quality attributes of the belly and the representative muscle of each of the loin, ham, and Boston butt were evaluated. The ADG, gain:feed ratio, and backfat thickness were less for LPN than for HPN (p<0.05). The cooking loss, hardness, and chewiness values for the Boston butt were less for LPN vs. HPN. In sensory evaluation for fresh meat (muscle), the subjective quality scores were greater for LPN vs. HPN in color, marbling, and acceptability for the loin, the muscle:fat balance score for the belly tending to be greater for LPN (p<0.10). In addition, LPN was superior to HPN in the flavor and juiciness in sensory evaluation for cooked ham. In conclusion, the present results suggest that the carcass and pork quality of finishing pigs could be improved with reduced growth performance by using LPN.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.474-482
• /
• 2018

The aim of this study was to determine and analyze probiotic contents, pH, and acidity of 120 samples of health functional and processed foods containing lactic acid bacteria distributed in 2017. The changes due to the preservation methods were also determined and analyzed in five probiotic products. Two samples of the 85 health functional food products had lactic acid bacteria at lower levels than the marked amount required to meet Korean food standards, whereas the 35 processed products were all suitable for distribution. The averages for probiotic contents, pH, and acidity were $1.2{\times}10^{10}CFU/g$, 5.35, and 1.29%, respectively. The average count of lactic acid bacteria in the 17 samples with marked amount among the 35 processed foods was $5.8{\times}10^8CFU/g$. The effects of preservation temperature ($-20^{\circ}C$, $4^{\circ}C$, $20^{\circ}C$, and $40^{\circ}C$) and storage period (1, 3, and 6 months) on probiotic content, pH, and acidity were determined for 5 probiotic products. After 1 to 6 months, the average reduction in probiotic content was by 59%; the lowest reduction occurred at $4^{\circ}C$ and the highest reduction occurred at $40^{\circ}C$. In addition, 3 of the 5 products showed a rapid decrease in probiotic content by more than 70% at $40^{\circ}C$ after a storage period of 1 to 3 months. Therefore, from this study results, it is recommended that products containing lactic acid bacteria should be refrigerated and consumed shortly after purchase.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.595-604
• /
• 2018

In this study, in a bid to develop natural bioadhesives for paper craft, the hanji industry, and preserving cultural assets, complex polysaccharides were extracted from brown and red algae and used as an ingredient in adhesives. Brown algae include sea trumpet, kelp, sea oak, and sea mustard, whereas red algae include Pachymeniopsis elliptica agar-agar weed, Gloiopeltis tenax, and hunori. The polysaccharides were extracted after transforming them from non-aqueous Ca complexes contained in each of the brown and red algae into water-soluble polysaccharides containing alkali metals with a solubility level of 1. and extracted Subsequently, only the polysaccharides were extracted using alcohol precipitation. The adhesion tensile strengths of kelp, a brown algae, and Pachymeniopsis elliptica, a red algae, were 21.58 and 32.99 kgf, respectively. They thus demonstrated better adhesion than that of solid glue products such as water plants (18.45 kgf) and glue sticks (20.45 kgf). The extraction yield of these polysaccharides is supposed to be determined according to their extracted environments; however, no difference in adhesion strength was seen. Further, it was found that the shapes of polysaccharides were determined by their growing environment instead of extraction environment. Use of multi-step alcohol precipitation method during extraction enabled the removal of the constituents except protein and other polysaccharides, thereby demonstrating a stable outcome without cultivation of mold. Furthermore, there was no occurrence of mold even after production of the adhesives by the simple solution method, which demonstrates the adhesive's potential as an environment-friendly adhesive material.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.453-459
• /
• 2018

This study was performed to investigate the contamination levels of heavy metals (such as lead, cadmium, arsenic and mercury) and aflatoxin (such as $B_1$, $B_2$, $G_1$ and $G_2$) in commercial herbs for food and medicine. The concentrations of the heavy metals were measured by the ICP-MS and a mercury analyzer. The aflatoxins were analyzed by a HPLC-florescence coupled with photochemical derivatization. The detection ranges of the lead, cadmium, arsenic and mercury were found to be 0.006~4.088 mg/kg, 0.002~2.150 mg/kg, ND~0.610 mg/kg and ND~0.0139 mg/kg respectively. Among the total samples, the 3 samples (2.6%) were not suitable for the specification of cadmium by the MFDS (Ministry of Food and Drug Safety). The 13 samples of the total 117 samples were aflatoxin positive (11.1%). The amount of aflatoxin $G_1$ was $0.7834{\mu}g/kg$ in the Puerariae Radix and aflatoxin $G_2$ were $0.3517{\mu}g/kg$, $0.4881{\mu}g/kg$ in two samples of the Glycyrrhizae Radix et Rhizoma, respectively. The aflatoxins $B_2$ and $G_1$ were simultaneously detected in the 10 Angelicae Gigantis Radix. The detection ranges of aflatoxins $B_2$ and $G_1$ were $0.2324{\sim}1.0358{\mu}g/kg$ and $0.7552{\sim}1.6545{\mu}g/kg$ respectively in Angelicae Gigantis Radix. The results of the current study suggest that continuous monitoring is needed for the proactive management of commercial herbs for food and medicine safety.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.46-54
• /
• 2019

Experiments of local cooling and heating on crown and root zone of forcing cultivation of strawberry 'Seolhyang' using heat pump and root pruning before planting were conducted. During the daytime, the crown surface temperature of the crown local cooling treatment was maintained at $18{\sim}22^{\circ}C$. This is suitable for flower differentiation, while those of control and root zone local cooling treatment were above $30^{\circ}C$. Budding rate of first flower clusters and initial yields were in the order of crown local cooling, root zone local cooling and control in root pruning plantlet and non pruning plantlet, except for purchase plantlet. Those of root pruning plantlet were higher than those of non pruning plantlet. These trends were evident in the yield of the first flower cluster until February 14, 2018, and the effect of local cooling and root pruning decreased from March 9, 2018. The budding rates of the second flower cluster according to the local cooling and root pruning treatments were not noticeable compared to first flower cluster but showed the same tendency as that of first flower cluster. In the heating experiment, root zone local heating(root zone $20^{\circ}C$+inside greenhouse $5^{\circ}C$) and crown local heating(crown $20^{\circ}C$+inside greenhouse $5^{\circ}C$) saved 59% and 65% of heating fuel, respectively, compared to control(inside greenhouse $9^{\circ}C$). Considering the electric power consumption according to the heat pump operation, the heating costs were reduced by 55% and 61%, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2018

This study was conducted to develop the manufacturing method of biochar using pruned stems of pear tree and its application effect on the crop growth and soil physico-chemical properties. In this study, biochar derived from pruned stems of pear tree at heating temperature of $300^{\circ}C$, $500^{\circ}C$ and $700^{\circ}C$ in heating times of 2, 3 and 4 hours, were tested in the changes of their chemical properties during biochar processing. The pH, Exch. K, Exch. Mg and cation exchange capacity (CEC) increased as the pyrolysis temperature increased during the production of biochar, and the change of these properties rapidly occurred at $500^{\circ}C$. However, as the pyrolysis temperature increased, ash content increased and total carbon (T-C), yield decreased. And the change of the properties in response to the heating time was not shown. It was thought that it would be desirable to set the production conditions of biochar at $500^{\circ}C$ for 2 hours in consideration of the change of chemical properties and the ash content and yield. And also, were conducted the experiments to establish manufacturing method of farm-made biochar using drum biochar manufacturing machine and investigate the application effects of biochar on the cultivation of chinese cabbage and tomato. Application of biochar derived from pruned stems of pear tree could enhance pH, organic matter (OM), total carbon (T-C) of soil. On the other hand, soil electrical conductivity (EC), NO3-N were lowered compared to the control which has no application. The bulk density, porosity and aggregate formation of soil were improved by biochar application. The fresh matter yields of chinese cabbage and tomato were significantly increased in proportion to the application rate of biochar. This study demonstrated the effect of the biochar derived from agricultural byproduct to be as a low cost potential soil ameliorant by physico-chemical properties in eco-friendly greenhouse cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.70-88
• /
• 2019

A statistical analysis of 4,380 non-glutinous landrace rice germplasm collected from four East Asian countries namely South Korea (1,032), North Korea (994), Japan (800), and China (528) was conducted using normal distribution, variability index value (VIV), analysis of variation (ANOVA), and Duncan's multiple range test (DMRT) based on a data obtained from Near-Infrared Reflectance Spectroscopy (NIRS) analysis. In normal distribution, the average protein content was 8.2%, and the non-glutinous rice amylose, ranging over 10%, was found to be 22.0%. Protein content in most gremplasm was between 5.4 and 10.9%, and amylose content was between 15.0 and 28.9%. The VIV was 0.50 for protein, and 0.81 for non-glutinous rice amylose content. The average amylose content was 23.34% in Chinese, 21.55% in South Korean, 21.45% in Japanese, and 20.48% in North Korean resources, while the average protein content was found to be 9.02% in Chinese, 8.06% in Japanese, 8.04% in North Korean, and 7.99% in South Korean resources. ANOVA of amylose and protein content showed significant differences at p=0.01. The F-test value for amylose content was 94.92, and for protein content was 81.82 compared to the critical value of 3.79. DMRT of amylose and protein content revealed significant differences (p<0.01). Among the various germplasm obtained from different countries, that from North Korean had the lowest level of amylose content, whereas that from South Korea had the lowest level of protein content than all other resources. Chinese resources had the highest level of amylose and protein content. It is recommended to use these results in breeding fields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.294-303
• /
• 2018

To set an optimal harvest time for five main whole-crop silage (WCS) rice cultivars, Nokyang (Ny), Mogwoo (Mw), Mogyang (My), Nokwoo (Nw) and Yeongwoo(Yw), based on feed value and dry matter yield, we analyzed water content (WC), feed values such as percent crude protein (CP), crude fat (CF), crude ash (CA), neutral detergent fiber (NDF), acid detergent fiber (ADF), estimated total digestible nutrients (TDN), and calculated their dry matter yield (DMY). These parameters were estimated at the booting stage and every 10 days from start of heading to 45 days after heading (DAH) to identify the optimal harvest time for these rice varieties. In all varieties, except Ny, the WC was about 65% on the $30^{th}$ DAH. In terms of WC, it is judged that there would be no major problem in preparing high quality silage when harvested between 20~30 DAH for Ny and about 30 days for the other cultivars. The CP and CA decreased significantly as the harvest time was delayed in all varieties (p<0.05). However, the CF in the tested varieties generally declined as DAH increased, and then increased again(p<0.05). The decrease in ADF and NDF was significantly different from the booting stage to 45 DAH in all varieties (p<0.05) and the estimated TDN increased gradually in all varieties as the harvest time was delayed. The TDN of all varieties, except Nw, was over 70% around 30 DAH. As harvest time was delayed, the DMY for all WCS rice increased significantly (p<0.05). The maximum DMY for each cultivar was observed at 45 DAH, however, no significant difference (p<0.05) was seen after 40 DAH for Ny and Yw, 30 DAH for Mw and Nw, and 20 DAH for My. Considering these results and others factors such as lodging, shattering, digestibility of grains, conversion of eating rice, etc., the optimal harvest time for silage use of all WCS rice tested was generally the yellow ripening stage, at about 30 DAH (30~40 DAH for Ny and Mw, and 30 DAH for My, Nw and Yw).

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.185-196
• /
• 2019

Abstract. This research was conducted to figure out the optimal size of the plug cell and seedling raising period in 'Nongwoo' and 'Nonghyeop' cultivars. In the first experiment on effect of plug cell size on growth of squash, seedlings were transplanted into hydroponic cultivation beds at different growing stages: Those in 32-cell trays with 3-4 true leaves at 25 days after sowing, those in 50-cell trays with 2 true leaves at 15 days after sowing, those in 105-cell trays just before a true leaf development, and those in 162-cell trays with only cotyledons at 8 days after sowing. In the second experiment on effect of seedling raising period on growth of squash, it was conducted to have different sowing dates. But the same transplanting date, based on the results of Experiment 1, and compared the differences in growth and fruit productivity as affected by plug cell size in the same way with experiment 1 including the cultivars and environmental conditions. After setting the transplanting date in advance, the number of days for sowing were calculated back for each treatment. In the first experiment, plant height was the greatest in 105-cell trays followed by 162, 50 and 32-cell trays in both cultivars. The best fruit quality was found in different treatments depending on the cultivars, although it was the lowest in 32-cell trays in both cultivars. The fruit quality was not significantly different among those from cell sizes. Therefore, when raising seedlings in 105-cell trays, the period of raising seedlings can be shortened as compared with the conventional 32-cell trays, and this change could reduce the workforce required for growing and transplanting seedlings. In the second experiment, after transplanting, shoot height and leaf width in the first measurement in both cultivars were greater in the 32-cell treatment. However, the last measurement after four weeks showed no significant difference in plant height, but significantly greatest leaf width in the smallest cell treatment, even as compared with that in 32-cell treatment. In case of 'Nongwoo', length and weight of the first harvested fruit showed the highest values in the treatment of 105-cell trays. In case of 'Nonghyeop' the 162-cell treatment along with the 105-cell treatment showed greatest length and weight of the first fruits. From these results, zucchini plug seedlings can be raised in plug trays with reduced cell sizes than the conventional 32-cell trays with improved fruit productivity.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.124-139
• /
• 2013

Choi Cheon-yak(about 1684~1755) is an artist who left the various artistic works such as sculptures of royal tombs, architectures. In addition, he was not only a skilled caster but also an able artisan carving jade in the early Joseon Dynasty period. Starting from making royal seals of King Suk-jong, he had made more than about 40 Royal seals until 1755. Choi Cheon-yak was well known as a skilled jade craftsman. Another of his great abilities was to carve subjects into ideal figures. In virtue of his greater abilities, he could take part in the process of constructing Royal tombs and sculpting the stone statues of military officials' which were erected at aristocrats' tombs. With these accumulated skills, when he was in charge of designing the folding screen stones for King In-jo's Jang Neong, he could even replace 12 animals system and clouds with peonies and lotus. Among his various abilities, his skill in carving a sculpture can stand comparison with any other contemporaries. His sculpture skill was at its zenith in 1752, the stone statues of military officials' at the Ui soseson's tomb count his showpiece that describes a model at the age of his late teens and is a realistic and portrayal sculpture, which met the royal family's dignity. In the same year, the stone statues of military officials' constructed by Choi Cheon-yak was elected in front of the Jo Hyen-myeong's tomb(1690~1752). This masterpiece referred to the armor of those of King Gong-min Neong and newly added a helmet and the patterns of a tortoise shell. These patterns of a tortoise shell were passed down to Park Moon-su's tomb in 1756 and Queen Jeong-sung's Hong Neung by his colleagues : Kim Ha-jeong and Byeon Yi-jin etc. He was one of the greatest sculptors in the $18^{th}$ century. People in Joseon praised him highly for his imaginative work from an amorphous object. Especially, these stone statues of military at Jo Hyeonmyeong's tomb shows the proofs of his supreme artwork.