• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.745-756
• /
• 2013

The purpose of this study is to evaluate representativeness of fuel-based emission factors. Twelve light-duty diesel vehicles which meet Euro-3 to 5 legislative emission limits were selected for emission tests. Second-by-second modal emission rates of vehicles were measured on a standard laboratory chassis dynamometer system. An off-cycle driving cycle was developed as a representative Korean real-world on-road driving cycle. Fuel-based emission factors were developed for short trip segments that involved in the selected driving cycle. Each segment was defined to have unit travel distance, which is 1 km, and characterized by its average speed and Relative Positive Acceleration (RPA). Fuel-based $NO_x$ emission factors demonstrate relatively good representativeness in terms of vehicle operation conditions. $NO_x$ emission factors are estimated to be within ${\pm}20%$ of area-wide emission factor under more than 40% of total driving situations. This result implies that the fuel-based $NO_x$ emission factor could be practically implemented into the on-road emission management strategies, such as a remote sensing device (RSD). High emitting vehicles as well as high emitting operating conditions heavily affect on the mean values and distributions of CO and THC emission factors. Few high emitting conditions are pulling up the mean value and biasing the distributions, which weaken representativeness of fuel-based CO and THC emission factors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.279-287
• /
• 2012

Recharging battery in electric vehicle takes a quite long time compared with gasoline and diesel vehicle which is a problem, the industries should solve, to introduce the electric vehicle into the market. For this reason, the institutions are suggesting a method replacing the discharged battery to recharged battery which is recharged in the switching center. However, this technology is still required to make clear the controversial issues such as threats to security and identification of users. In this paper, we explore the factors that threats to securities in battery exchange system and define the security requirements of the battery exchange system to solve suggested issues. The results of the research are expected to be the reference in the other studies of electric vehicle field of the commercialization of the battery recharging methods and analysis of the securities.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.9-14
• /
• 2011

Heavy duty diesel engine has relatively small portion of whole vehicles due to long drive distance and large engine displacement, but largely influences atmosphere environment. City buses changed to CNG (Compressed Natural Gas) bus with Korea-Japan Worldcup. Heavy duty truck and intercity bus, however, were impossible to use CNG because those kinds of vehicles had long drive distance and CNG station was installed mainly at the around of the bus garage of city. Insulation container storing the natural gas as a liquid makes heavy duty truck and intercity bus possible to use the natural gas. Drive using diesel is possible where is hard to recharge the gas. With LNG (Liquefied Natural Gas), the dependence on oil is largely decreased, PM (Particulate Matter) and NOx which is chronic disadvantage of diesel is remarkably reduced and finally $CO_2$, the representative green house gas, is reduced over 10%.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2017

Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.411-418
• /
• 2019

In this study, to investigate the effect of physical and chemical properties of butanol on the engine performance and combustion characteristics, the coefficient of variations of IMEP (indicated mean effective pressure) and fuel conversion efficiency were obtained by measuring the combustion pressure and the fuel consumption quantity according to the engine load and the mixing ratio of diesel oil and butanol. In addition, the combustion pressure was analyzed to obtain the pressure increasing rate and heat release rate, and then the combustion temperature was calculated using a single zone combustion model. The experimental and analysis results of butanol blending oil were compared with the those of diesel oil under the similar operation conditions to determine the performance of the engine and combustion characteristics. As a result, the combustion stabilities of D.O. and butanol blending oil were good in this experimental range, and the indicated fuel conversion efficiency of butanol blending oil was slightly higher at low load but that of D.O. was higher above medium load. The premixed combustion period of D.O. was almost constant regardless of the load. As the load was lower and the butanol blending ratio was higher, the premixed combustion period of butanol blending oil was longer and the premixed combustion period was almost constant at high load regardless of butanol blending ratio. The average heat release rate was higher with increasing loads; especially as butanol blending ratio was increased at high load, the average heat release rate of butanol blending oil was higher than that of D.O. In addition, the calculated maximum. combustion temperature of butanol blending oil was higher than that of D.O. at all loads.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.257-263
• /
• 2012

Biodiesel is a renewable energy which is nontoxic and acting as a replacement for conventional diesel which derived from fossil fuel. Classified biodiesel producing way such as acid, base, supercritical and enzyme methods, this study focused on eco-friendly production of biodiesel using supercritical and immobilized enzyme process. Assuming a plant with a production rate of 10,000 tons a year, a PRO II simulator program was used to simulate the product conversion rate and total energy consumption. The product conversion in supercritical process and immobilized enzyme was found to be 91.17% (including 0.9% glycerol) and 93.18% (including 1.0% glycerol) respectively. The result shows that the efficiency of immobilized enzyme process is higher compared to supercritical process but having lower end product purity. From the energy consumption point of view, supercritical process consume about 8.9 MW while immobilized enzyme process consume much lower energy which is 3.9 MW. Consequently, this study certifies that energy consumption of supercritical process is 2.3 times higher than immobilized enzyme process.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.599-612
• /
• 2015

The development of renewable energy technologies that can replace fossil fuels is environmentally important; however, such technologies must be economically feasible. Economic analyses are important for assessing new projects such as geothermal heating-cooling systems, given their large initial costs. This study analyzed the economics and carbon dioxide emissions of: a SCW (standing column well), a vertical closed loop boiler, a gas boiler, and an oil boiler. Life cycle cost analysis showed that the SCW geothermal heating-cooling system had the highest economic feasibility, as it had the highest cost saving and also the lowest carbon dioxide emissions. Overall, it appears that geothermal systems can save money when applied to large-scale controlled agriculture complexes and reclaimed land.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.249.2-249.2
• /
• 2010

최근의 고유가와 환경오염에 대한 대응 수단으로 수송용 바이오연료의 보급에 대한 관심이 세계적으로 높아지고 있다. 이 중 바이오디젤은 동식물성 기름으로부터 메탄올과의 전이에스테르화 반응에 의해 생산되는 경유대체 연료로서 환경 친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있다. 바이오디젤의 생산량이 증가함에 따라 대두유, 유채유, 팜유 등의 원료유 가격 상승 및 수급 불안정 문제가 대두되고 있으며 식량자원과의 충돌 문제도 발생되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)을 이용한 공정 개발 연구가 활발히 진행되고 있다. 본 연구에서는 비활용되고 있는 해외 열대작물 열매씨앗에서 착유한 식물성 오일의 바이오디젤 원료유로서의 사용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인, 유리지방산 함량이 대두원유보다 매우 높게 나타났다. 오일 중의 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하여 공정 효율을 감소시키고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산수율을 감소시키는 문제를 일으킨다. 고형물과 수분은 여과와 감압증발에 의해 쉽게 제거가 가능하였다. 15~20%의 유리지방산 함유 열대작물 오일의 전처리를 위해 균질계 산촉매와 비균질 고체 산촉매를 이용해 에스테르화 반응 효율을 조사한 결과 황산이 가장 높은 효율을 보였다. 반응표면분석법(Response Surface Method, RSM)을 적용해 메탄올과 촉매량의 2변수 에스테르화반응 최적화를 수행한 결과 메탄올 26%, 촉매 0.98%로 최적 조건이 도출되었으며 초기 산가 33mgKOH/g에서 0.98mgKOH/g으로 감소됨을 확인하였다. 전처리 정제한 오일의 물성분석 결과 고형물 0.1%, 수분 0.10%, 산가 1.0mgKOH/g, 인함량 20ppm 이하로 바람직한 원료유가 생산됨을 알 수 있었다. 제조된 원료유를 이용해 전이에스테르화 반응 최적화 실험을 RSM에 근거하여 진행한 결과 KOH 0.8%, 메탄올:오일 몰비 6.2:1, 반응온도 $60^{\circ}C$, 교반속도 200rpm, 반응시간 30분으로 나타났으며 증류 정제전 97.3%, 증류후 100.0%의 바이오디젤을 생산 할 수 있었다. 열대작물 오일의 전처리 공정은 메탄올을 과잉양으로 사용함으로 효과적인 알콜 회수 공정이 중요하다. 전처리 후 층분리를 통해 회수되는 메탄올 중의 수분함량은 2%~7%로서 이를 전처리 반응에 재사용하기 위해서는 0.3%이하의 수분함량으로 정제가 필요하다. 본 연구에서는 고가의 증류탑 형태가 아닌 단증류방식으로 2단계 내지 3단계로 0.3% 수분의 메탄올 회수 조건을 도출하였으며 파일롯 공정 설계를 진행하고 있다. 이로서 본 연구의 열대작물 오일은 저가로 충분한 물량의 확보가 가능하다면 바이오디젤 원료 자원으로서 큰 활용가치가 있는 것으로 판단된다.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.37-45
• /
• 2006

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one or important issue in recycling methods. This study was introduced over the trend or generation of plastic waste, in Korea pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy research). The characteristics of process developed in KIER are the continuous loading treatment or mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about $81\;wt\%$ liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.34-46
• /
• 2005

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one of important issue in recycling methods. This study was introduced over the trend of generation of plastic waste, pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy Research). The characteristics of process developed in KIER are the continuous loading treatment of mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about 81 wt% liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.