• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.301-305
• /
• 1995

This study was conducted to find out the changes of soil physical properties and rice growth by the different soil prepartion, such as direct seeding in dry or submerged condition, tillage or no-tillage, and transplanting the infant seedlings. Soil bulk density and hardness were higher in no-tillage plots than tillage plots, and in dry-seeding plots than submerged seeding plots. Permeability of no-tillage plot was increased 56% and water requirement was also increased 27% compare to the conventional transplanting condition. In no-tillage plot, the soil water contents were so rapidly decreased that easily changed to optimum condition for machinery working. The root growth of rice was inhibited as increasing the soil bulk density at early stage, bottom of culm in no-tillage submerged plot was located 0.9cm above the soil surface and the rice plant slightly lodged. The root distribution of surface layer was higher in no-tillage plot and the heading date was 2 days earlier in no-tillage plots than tillage plots, and 3 days earlier in dry seeding plot than submerged seeding plot. Rice yields of no-tillage plots were 5.55 M/T/ha and 5.16 M/T/ha for dry and submerged seeding respectively. These yields were lower about 12.1 % in dry seeding and 18.3% in submerged seeding compare with 6.31M/T/ha of transplanting plot. Rice yields were higher at dry seeding than submerged seeding in no-tillage condition, but in tillage condition, the rice yields were better at submerged seeding plot than dry one.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.128-134
• /
• 2002

당근 수확작업에 대한 기계화 요구도가 높은 반면에 아직까지 수확작업의 기계화는 그다지 진전되지 못하고 있는 실정이다. 지금까지의 당근 등 근채류의 수확작업은 경운기용 또는 트랙터용 굴취기를 이용하여 작물을 지상위로 노출시키고 인력으로 수집하는 방법이 대부분이며 흙이나 돌 등 협잡물의 선별은 곤란하다. 또한 줄기절단 등 수확 후처리 작업이 기계화되지 못해 노동부담이 크다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.16-16
• /
• 2017

국내 농업인구 감소 대비 식품소비량이 증가함에 따라 농가의 인력을 대체하고 다양한 작업이 가능하며 가격이 저렴한 국내 기계화 기술이 필요하다. 무동력 디스크해로우 작업기는 경운과 배토가 가능한 복합작업기로서 작업기를 구성하는 주요 구성품들은 필드작업에 의해 발생되는 하중에 구조적 강도와 신뢰성이 충분히 확보되어야 한다. 또한, 실제로 필드 작업 시 작업기에 걸리는 하중은 복합하중 형태로 전달되기 때문에 단순한 형태 하중에 비해 하중계측에 어려운 점이 있으므로 하중계측점의 선정이 매우 중요하다. 본 논문에서는 하중계측점을 선정하기 위하여 복합기의 주요 구성품인 치즐(chisel) 및 디스크해로우암(disk harrow arm)에 대하여 구조해석을 수행하였으며, 3축 방향의 단위하중 응력 계산결과로부터 load reconstruction을 위한 스트레인 게이지 위치를 선정하였다. 또한, 스트레인 게이지의 신호가 하중해석에 적절한 값이 되도록 기존의 형상을 수정하였다.

• Korean Journal of Agricultural Science
• /
• v.29 no.2
• /
• pp.67-77
• /
• 2002

This study aims at investigating the realities of tractor rotary tilling and paving operations performed by farm families in the central part of the country, measuring the power requirement so as to find the energy-saving factors for tractor rotary tilling, and designing a device to prevent soil adherence to the inside of the rotary cover-this part is the most subject to soil adherence and affects the power requirement. As a result of rotary tilling tests using rotaries equipped with a soil adherence preventer, the power requirement values were measured to be 52.18, 52.44, 49.01 and 46.34 PS for general, stainless steel, rubber and PE rotaries, and as a results of measurement of the quantities of the soil adhered to rotaries after their tilling tests, on the average, the quantities were measured to be 5.6, 5.7, 3.1 and 2.7kg for general, stainless steel, rubber and PE rotaries, respectively. The PE rotary cover reduced the power requirement and soil adherence by 11 and 52%, respectively.

• Korean Journal of Organic Agriculture
• /
• v.20 no.4
• /
• pp.503-518
• /
• 2012

Korean type of no-tillage cultivation method which was applied on this study used the ridge and the furrow and constantly recycling them as it was suitable for Korea's weather and farming conditions. This no-tillage cultivation was reported to have little negative impact such as reduction of production (Kwon et al., 1997). In addition, it was found to have a lot of benefits as it requires less agro-materials and energy costs as well as shortened working hours because tillage operation is not needed. (Yang et al., 2012). According to an analysis, no-tillage cultivation can reduce greenhouse gas emissions by $344.7kgCO^2$ (58%) in every 10a ($1,000m^2$) compared to ordinary pepper farming technique (Korea averages). Direct-indirect reduction effects from using fertilizer and using less amount of energy were 92% and 44% respectively both of which can be considered very high. Besides the direct effects of no-tillage cultivation, soil management using no-tillage technique raises carbon sequestration effect on soil as time goes on (West & Marland, 2002), that is why the technique is expected to have constant carbon emission reduction effect. For theses reasons, distribution and expansion of Korean type no-tillage cultivation are expected to play a role as major agro-green technologies for achieving our goal of reducing greenhouse gas emissions in agricultural sector.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.79-82
• /
• 2019

본 논문은 VR을 기반으로 하여 별도의 장갑이나 핸드헬드 디바이스 없이 치매 예방과 재활치료를 위한 VR을 이용함으로써 사용자의 두뇌 사용능력과 신체 활동성을 증가시켜 치매예방과 재활치료 효과를 향상시킬 수 있도록 하였다. 치매 예방 콘텐츠로는 치매의 대표적인 원인인 뇌세포의 퇴화에 초점을 맞춰 기억력, 논리력, 산술능력, 공간인지능력 등을 훈련할 수 있도록 구성하고, 노인을 위한 재활치료 콘텐츠로는 상지훈련, 하지훈련, 정신훈련, 밸런스훈련 등에 효과적이도록 구성하였다. 1:N 방식의 그룹훈련으로 고도화하여 다수의 사용자 또는 그룹이 작업치료사 한 명의 통제를 받아 치매예방 및 인지훈련이 가능한 시스템 개발하고 공공보건의료시설, 요양원, 재활의학과 보유병원 등에서 이용할 수 있다.

• Journal of Biosystems Engineering
• /
• v.16 no.4
• /
• pp.384-398
• /
• 1991

A computer program was developed to select the optimum size of farm machine and analyze its operation costs according to various farming conditions. It was written in FORTRAN 77 and BASIC languages and can be run on any personal computer having Korean Standard Complete Type and Korean Language Code. The program was developed as a user-friendly type so that users can carry out easily the costs analysis for the whole farm work or respective operation in rice production, and for plowing, rotarying and pest controlling in upland. The program can analyze simultaneously three different machines in plowing & rotarying and two machines in transplanting, pest controlling and harvesting operations. The input data are the sizes of arable lands, possible working days and number of laborers during the opimum working period, and custom rates varying depending on regions and individual farming conditions. We can find out the results such as the selected optimum combination farm machines, the overs and shorts of working days relative to the planned working period, capacities of the machines, break-even points by custom rate, fixed costs for a month, and utilization costs in a hectare.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.359-365
• /
• 2019

This paper is a basic study for the performance evaluation, durability improvement and optimal design of tractor transmission. The engine torque of the 78 kW agricultural tractor during rotary tillage was measured using CAN communication. It was calculated with equivalent torque and then analyzed. In order to develop a reliable tractor, it is important to convert measured torque in various agricultural operations into equivalent torque and analyze it. The equivalent torque was calculated using Palmgren-Miner's rule, which is a representative cumulative damage law. The equivalent torque of rotary tillage period and steering period are 229.2 and 136.7 Nm, respectively. The maximum and average torque during rotary tillage period are 336.0 and 234.4 Nm, respectively. The maximum and average torque of the steering period are 288.0 and 134.6 Nm, respectively. The engine torque in rotary tillage period is higher than in the steering period because of cultivation of soil through PTO. The maximum and rated torque of engine are 387.0 and 323.0 Nm, respectively, which are 183% and 136% higher than the equivalent torque during rotary tillage and of steering section. Because transmission of agricultural tractor in Korea companies is generally designed by the rated torque of engine, there is a difference from measured torque during agricultural operations. Therefore, it is necessary to consider it for optimal design.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.134-141
• /
• 2005

Cultivation of winter cover crops and its soil utilization for summer main crops in slope upland is very important at the respects of diminution of soil erosion and non-point pollution source. The effects of cover crop, hairy vetch as no-tillage or conventional tillage on prevention of soil erosion and reduction of chemical nitrogen fertilization were investigated in the slope upland with whiter clover living mulch (partial tillage) in Suwon for three years and with rye (conventional tillage) in Hongcheon for two years, respectively. In Suwon, amounts of soil lost by rainfall runoff decreased as much as 90% by hairy vetch-no tillage (HV-NT), white clover-partial tillage (WF-PT) together with the decrease of rainfall runoff compared to winter fallow with conventional tillage (WF-CT). In addition, amounts of weed also decreased as much as 80-90% by HV-NT and WF-PT. Corn yield decreased much at the plot of WF-PT mainly due to competition for soil water and nutrients between clover and corn at the early corn growth stage. On the contrary, corn yield increased by HV-NT compared to WF-CT regardless of weed control. In Hongcheon, amounts of soil eroded during winter season before corn seeding were reduced as much as 95% by cultivation of hairy vetch and rye compared to winter fallow. Amount of soil eroded during waxy corn growing season was reduced as much as 98% by HV-NT compared to WF-CT. Also, soil incorporation of hairy vetch and rye as green manure with conventional tillage at corn seeding time could reduce soil erosion as much as 70% compared to no soil cover with conventional tillage. Ear yields of waxy corn were increased 10% higher at hairy vetch green manure (HV-CT) without nitrogen fertilizer, 20% higher at HV-NT with standard nitrogen fertilizer, respectively than WF-CT. But ear yields of waxy corn were decreased by rye green manure (R-CT) and HV-NT at the condition of no nitrogen fertilizer. It was concluded that hairy vetch was better as winter cover crop to reduce both soil erosion and chemical nitrogen fertilizer simultaneously in slope upland than other cover crops.