• 한국작물학회지
• /
• 제55권1호
• /
• pp.8-13
• /
• 2010

자운영 재배농가에 자운영 안정적 입모확보에 기초자료를 얻고자 자운영 지속재배와 매년파종시 입모 및 생육특성을 조사한 결과는 다음과 같다. 1. 자운영 지속재배포장에서 가을철 토양 속 자운영 종자는 이앙전 로타리는 토양표면에서 15 cm깊이까지 고루 분포한 반면, 부분경운 이앙시는 주로 10 cm깊이 이하에서 대부분 분포하였다. 2. 자운영 지속재배시 출아깊이는 부분경운 이앙시 1~3 cm. 로터리경운 이앙시 1~5 cm에서 출아가 되었다. 3. 자운영 지속재배는 표면에서 출아하는 매년파종 자운영보다 월동전 뿌리 길이가 깊어 월동율이 높고 논 정지 작업시 종자가 토양과 고루 혼합이 되어 입모균일도가 10.6~11.7% 가량 높아 입모수 확보가 유리하였다. 4. 자운영 지속재배시 건물생산성은 수분부족 및 저온 등기상환경이 불량 할 경우 매년파종보다 건물생산성은 높았으나 환경조건이 양호할 경우는 크게 차이가 없었다.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.344-350
• /
• 1993

The purpose of this study is to develop design equations to calculate optimum specifications and dimensions such as weight, engine horsepower, etc. of the tractor necessary to perform stable rotary tillage. The main results of this study are as follows. 1. A wheel-lug ought to receive a special resistance in downward direction which resists the lug's upward motion on wet sticky soil surface. The authors introduce a new academic name of the "lift resistance(上昇抵抗力, 상승저항력)" for such a force which resists retraction of a wheel lug from the soil in the upward trochoidal motion. This force is composed of the frictional force acting on the trailing and the leading lug side, and the "perpendicular adhesion(鉛直付着力, 연직부착력)" acting on the lug face and the undertread face on adhesive soil. 2. The "lift resistance ratio(上昇抵抗力係數, 상승저항력계수)" and the "perpendicular adhesion ratio(鉛直付着力係數, 연직부착력계수)" were defined, which are something similar to the definition of the motion resistance ratio, the traction coefficient, etc. 3. The design equation of the optimum weight of a rotary tiller mounted on the tractor derived by calaulating the forces acting on the rotary blades. 4. The design equations to calculate optimum specifications and dimensions such as weight, engine horsepower, etc. of the tractor necessary to perform stable rotary tillage were derived. It becomes clear that the optimum weight of a rotary tiller and a tractor can be estimated in planning design by means of putting about 21 design factors of the target into the equation. These equations are useful for planning design to estimate the optimum dimensions and specifications of a rotary tiller as well as a tractor by the use of known and/or unknown design parameters.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• Journal of Biosystems Engineering
• /
• 제32권4호
• /
• pp.215-222
• /
• 2007

In the study, the cone index, the cohesion and the internal friction angle of soil were measured before and after tillage in order to suggest relative improvement in soil properties by comparing the two measured values before and after tillage. The tillage methods tested in the study were five combinations of plowing and rotovating; one plow tillage operation, one plow followed by one rotary, one plow followed by two rotary, one rotary without plow and two rotary without plow. The experiments were performed in a soil bin in Sunggyunkwan Univ. and in four selected test fields in Yeoju, Seodun-Dong, Suwon (especially, two different fields) and Chungju. In general, the internal friction angle and cohesion of soil increased with the increase of soil compaction. After applying the tillage operations, the internal friction angle reduced by 14 degree and the cohesion decreased up to about $2.2N/cm^2$ on the soil bin in comparison with those before tillage. The two values, however, reduced by 9 degree and up to about $1.0N/cm^2$ on the tested fields. The CIs for all the tillage operations on the soil bin and on 4 different test fields were decreased by 800 kPa in comparison with those before tillage. The best combination of tillage operations for decreasing the CIs of soil was one plow operation followed by one rotary. The CIs for one plow operation followed by two rotary were slightly higher than that for one plow operation followed by one rotary because one plow operation followed by two rotary crushed down the soil excessively, so that the porosity of soil decreased.

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.137-145
• /
• 2022

Objectives: This study aimed to identify PM₁₀ mass concentration levels and conduct peak identification during five tasks in agricultural works. Methods: We investigated five agricultural tasks in 12 farms, which were harvesting, plowing, sowing, planting, and decapitation. All samples were measured by using the portable aerosol spectrometer(PAS 1.108) and the aerosol monitor(SidePak AM520). The collected data were compared with the national PM₁₀ concentrations. They were calculated to descriptive statistics, independent t-test, or ANOVA, and the peak identification on time series graph. Results: The ten investigated farms showed no significant difference with the national PM₁₀ concentrations, but the two greenhouses(AM, 143.31, 85.16 ㎍/m³) showed significant difference(p<0.05). As a result of the peak identification, the harvesting tasks showed repeated peak occurrence with the background concentration level of about 50 ㎍/m³. For plowing and sowing tasks, the peak occurred intermittently when the working was conducted near the sampling sites. Among the five tasks, the arithmetic mean of the harvesting task was 138.84±294.71 ㎍/m³, which was significantly higher than the other tasks(p<0.05). In addition, the case of using a tractor was higher than the case of not using the tractor(p<0.05), and the driver's seat showed the highest concentration(AM, 95.81 ㎍/m³). Conclusions: Works in greenhouses might have exposure to PM₁₀, while outdoor works is similar to general atmospheric PM₁₀ concentration levels. However, there is a possibility of intermittent exposure to high concentrations of PM₁₀ depending on the characteristics of agricultural tasks.

• 대한통합의학회지
• /
• 제10권4호
• /
• pp.83-91
• /
• 2022

Purpose: The goal of this study was to investigate changes in dual-task performance according to age and difficulty of cognitive tasks for the in community-dwelling elderly populations, as well as to examine their changes in hand dexterity according to age and cognitive function. Methods: A total of 135 people aged 65 years old and over participated in the study. To evaluate each participant's dual-task performance, each participant completed a dual task. To assess their cognitive function, the Korean Mini-Mental State Examination (MMSE-K) and the Korean version of Montreal Cognitive Assessment (MoCA-K) were the tools used. Participants were divided into three groups based on their age: 65-69 years, 70-79 years, and 80-89 years. Results: The findings showed that age groups and the difficulty of the cognitive task significantly affected the amount of time required for dual-task performance (p<.001). Additionally, the dual-task correct response rate (CRR) decreased significantly with age groups and the difficulty of the cognitive task (p<.001). The amount of time required for finger dexterity performance increased significantly with age groups (mean score±standard deviation [SD]; 19.46±2.26 in subjects aged 65-69 years; 21.92±2.61 in subjects aged 70-79 years; and 23.82±2.92 in subjects aged 80-89 years; p<.001). Moreover, as a result of the correlation between hand dexterity and cognitive function, MoCA-K was -0.563 and MMSE-K was -.412, showing a statistically significant correlation (p<.001). Conclusions: Age and the difficulty of the cognitive task affect the community-dwelling elderly populations in terms of dual-task performance and dual-task CRR. In addition, aging and general cognition have an impact on hand dexterity. Based on the results of this study, it is anticipated that the results will serve as a reference for domestic clinical trials that confirm cognitive decline in the elderly using dual task and hand dexterity evaluation.

• 대한통합의학회지
• /
• 제11권3호
• /
• pp.49-57
• /
• 2023

Purpose : This study aimed to systematically review the correlation between hand dexterity and cognitive function in the elderly, and summarize various evaluation tests and results analysis methods for manual dexterity tests applied to this population. Methods : We searched published studies in the Korean Studies Information Service System and PubMed databases from January 2013 to March 2023. The main keywords used were "dexterity," "fine motor," "elderly," "cognitive function," and "correlation." A total of 10 studies were selected for analysis from the 1,524 searched articles. The included studies consisted of a cohort study, a longitudinal study, and eight cross-sectional studies which were analyzed for patients, intervention, comparison, and outcomes. Results : Analyzing the qualitative level of 10 studies, 8 articles (80%) were non-randomized two-group studies that provided level II evidence whereas the remaining 2 studies (20%) were non-randomized single-group studies (level III evidence). Therefore, these results indicated that the level of evidence in this field is generally high. The Purdue pegboard test was the most commonly used evaluation test for manual dexterity, and velocity speed was the most frequently employed analysis method. Results indicated that there were significant differences in manual dexterity test between the normal elderly, those with mild cognitive impairment, or dementia. Conclusions : These results can be used as a basis for selecting dexterity test evaluation items and methods to analyze it in the elderly while screening for cognitive impairment. In addition, this study highlights potential areas for future research on the development of manual dexterity evaluation tools and techniques for analysis and the need for more reliable and valid methods for assessing cognitive function in the elderly.

• 문화기술의 융합
• /
• 제9권2호
• /
• pp.575-580
• /
• 2023

본 논문에서는 농업용 방제 드론을 이용하여, 균일 방제를 통해 병해충에 농작물을 방지하고자 한다. 방제가 수행되는 비행 고도는 4 m 로 고정하고, 비행 속도 4-5 m/sec. 범위에서 실험을 수행하였다. 방제사의 조종 습관 및 방법, 바람의 영향과 같이 환경적 요인이 작용하여 정량화된 방제 작업이 어렵다. 실험은 10 m 농지에서 감수지를 한 열에 1.25 m 간격으로 7 장씩 5 열을 10 m 간격으로 배치하고, 제안된 항공 살포 시스템을 적용하여 살포 실험을 수행하였다. 분사 노즐 중심으로 좌우측 약 3.75 m 지점에서부터 분사된 입자가 감소하기 시작하였다. 입자의 개수에 따라 유효 살포 폭은 약 7.5 m 영역으로 관찰되었으며, 제안된 살포 시스템이 균일 방제에 효과가 있음을 실험적으로 검증하였다.

• 농업과학연구
• /
• 제5권2호
• /
• pp.149-157
• /
• 1978

동력경운기용(動力耕耘機用) 두류(豆類)의 무경운(無耕耘) 파종기(播種機)에 부착(附着)하여 사용(使用)하는 구절기중(溝切器中)에서 소요색인력(所要索引力)이 작고 구절작업정도(溝切作業精度)가 양호(良好)한 구절기(溝切器)의 개발(開發)을 위(爲)한 기초자료(基礎資料)를 얻기 위(爲)하여 구동식(驅動式) 토조(土槽)에 인공토양(人工土壤)을 채우고 원판형(圓板型) 및 호우형(型) 구절기(溝切器)의 소요색인력(所要索引力)과 이에 영향(影響)을 미치는 인자(因子)들과의 관계(關係)를 구명(究明)코자 실내모형(室內模型) 실험(實驗)을 실시(實施)하여 다음과 같은 결과(結果)를 얻었다. 원판형(圓板型) 구절기(溝切器)에 대(對)하여 직경별(直徑別)로 조립각(組立角)을 $8^{\circ}$와 $16^{\circ}$, 경심(耕深)을 3cm와 6cm로 변화(變化)시키년서 2.75cm/sec의 속도(速度)로 색인력(索引力)을 측정(測定)한 결과(結果) 원판(圓板)의 직경(直徑)이 약(約) 28cm인 경우(境遇)에 색인력(索引力)이 최소(最少)로 나타났고, 직경(直徑)이 이보다 크거나 작은때는 색인력(索引力)은 증가(增加)하는 경향(傾向)을 나타냈으며 비저항(比抵抗)도 대체(大體)로 비슷한 경향(傾向)이었으나 원판(圓板)의 직경(直徑)이 약(約) 30cm일 때 최소(最少)로 나타났다. 종자파종(種子播種)의 심도조절(深度調節)을 목적(目的)으로 작구심(作溝深)(3cm 및 6cm)과 색인력(索引力)과의 관계(關係)를 조사(調査)하였던 바, 경심(徑深)과 색인력(索引力)과의 관계(關係)는 거의 직선적(直線的)인 변화(變化)를 나타냈으며 색인력(索引力)에 영향(影響)을 미치는 인자중(因子中)에서 경심(耕深)의 영향(影響)이 가장 컸음을 알 수 있었다. 일반적(一般的)으로 조립각(組立角) 및 주행속도(走行速度)에 별(別) 영향(影響)없이 경심(耕深) 3cm 및 6cm 공(共)히 색인력(索引力)은 직경(直徑) 약(約) 28cm에서, 비저항(比抵抗)은 약(約) 30cm에서 최소(最少)의 값을 나타내었다. 파종기(播種機)의 작업성능(作業性能)과 관계(關係)가 갚은 주행속도(走行速度) 및 파건(播巾)의 조절(調節)을 목적(目的)으로 원판(圓板)의 조립각(組立角)과 주행속도(走行速度)가 색인력(索引力)에 미치는 영향(影響)을 조사(調査)했던 바, 조립각(組立角)과 주행속도(走行速度)가 증가(增加)함에 따라 모두 색인력(索引力)이 증가(增加)하는 경향(傾向)을 나타내었으나 색인력(索引力)에 미치는 영향(影響)은 주행속도(走行速度)가 더욱 크게 나타났다. 원판형(圓板型) 구절기(溝切器)와 호우형(型) 구절기(溝切器)를 비교(比較)하기 위(爲)하여 쐐기각(角)이 $16^{\circ}$이고 리프트각(角)이 $20^{\circ}$인 호우형(型) 구절기(溝切器)와 조건(條件)이 비슷한 조립각(組立角) $16^{\circ}$의 원판형(圓板型) 구절기(溝切器)의 색인특성(索引特性)을 비교(比較)한 결과(結果) 직경(直徑) 30cm인 원판형(圓板型)의 경우(境遇)는 비저항(比抵抗)이 $0.35{\sim}0.5kg/cm^2$인데 비(比)해 호우형(型)의 경우(境遇)는 $0.71{\sim}1.02kg/cm^2$로 나타나 호우형(型)의 색인비저항(索引比抵抗)이 평균(平均) 2배정도(倍程度) 크게 나타났고 작구상태(作溝狀態)도 원판형(圓板型)의 경우(境遇)보다 불량(不良)하였다.

• 한국작물학회지
• /
• 제24권3호
• /
• pp.35-42
• /
• 1979

조광을 답리작에 공시하여 휴립로타리 파종기계(동력경운기부착용)에 의한 파종작업의 성력화 정도와 이에 따른 적정파종량 및 시비량을 구명하였던 바 그 결과를 요약하면 다음과 같다. 1. 토양습윤정도에 따른 휴립로타리 파종기계 재배시험 가) 휴립로타리 파종기계를 이용할 경우 10a당 파종작업에 소요되는 노동시간은 건답상태에서는 72분(1977) 및 73분(1978) 소요되어 66% 및 77%의 성력효과가 있었다. 나) 반습답상태에서는 100분으로 비하여 83%의 절감효과를 보여 건답상태보다 성력효율이 높았다. 2. 휴립로타리 파종기계 재배시의 시비량대 파종량시험 가) 10a당 3요소를 12~8~8kg 시용한 구보다 증비구에서 월동율이 다소 양호하였으나 파종량 간에는 $30\ell$ /10a 구서 약간 불량한 것을 제외하면 일정한 경향이 없었다. 나) 도복 및 수병발생은 시비량이 많을수록 많았으며, 같은 시비량 조건에서는 파종량이 과다한 구에서 도복이 많은 경향을 보였다. 다) 유효경비율은 시비량 간에는 62~66%로 거의 차이가 없었으나 파종량 간에는 10a당 $10\ell$에서 $30\ell$로 증가됨에 따라 80%에서 53%까지 거의 직선적으로 감소되었다. 라) 풀수기의 엽면적지수는 표준비 6.7에 비하여 1.5배비 및 2배비는 9.3~9.4로 많았으며 파종량이 많을수록 커지는 경향을 보였다. 마) $\textrm{m}^2$당 수수는 시비량 및 파종량이 많을수록 뚜렷이 증가되었으나 1수립수는 파종량이 많은 구에서 다소 감소하였다. 1수립수는 파종량이 많은 구에서 다소 감소하였다. 천립중은 이와 반대로 2배비 < 1.5배비=표준비, 10=15=20 < 25=30$\ell$의 경향을 나타내었다. 바) 답리작에서 휴립로타리 파종기를 이용할 경우, 일정 면적당 수수를 확보하기 위한 과정파종량은 표준비시는 10a당, 20l내외, 1.5배비 및 2배비시는 $15\ell$내외이며, 시비량은 증수 및 안전재배면을 고려하여 18~12~12kg로 시용하는 것이 적당할 것으로 사료된다.