• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.71-76
• /
• 1999

우리나라의 마늘ㆍ양파의 재배면적은 '98년 현재 37,337㏊, 14,806㏊이고 생산량은 각각 39만여톤, 87만여톤으로 밭작물 중에서 큰 비중을 차지하고 있으나 수확작업의 대부분이 인력에 의하여 이루어지고 있기 때문에 생산비가 높고 수입품과의 가격차이가 심하여 재배농가에 큰 부담이 되고 있다. 한편 마늘ㆍ양파의 기계화작업이라야 경운정지, 방제, 비닐피복 등에 그치고 있고 일부지역에서 마늘 수확시 굴취기를 사용하고 있는 실정이다. 더욱이 논에서 마늘ㆍ양파를 재배할 경우 수확시기와 벼농사의 이앙시기가 이어지기 때문에 적기에 빠른 수확이 가능한 수확기의 개발이 요구되고 있다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.77-77
• /
• 2017

현재 국내의 경우 4륜 승용관리기가 개발되었으나 성능 미비와 편이성 부족으로 승용관리기 및 부속 작업기 보급이 매우 저조한 상태이다. 3륜 승용관리기는 작업기 복부 장착으로 작업의 정밀도, 편이성, 관측의 용이성 향상과 함께 지상고 제고, 차폭 조절, 조향 등의 성능 개선을 기할 수 있다. 국내에서는 3륜 승용관리기용 복부 장착 부속작업기가 거의 개발되어 있지 않으며, 특히 두류 재배에 있어서 일관기계화 작업을 위한 관리작업기의 개발은 매우 필요한 실정이다. 승용관리기에 의한 중경제초는 잡초방제는 물론 물 빠짐과 토양 속 통기가 좋아지고, 지온 조절, 쓰러짐 방지, 부정근 발생을 조장하여 콩의 생육과 결실을 좋게 함으로써 수량이 증가되는 효과가 있다. 따라서 본 연구는 3륜 승용관리기에 적합한 복부장착형의 중경제초기를 설계 제작하였다. 3륜 승용관리기용 중경제초기는 승용관리기의 복부 PTO에서의 구동력 전달을 위한 연결 조인트, 중간축, 기어 및 체인 전동기구, 구동축으로 구성된 동력전달부, 중경제초를 위한 5개의 로타리 날과 후방 1개의 제초날로 구성된 3조의 작업날, 경심 조절을 위한 바퀴, 다양한 조간거리에 적응을 위한 조간조정 나사부, 흙의 비산 방지를 위한 로타리 날 커버 및 케이스, 3륜 승용관리기에의 부착을 위한 프레임 및 부착보조 작업기 이동용 바퀴장치 등으로 구성 설계 제작하였다. 로타리 날은 기존 시판 관리기용 로타리 중경 날을 사용하였는데 진행방향에 역으로 회전하도록 하였고, 날의 회전반경은 약 330 mm, 조당 경운 폭은 약 250 mm, 최대 경심 100 mm로 설계하였다. 조간거리의 조절범위는 수동나사에 의하여 620~900 mm 범위로 무단조절 할 수 있도록 하였다. 중경제초기는 3륜 승용 관리기 복부의 평행링크에 부착되므로 작업기의 이동 및 부착 편이성을 위하여 이동용 바퀴를 설치하였다. 제작된 중경제초기의 크기는 길이${\times}$폭${\times}$높이가 $660{\times}2072{\times}880mm$, 중량은 약 200 kg으로 제작되었다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.359-365
• /
• 2019

This paper is a basic study for the performance evaluation, durability improvement and optimal design of tractor transmission. The engine torque of the 78 kW agricultural tractor during rotary tillage was measured using CAN communication. It was calculated with equivalent torque and then analyzed. In order to develop a reliable tractor, it is important to convert measured torque in various agricultural operations into equivalent torque and analyze it. The equivalent torque was calculated using Palmgren-Miner's rule, which is a representative cumulative damage law. The equivalent torque of rotary tillage period and steering period are 229.2 and 136.7 Nm, respectively. The maximum and average torque during rotary tillage period are 336.0 and 234.4 Nm, respectively. The maximum and average torque of the steering period are 288.0 and 134.6 Nm, respectively. The engine torque in rotary tillage period is higher than in the steering period because of cultivation of soil through PTO. The maximum and rated torque of engine are 387.0 and 323.0 Nm, respectively, which are 183% and 136% higher than the equivalent torque during rotary tillage and of steering section. Because transmission of agricultural tractor in Korea companies is generally designed by the rated torque of engine, there is a difference from measured torque during agricultural operations. Therefore, it is necessary to consider it for optimal design.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.96-101
• /
• 2002

노지고추는 2000년 재배면적이 75천㏊로 전체 채소재배면적의 19%를 차지하고 있으며, 주곡 다음으로 중요한 경제작물이다. 고추는 1970년 중반부터 재배면적이 계속적으로 증가하는 추세였으나 최근에는 외국산 고추의 수입여파로 재배면적이 감소하고 있는 실정이다. 2000년 고추재배 평균 노동투하시간은 10a당 195.7시간으로 이중 경운ㆍ정지, 휴립ㆍ피복, 방제작업 등을 제외한 대부분의 농작업은 인력에 의존하고 있어 노력을 절감하고 생산비를 줄일 수 있는 기계화가 절실하다. (중략)

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.15-27
• /
• 1981

In order to investigate on the field performance of 3.5PS power tiller and to obtain the optimum using conditions of it, this experiment has been carried on the plowing operation, the rotary harrowing operation and the ridging operation that compared 3.5PS power tiller(KC-450) with the existing 5PS(DT-40) and 8PS(DT-85) power tiller. It has been performed at Suck Jung-Dong, Ansung Country, from March to October in 1980. The results of this field test were obtained as follows; 1. The plowing performance of KC-450 tiller was found to be 125min/10a that was lower than that of DT-85 tiller by 26min/10a in the effective plowing speed 0.9m/sec. 2. The field efficiency of KC-450 tiller was the highest among the power tillers as to be 82 persent that was higher than that of DT-85 tiller by 5 persent in the effective plowing speed 1m/sec. 3. The rotary harrowing performances of DT-40 tiller and DT-85 tiller were higher than that of KC-450 tiller in the rotary harrowing operation of the same speed, and the field efficiency of KC-450 tiller and DT-40 tiller were higher than that of DT-85 tiller in the rotary harrowing operation. 4. The ridging Performance of testing power tillers were nearly equality in the ridging operation of the same speed, and the field efficiency of testing tillers were higher KC-450 tiller than DT-40 tiller, DT-40 tiller than DT-85 tiller. 5. The work performance of power tiller increased with increase in the size of field area. Work performance and field efficiency of KC-450 tiller were higher than other tillers below 8a in field size 6. DT -85 tiller was more useful in deep plowing depth. But below 8a in field size KC-450 tiller was more easily operated and its field efficiency was higher 7. KC-450 tiller should be more useful to operate in the small size field or in the small scale farming and for the cultivation of vegetables, gardening plants, medicinal herb and tobacco plants, or for the cultivation in vinyl house.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.20-32
• /
• 1982

This survey was conducted to investigate the present status of farm tractor utilization for obtaining a basic reference to the establishment of the government's agricultural mechanization strategies. Thirty two counties from the eight provinces except Jeju were covered in this study. From these selected areas, 433 sample farms having farm tractor were taken to obtain the general informations by the enquete, and 93 sample farms among them to investigate the status of daily tractor use in the year of 1980. The analyzed results are summarized as follows: 1. Farm tractors owned by the rice-oriented farms holds 71.5 percent of the total number of tractors the livestock-oriented farms 17.0 percent, and the orchard-oriented farms 7.0 percent. Among the farm tractors 64.3 percent was a large size (46ps) and 35.7 percent a small size(19~23ps). 2. Most of the tractors surveyed were equipped with the essential attachments such as plow and rotavator. About 18 percent of the tractor owners had no trailer, which seemed too high considering the large percentage of tractor use for transportation. The availability of other attachments was very low except a grader on the rice-oriented farms and a hay harvester and a front loader on the livestock-oriented farms. 3. The average size of farm was 3.9 hectare for the rice-oriented farms, 13.9 hectare for the livestock-oriented farms and 7.4 hectare for the orchard-oriented farms. It was obious that the average farm size of was too small compared to the theoretical machine capacity of the tractors. 4. About 70 percent of the tractor operators were in the age of twenties and thirties. About 90 percent of them had an educational level of middle school graduate or above even though their technical level was very low. 5. Any particular problem in tractor use was not found in this survey. From the farmer's preference for purchasing a new tractor, however, it is estimated the demand on a 20-30ps tractor will be more increased. 6. The average annual use of tractor was of about 100 days or 400 hours. It appeared that the rice-oriented farms used most with 412.4 hours per year, and followed by the livestock-oriented farms with 403.6 hours, the orchard oriented farms with 377.7 hours. 7. Among the total hours of tractor use, 47.3 percent was for transportation, and 41.6 percent was for plowing and rotary tillage. The largest portion of the annual tractor use was taken by transportation on the livestock-oriented farms, by land preperation on the rice-oriented farms, and by loading and chemical spraying on the orchard-oriented farms. 8. The hours of tractor use had a peak in May. The hours of use for own farm was remarkably different among the different farm oriented, but there was no considerable difference between the too different sizes of tractor. 9. The hours of tractor use decreased as the age of the operator or the educational level increased. The reason might be that the operators who had a high educational level or were older had a tendency of disliking custom works. 10. The average custom use of tractor was 171.3 hours per year, and the ratio of custom work was 63.7 percent on the rice-oriented farms, 31.7 percent on the livestock-oriented farms and 22.4 percent on the orchard-oriented farms. Among the custom works, the most popular one was the grader leveling. 11. The charge on custom work was about 40,000 Won per hectare for plowing and rotary tillage, and it was the most expensive in the southeastern region, and next followed by the southwestern region. 12. The average plowing capacity of the small tractor was 7.8 hours per hectare in the paddy field, and that of the large tractors was 4.3 hours per hectare. The average rotary-tilling capacities of the small and the large tractors were 6.5 and 4.3 hours per hectare, in the paddy field respectively.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.121-127
• /
• 2002

당근은 미나리과에 속하는 직근성 채소로서 비타민A가 다량 함유된 건강식품으로 우리나라에 6,000㏊ 내외로 재배되고 있다. 재배지역은 우리나라 전체 재배면적 중에서 남제주군 지역이 44.5%, 경남 김해, 양산지역이 16.1%, 강원 평창지역이 11.1%를 점유하고 있으며 총 재배면적의 70% 이상이 주산단지 화되어 있어 기계화가 용이한 작목이다. 당근재배에 있어서 10a당 작업단계별 노동투하시간을 보면 전체 100.2시간으로 경운정지, 방제작업만 기계화가 이루어지고 대부분 인력에 의존하고 있는 실정이다. (중략)

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.301-305
• /
• 1995

This study was conducted to find out the changes of soil physical properties and rice growth by the different soil prepartion, such as direct seeding in dry or submerged condition, tillage or no-tillage, and transplanting the infant seedlings. Soil bulk density and hardness were higher in no-tillage plots than tillage plots, and in dry-seeding plots than submerged seeding plots. Permeability of no-tillage plot was increased 56% and water requirement was also increased 27% compare to the conventional transplanting condition. In no-tillage plot, the soil water contents were so rapidly decreased that easily changed to optimum condition for machinery working. The root growth of rice was inhibited as increasing the soil bulk density at early stage, bottom of culm in no-tillage submerged plot was located 0.9cm above the soil surface and the rice plant slightly lodged. The root distribution of surface layer was higher in no-tillage plot and the heading date was 2 days earlier in no-tillage plots than tillage plots, and 3 days earlier in dry seeding plot than submerged seeding plot. Rice yields of no-tillage plots were 5.55 M/T/ha and 5.16 M/T/ha for dry and submerged seeding respectively. These yields were lower about 12.1 % in dry seeding and 18.3% in submerged seeding compare with 6.31M/T/ha of transplanting plot. Rice yields were higher at dry seeding than submerged seeding in no-tillage condition, but in tillage condition, the rice yields were better at submerged seeding plot than dry one.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.134-141
• /
• 2005

Cultivation of winter cover crops and its soil utilization for summer main crops in slope upland is very important at the respects of diminution of soil erosion and non-point pollution source. The effects of cover crop, hairy vetch as no-tillage or conventional tillage on prevention of soil erosion and reduction of chemical nitrogen fertilization were investigated in the slope upland with whiter clover living mulch (partial tillage) in Suwon for three years and with rye (conventional tillage) in Hongcheon for two years, respectively. In Suwon, amounts of soil lost by rainfall runoff decreased as much as 90% by hairy vetch-no tillage (HV-NT), white clover-partial tillage (WF-PT) together with the decrease of rainfall runoff compared to winter fallow with conventional tillage (WF-CT). In addition, amounts of weed also decreased as much as 80-90% by HV-NT and WF-PT. Corn yield decreased much at the plot of WF-PT mainly due to competition for soil water and nutrients between clover and corn at the early corn growth stage. On the contrary, corn yield increased by HV-NT compared to WF-CT regardless of weed control. In Hongcheon, amounts of soil eroded during winter season before corn seeding were reduced as much as 95% by cultivation of hairy vetch and rye compared to winter fallow. Amount of soil eroded during waxy corn growing season was reduced as much as 98% by HV-NT compared to WF-CT. Also, soil incorporation of hairy vetch and rye as green manure with conventional tillage at corn seeding time could reduce soil erosion as much as 70% compared to no soil cover with conventional tillage. Ear yields of waxy corn were increased 10% higher at hairy vetch green manure (HV-CT) without nitrogen fertilizer, 20% higher at HV-NT with standard nitrogen fertilizer, respectively than WF-CT. But ear yields of waxy corn were decreased by rye green manure (R-CT) and HV-NT at the condition of no nitrogen fertilizer. It was concluded that hairy vetch was better as winter cover crop to reduce both soil erosion and chemical nitrogen fertilizer simultaneously in slope upland than other cover crops.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.360-366
• /
• 2021

Garlic is an important crop, accounting for 1.1 trillion won out of 3.7 trillion won for the total production of seasoned vegetables in Korea. On the other hand, the cultivation area and production volume are decreasing continuously due to the shortage of an agricultural labor force, aging, and insufficient mechanization. In particular, the mechanization of garlic sowing is barely performed, resulting in large amounts of labor. Therefore, it is necessary to study the mechanization of planting garlic. Therefore, in this study, to determine the optimal working conditions for mechanical sowing of garlic, an experiment was conducted to compare the yield according to the sowing angle and depth of garlic during sowing. After sowing using a seeding machine set under optimal conditions, the conventional work and yield were compared. The results showed that it is most appropriate to sow garlic with a sowing angle of 45° or 90° and a depth of 2 cm to 4 cm, and there is no difference in the yield between sowing with a sowing machine and conventional work.