• Journal of Life Science
• /
• v.34 no.6
• /
• pp.365-376
• /
• 2024

The present study assessed the cytotoxic effects on cell growth and senescence in human cancer (A-549, AGS, HCT-116, MDA-MB-231, and U 87-MG) and normal (MRC-5 and mesenchymal stem cells) cell lines treated with efavirenz (EFA), an inhibitor of non-nucleoside reverse transcriptase (RTase). Following EFA treatment, the half-maximal inhibitory concentration (IC₅₀) values were approximately 15 µM, and the IC₅₀ value was significantly (p<0.05) lower in the cancer cell lines, compared to normal cell lines. After determining the IC₅₀ values against EFA, each cell line was treated with 15 µM EFA for up to one week. Significant (p<0.05) decreases in endogenous RTase and telomerase activity were observed in the cancer cell lines. RTase and telomerase activity were absent or detected at very low levels in both EFA-untreated and treated MRC-5 and MSC normal cells. The cell doubling time (CDT) was also significantly (p<0.05) prolonged by the decreased cell growth rate in the EFA-treated cancer cell lines compared to the untreated cell lines. Furthermore, EFA-treated cancer cells displayed a high number of cells with a high intensity of senescence-associated ß-galactosidase activity (SA-ß-gal activity), compared to the untreated cells. The present study showed that inhibition of RTase activity induces cellular senescence and arrests cell growth in human cancer cell lines; however, normal cell lines showed greater tolerance against EFA. RTase treatment could offer optional chemotherapy for cancer treatment in human cancer cell lines with high RTase activity.

• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.323-337
• /
• 1999

Late Cretaceous to early Tertiary volcanic rocks in the Kyongsang basin exhibit high-K calc-alkaline characteristics, and originated from the magmatism related genetically to subduction of Kula-Pacific plate. They represent HFSE depletion and LlLE enrichment characteristics as shown by magmas related to subduction. Early studies on the depth of magma generation has been estimated as 180-230 km based on K-h relation should be reevaluated, because the depth of peridotite partial melting with 0.4 wt. % water is 80-120 km at subduction zone, and subducting slab in premature arc can melted even lower than 70 km. Moreover the increase of potassium contents depends on either contamination of crustal material and fluids of subducting slab or low degree of partial melting. If the inclination of subduction zone is 30 degrees and the depth to the Benioff zone is 180-230 km, the calculated distance between the volcanic zone and trench axis would be 310-400 km. It is unlikely because the distance between the Kyongsang basin and trench during late Cretaceous to early Tertiary is closer than this value and not comparable with generally-accepted models in subduction zone magmatism. $K_{55}$ of the volcanics in the Kyongsang basin is 0.3-2.3 wt.% and the average indicate that the depth ranges between 80-170 km on the diagram of Marsh, Carmichael (1974). Fractionation from garnet lherzolite, assumed the depth of 180-230km, is not consistent with the REE patterns of the volcanoes in the Kyongsang basin. Futhermore, the range of depth suggested by many workers, who studied magmatism related to subduction, imply shallower than this depth. Crustal thickness calculated by the content of CaO and $Na_2O$ is about 30 km and about 35 km, respectively. Paleo-crustal thickness during late Cretaceous to early Tertiary times in the Kyongsang basin inferred about 30 km calculated by La/Sm versus LaJYb data, which is also supported by many previous studies.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.91-99
• /
• 2010

We used a multiplex PCR primer set composed of 11 microsatellite (MS) markers and two sexing markers for gender detection. Genomic DNA extracted from hair roots of 3,510 Hanwoo were genotyped. Based on the 11MS markers, no animals had identical genotypes(TGLA227, BM2113, TGLA53, ETF10, SPS115, TGLA122, ETH3, ETH225, BM1824 and INRA23). The expected probability of identity among genotypes of random individuals (PI), the probability of identity among genotypes from random half-sibs ($PI_{half-sibs}$) and among genotypes of random individuals, and the probability of identity among genotypes from random sibs ($PI_{sibs}$) were estimated as $1.31{\times}10^{-23}$, $2.52{\times}10^{-16}$and $1.09{\times}10^{-6}$, respectively using the API-CALC program, version 1.0. We successfully completed the genotype analysis of 3,510 Hanwoo with a 3.93% genotyping failure rate. It was revealed that extracting DNA from the hair root was a time-efficient and cost-effective method to collect specimens for DNA isolation from live animals. This method also minimized stress for the animals during specimen collection. Among the hair roots from the back, belly, upper tail and lower tail, 5~13 hair roots of the lower tail led to the best genotype analysis results. Finally, we established a 96-well-format method of DNA preparation applicable for high- throughput genotype analysis.

• Journal of agriculture & life science
• /
• v.53 no.1
• /
• pp.117-126
• /
• 2019

This paper presents an experiment to examine the possibility of treating carcass while making compost with a horizontal cylinder composting equipment. The findings were as follows: as for heavy metal content, zinc content was above the allowed level in some measuring sections of the general operation and the entire measuring sections of the carcass operation, whose copper content was higher than the general operation. The wood chip operation was lower than the allowed level in all the heavy metals and similar or the same as the carcass operation in copper, cadmium and arsenic. Its nickel content was 29.5~63.8%, which was relatively higher than 9.3~18.0% and 15.8~18.0% of the general and carcass operation, respectively. Its chrome content was 14.2~31.9%, which was relatively higher than that of the general and carcass operation. The integrated operation was lower than the allowed level in all the heavy metals. Its copper and zinc content was 34.9~54.5% and 53.1~75.9%, which was similar to 48.9~52.6% and 64.6~85.9%, respectively, in the wood chip operation. Its chrome and nickel content was stabilized while their content was rather high in the wood chip operation. The average and final moisture content of the carcass operation was 60.7% and 49.6%, respectively. Its average moisture content was a little bit higher than the recommended level of 55.0%, but its final moisture content was lower than the recommended level. The average and final moisture content of the integrated operation was 29.2% and 18.6%, respectively, which was the lowest level among the four operation modes. The overall moisture content of the operation modes was under the recommended level of 55.0% with some variance among the modes. The C/N ratio was the lowest in the carcass operation and the highest in the general operation. The average C/N ratio of the operation modes was in the range of 13.7~20.3 with the total average of 18.3, and the modes kept it under the proper level of 30.0.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.30-36
• /
• 2024

This study was conducted to determine the optimal working conditions when a recently developed blower-type onion stem cutter is utilized for cutting onion leaves at harvest time. The June 20 leaf cutting treatment group had the highest leaf dryness among the treatment groups (leaf dryness: 66.3%; leaf moisture content: 50.5%); the residual leaf length was 6.7 ± 3.5 cm. It is considered to have the best mechanical leaf cutting performance among the treatment groups because it is included in the optimal range of 4-10 cm. The average working speed of mechanical onion leaf cutting using the stem cutter was 0.17 m·s^-1, which is approximately 3.4 times faster than the average working speed of 0.05 m·s^-1 in the human leaf cutting treatment group. This is expected to save approximately 2.6 hours compared to human labor (based on one person) when working on a 10a area using this machine. In addition, the incidence of damaged bulbs in the machine leaf cutting treatment group was 1.3%, compared to 0.0% in the manual leaf cutting treatment group. This suggests that the mechanical leaf cutting treatment group had a higher average onion bulb decay rate during storage than the manual leaf cutting treatment group. When the storage characteristics of each treatment group were examined, the decay rate by bulb part (leaf connected or root connected) after 8 months of storage was higher in the treatment group with a residual leaf length of less than 5.0 cm after mechanical leaf cutting than in the treatment with a residual leaf length of more than 5.0 cm. This is thought to be due to the fact that treatments with a residual leaf length of less than 5.0 cm are more susceptible to infection by pathogens that cause decay during storage than treatments with a residual leaf length of 5.0 cm or more. Based on the results of this experiment, performance target of the experimental machine (residual leaf length after operation: 5 cm), and existing research on the optimal residual leaf length for onion harvesting, it is recommended to cut onion leaves so that the residual leaf length is 5-10 cm when using the stem cutter.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.45-52
• /
• 2016

In order to select excellent cross parents for development new cultivar of low temperature tolerant, combining ability was conducted by 24 cross combinations obtained from crosses between 'Dahong', 'Gamhong', 'Maehyang', 'Seolhyang' as seed parents and 'Dahong', 'Gamhong', 'Maehyang', 'Sugyeong', 'Sunhong', 'Wongyo 3111' as pollen parents. The results showed that two cultivars of 'Dahong', 'Gamhong' were not suitable for seed parents. Because average fruit weight in case of 'Dahong' as a seed parent was the tendency to become the smallest in total cross combinations, survival ratio in case of 'Gamhong' as a seed parent was the lowest in total cross combinations. And fruit hardness in case of 'Sunhong' as a pollen parent was the tendency to low, incidence of malformed fruit in case of 'Sugyeong' as a pollen parent was the tendency to be increased. Therefore, two cultivars of 'Sunhong', 'Sugyeong' was also not suitable for pollen parents. But In case of 'Maehyang' and 'Seolhyang' as seed parents, germination percent and survival rate were relatively higher than other seed parents, fruit quality and yield had also excellent. Therefore, there could be selected to 'Maehyang' and 'Seolhyang' as seed parents and 'Maehyang', 'Seolhyang', 'Wongyo3111' as pollen parents. Especially, the crosses 'Maehyang' × 'Seolhyang', 'Seolhyang' × 'Maehyang', 'Seolhyang' × 'Wongyo3111' were suitable for cross combination for development new cultivar of low temperature tolerant to be demonstrated the excellence as cross parents in sugar contents, fruit weight, fruit hardness and yield.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.1-8
• /
• 2001

This experiment was conducted to determine the effect of nursery soils and seeding density on seedling growth characteristics in automatic facility for raising of rice seedlings. The seedling characteristics were evaluated for the 10-day and 15-day old seedlings grown in six different nursery soils including farm-made soils. Two levels of seeding amount, 250 g and 300 g/tray ($60{\times}30{\times}2.5$ cm), were applied to compare the seedling characteristics according to seeding density on different nursery soils. There were wide difference in soil components among the nursery soils tested. In acidity of nursery soils, 'Bunoog 2' was the highest, pH 5.1, and 'Samkyung' was the lowest, pH 8.6. The content of available phosphate was the highest value, 843 ppm, in 'Bunong 1' and the lowest (74 ppm) in farm-made soils. The total nitrogen content of 'Bunong 1, 2, 3' and 'Weonjo' soils was higher than there of 'Samkyung' and farm-made soils. There was no difference in plant height among three types of 'Bunong' soils (Bunong 1, 2, 3), but the seedling height grown in farm-made soils was shorter than there in other nursery soils. The plant heigh was slightly taller as the increase of seeding amount from 250 g to 300 g/tray, and the difference in plant height was larger in 15-day old seedlings as compared with 10-day old seedlings. Dry weight of seedlings grown for 15 days in three 'Bunong' soils was heavier than those in other nursery soils. Based on the growing characteristics of seedlings grown in different nursery soils, the heat result was obtained from a nursery soil, 'Bunoog 2', among six marketing nursery soils tested.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.589-592
• /
• 2008

National Road No.24 connects Ulju-gun in Ulsan Metropolitan City and Milyang city in south Gyongsang Province. The width of the road is small and narrow and many of the dangerous cut slopes are distributed along the way. In 2002, the government officer carried on the brief exploration about road cut slopes, and KICT conduct a detailed additionally investigations 57 dangerous cut slope sites of them. We gained a variety of information of the each slope such as length, slope, discontinuites et al.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.3
• /
• pp.186-192
• /
• 2010

An infrared heating system, installed in a small venlo-type glasshouse ($280m^2$) in Gyeongsang National University, Jinju, Korea, was used to investigate its heating effect with potted Phalaenopsis, Schefflera arboricola 'Hongkong', Ficus elastica 'Variegata', and Rosa hybrida 'Yellow King' as the test plants. Temperature changes in test plants with the system turned 'On' and 'Off' were measured by using an infrared camera and the consumption of electricity by this infrared heating system was measured and analyzed. In potted Phalaenopsis, when the set air temperature of the greenhouse was $18^{\circ}C$, temperature of leaves and the growing medium were $22.8{\sim}27^{\circ}C$ and $21.3{\sim}24.3^{\circ}C$, respectively. In such tall plants as Schefflera arboricola 'Hongkong' and Ficus elastica 'Variegata', the upper part showed the highest temperature of 24.0 and $26.9^{\circ}C$, respectively. From the results of temperature change measurements, the plant temperatures were near or above the set point temperatures with some fluctuations depending on the position or distance from the infrared heating system. When air temperature between night and dawn dropped sharply, plant temperatures were maintained close to the set temperature ($18^{\circ}C$). There was a significant difference between 'On' and 'Off' states of the infrared heating system in average temperatures of root zone and leaf: 21.8 and $17.8^{\circ}C$ with the system 'On' and 20.4 and $15.5^{\circ}C$ with the system 'Off', respectively, in a cut rose Rosa hybrida 'Yellow King'. The heating load was about $24,850{\sim}35,830kcal{\cdot}h^{-1}$, which comes to about 27,000~40,000 won in Korean currency when calculated in terms of the cost of heating by a hot water heating system heated by petroleum. The cost for heating by the infrared heating system was about 35% of that of a hot water heating system. With the infrared heating system, the air temperature during the night was maintained slightly lower than the set point air temperature, probably due to the lack of air tightness of the glasshouse. Therefore, glasshouses with an infrared heating system requires further investigation including the installation space of the heat-emitting units, temperature sensor positions, and convection.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.81-88
• /
• 2018

This study analyzed the characteristics of 6 recyclable bulking agents which can replace sawdust and rice hulls that are commonly used in livestock manure composting. The content of all the hazardous chemicals found in the bulking agents used in this experiment was between 0.0 and 34.1 ppm, which was noticeably lesser than the maximum content levels of hazardous substances 5.0~900.0 ppm prescribed by the Rural Development Administration(RDA), which means that the bulking agents would be able to replace sawdusts and rice husks. The water content of the bulking agents ranged from a minimum of 12.4% to a maximum of 16.6% in the original state, which was much less than 60%, the optimal moisture content. These results indicate that they would be able to function fully as bulking agents. Their water absorption rate was in the range of minimum 31.9% ~ maximum 600.0%, which showed huge differences among the types of bulking agents. The most appropriate bulking agent in terms of water absorption rate was wood pellets. It was the highest in the wood briquette manufactured by A, which was followed by C and B in the order. The shear strength of the 5 types of bulking agents in the original state was 271.7 N on an average, the highest figure of all, except for the oak briquette whose shear strength could not be measured and the wood pellets in the absorption state. The shear strength in the dry and absorption states then followed, and were 78.0 N and 27.7 N on an average, respectively. The wood briquette of A recorded considerably lower shear strength than that of B and C. Overall, shear strength tended to increase according to lower water absorption rates. Since pine wood chips and oak cuts have relatively greater shear strength even in the absorbing state than the other materials, they will be able to endure some power in the case of stirring with pig droppings.