• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.97-103
• /
• 2017

The purpose of this study was to investigate muscle activity of cervical erector spinae & upper trapezius while using a smartphone according to anterior pelvic tilt & posterior pelvic tilt in sitting position. & we also want to obtain basic data necessary for development of IoT devices. Fifteen healthy men & women aged 20-30 were enolled, After anterior pelvic tilt & posterior pelvic tilt in sitting position were adjusted, they used a smartphone for 5 minutes & EMG signal was measured simultaneously. We used median 3 minutes of measured EMG signal. The results of this study were as follows: In the sitting position, the use of smartphone in anterior pelvic tilt had significantly lower %RVC values in both cervical erector spinae (p <.001), left upper trapezius (p <.001) & right upper trapezius (p <.002) in comparison with posterior pelvic tilt. This means that anterior pelvic tilt make vertebrae maintain normal curvature & prevent forward head posture occurred while using a smartphone. It reduces loads around neck & shoulders, so that %RVC value is significantly lowered. In the future, new posture corrected IoT devices with an aspect of pelvic tilt should be developed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.21-32
• /
• 2010

The convergence angle of a prepared tooth is a very important factor in the retention and resistance of a crown restoration. But various intraoral environments and clinician's techniques make it difficult to obtain the ideal inclination. Therefore, in this study, clinical convergence angle of a prepared tooth was investigated. The data was collected from the patient models of prosthodontic residents and the patient models of general practitioners. The images of mesiodistal and buccolingual surfaces were taken with a digital camera to evaluate the convergence angle on 'ImageJ' program. The images were classified according to the criteria (1. Clinician group, 2. Position in the dental arch, 3. The purpose of abutment preparation)and then analyzed. The mean convergence angle of a prepared tooth for Korean clinicians was $15.02^{\circ}$ (${\pm}10.13^{\circ}$). 1. It was significant in the convergence angle between the general practitioner group and the prosthodontic resident group(p<0.05). 2. It was significant between the mesiodistal and buccolingual surface in the the prosthodontic resident group(p<0.05). 3. For the general practitioner group, it was significant when anteriors and premolars were compared with molars(p<0.05). For the prosthodontic resident group, it was significant when anteriors and premolars were compared with molars (p<0.05). 4. When divided into upper and lower arches, for the general practitioner group, it showed significant difference in the buccolingual aspect(p<0.05). Also in the prosthodontic resident group, it showed significant difference in the buccolingual aspect(p<0.05). 5. Dividing left and right sides of the arches, there was no significant difference in the general practitioner group and the prosthodontic resident group(p>0.05). 6. In the general practitioner group, it was significant in the mesiodistal axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). In the prosthodontic resident group, it was significant in the mesiodistal and overall axial convergence angle of single crown abutment and 3 unit bridge abutment(p<0.05). Clinical convergence angle of prepared tooth in Korea was included in agreement with other studies investigating convergence angle that ranged from 10 to 22 degrees, achieved in clinical practice.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.50-57
• /
• 1989

Tapered etching of polysilicon films has been achieved by implanting phosphorus ions into the polysilicon film and using plasma etch in either $CF_4-O_2\;or\;SF_6$. A two-step plasma etching method is also proposed to control the taper angle of the etched edge without changing the implantion conditions. The taper angle is determined by the ratio of the etch rate of the undamaged region to that of the damaged top region of the polysilicon layer. The ratio is found to be dependent on the implantion dose, the implantion energy and the anisotropy of etching. The minimum angle in our experiments is about $10^{\circ}$. When the two-step etching method is employed, the taper angles can be controlled from the minimum angle up to about $55^{\circ}$.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.268-276
• /
• 2010

This study was to investigate the knee joint flexion angle and the foot pressure during climbing with different slope. The 24 healthy subjects were participated. And foot pressure was investigated using Parotec system. The knee joint flexion angle were filmed to using a video camera on each slope($0^{\circ},\;3^{\circ},\;6{\circ},\;9^{\circ}$). And knee joint angle was investigated by Dartfish. The data were analyzed ANOVAs. In conclusion, there was significantly different that knee joint flexion angle related on each slope angle. In foot pressure, there was significantly different in lateral heel area(1 cell), medial midfoot area(9 cell), medial forefoot area(15, 16 cell) of left foot, and in lateral heel area(3 cell) of right foot. There was significantly different of foot pressure in lateral and medial heel when knee joint flexion angle is between $10^{\circ}$ and $20^{\circ}$. There was change of gait cycle according to walking slop angle increasing, and the initial contact phase was shorter, the foot pressure in lateral heel was lower.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.399-399
• /
• 2016

현대 인류는 비약적인 경제성장으로 인하여 급격한 도시화와 산업화를 이루었다. 하지만 이러한 성장을 위해 수반되는 자원개발 및 생활환경조성으로 인한 토지개발이 진행되어 많은 양의 토양이 유실되고 있다. 토양유실을 관리하기 위해서는 모니터링을 통해 관리하는 방법과 모형을 통해 유실되는 토양의 양을 산정하여 관리방안을 제시하는 방법이 있다. 현재 전 세계적으로 사용되고 있는 범용토양유실량 산정공식(USLE)은 사용상의 편리성과 연간 토양유실량을 산정할 수 있는 이점이 있다. 뿐만 아니라 국내의 환경부에서는 USLE 공식을 적용한 '표토 침식 현황에 관한 고시'를 제정하여 유실되는 표토를 관리하고 있다. 하지만 USLE 공식을 구성하고 있는 인자 중 P factor는 경사도만을 고려하여 인자 값을 제시하고 있으며, 밭에 적용된 관리방법과 작물, 경운방법 등을 고려하지 않아 방법에 차이에 따른 발생되는 토양유실량에 차이가 발생하게 된다. 이러한 문제점을 고려하여 경작지의 경사도와 적용된 관리방안을 복합적으로 고려한 P factor 선정 체계가 필요한 시점이다. 따라서 본 연구에서는 실제 경작지 조사를 통해 경작지 별 관리방안과 경사도를 고려한 P factor를 제안하고자 한다. 관리방안과 경사도를 복합적으로 고려한 P factor를 제안하기 위해 선정된 유역은 강원도 양구군 해안면 유역과 자운리 유역, 안동시 임동면 반변천 상류 유역을 선정하여 위치하고 있는 밭에 대한 현장조사를 진행하였다. 조사항목은 경작지의 경사도, 재배작물, 관리방법, 경운방법 등을 조사하였으며, 이를 바탕으로 경사도와 관리방법을 복합적으로 고려한 P factor를 재산정 하였다. P factor를 재산정한 결과 대상 유역 내 밭에 적용된 관리방법과 경운방법, 재배작물의 차이로 인해 상이한 값이 산정되었다. 또한 기존 P factor와 재산정된 P factor를 사용하여 산정한 토양유실량의 차이가 약 17%정도 나타났다. 따라서 본 연구를 통해 재산정된 P factor는 토양유실에 직간접적으로 관여하는 조건들을 복합적으로 고려한 P factor로써 정확한 토양유실량을 산정하는데 기여할 것으로 판단되며, 본 연구를 바탕으로 전국단위 USLE P factor를 산정을 위한 추가적인 연구가 필요하다고 판단된다.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.71-76
• /
• 2010

The purpose of this study was to investigate the changes of long term ECG response in a company with middle-aged male employees. Subjects were 60 men who were 40~55 years old. We enrolled 30 exercise group subjects into a 3-year exercise program. In measurement index, body composition was measured by % body fat and BMI. Exercise stress test analyses were measured using ST/HR slope and QRS vector. Statistical analysis was performed using analysis of repeated ANOVA. Results of this study were as follows: In ST/HR slope, the control group showed symptoms of ischemia after nine minutes of exercise. In the rest frontal axis of the QRS vector, the control group had a tendency towards right axis deviation. In the rest horizontal amplitude of the QRS vector, the control group had a tendency to show a significant decrease, but it was increased significantly in the exercise group. These findings suggest that inactive company workers was showed a decrease of exercise capacity, early diagnosis exercise-induced ST depression, and prolonged deviation of QRS vector, but that cardiac function could be elevated in active middle aged men through regular exercise program participation.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.4
• /
• pp.19-30
• /
• 2020

This numerical study is to investigate the seepage characteristics of the side of the structure in the event of leakage from the structural connection part of the drainage structure installed through the enlarged levee, and to analyze the effect of piping on the stabilization of the levee by the lateral penetration behavior. To take into account lateral seepage behavior, 2D and 3D numerical analyses were performed on the same model, and the effect of lateral seepage was analyzed to assess the validity of the numerical analysis. As a result, when leakage occurs and a lateral seepage is considered with the gate located on the riverside land, the maximum pore water pressure near the leakage point of the structure has been reduced by half compared to the normal seepage state where no leakage occurred. Excessive variation in the pore pressure was shown at the lower part of the structure, especially if lateral seepage is not considered. As a water level rises to the high water level, it shows the hydraulic gradient was larger than the critical hydraulic gradient, which will be vulnerable to long-term piping. If a gate is located in the inland and side seepage is not considered, the effect of the seepage water such as hydraulic gradient and seepage velocity is underestimated compared with the case of considering side seepage. The maximum hydraulic gradient is relatively small when lateral seepage is neglected if a gate is located in the riverside land and there was might be a risk of piping or loss of material. In addition, the period exceeding the critical hydraulic gradient was interpreted as a short time zone. As a result, it is considered that the possibility of piping can be underestimated if side seepage is ignored.

• Ecology and Resilient Infrastructure
• /
• v.7 no.2
• /
• pp.83-89
• /
• 2020

This hydraulic study analyzed the scour effect at fixed downstream weirs based on the changes in the upstream bed slope. The study was performed using six different bed slopes, that is, 0%, 2%, 3%, 4%, 7%, and 10% at 0.117 ㎥/s in all cases. The scour depth, scour length, and scour volume were measured using a broadband laser scanner to quantitatively analyze the scour at the downstream weir. This study also examined the adequacy of the designed apron length by comparatively analyzing the results of the scour experiments and the apron length calculated using conventional design standard formulas. The analysis of the local scour effect at the downstream weir showed that scour length and scour depth increased as the bed slope became steeper. A comparison between the results of the scour experiment and that of the conventional design formulas showed that both formulas of the National Construction Research Institute and the Bligh were distributed within the allowable values when there was no upstream bed slope. However, as the bed slope upstream of the weir gradually increased, the scour lengths of the apron deviated slightly from the values obtained from the conventional design formulas.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.341-346
• /
• 2002

이 연구는 게르버 보 형식의 포스트텐션 PC 골조 구조 시스템의 실용화를 위해 골조 전체의 구조 성능 시험을 수행하며, 여기서 보-기둥 접합부 및 내민 보-단순 보 접합부의 구조 성능과 골조의 안전성을 확인한다. 시험은 400 mm$\times$800 mm 단면의 경간 3 m 보와 500 mm$\times$600 mm 단면을 갖는 높이 3 m 기둥의 실물 크기 시험체를 제작하여, 기둥에 80 톤의 축 하중을 준 상태에서 단순 보 중앙에 하중을 가력하여 기둥-보 접합부와 단순 보-내민 보 단면 축소 연결부의 구조성능을 파악한다. 시험 결과, 보 - 기둥 접합부는 예상 설계 하중 40톤 이상에서도 강 접합에 가깝게 거동하였고, 단순 보- 내민 보의 단면 축소 연결부는 경사철근의 사용으로 초기 균열 및 균열 확산에 대한 억제 효과가 있었으며, 예상 설계 전단력 40톤에서 안전하다는 것이 확인되었다.