• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.35-41
• /
• 1993

The height differences in Mean Sea Level is an important factor in geodetic leveling net, because MSL is the reference datum for height. Geodesists and Oceanographers agree on the height differences in MSL in the east-west direction, but they disagree almost always on the north-south slope, each suspecting systematic errors in the leveling methods of the others. A promising method for determining this slope is comparison of MSL at the tidal station connected by geodetic leveling. The slopes of the sea surface along the coast of Korean Peninsular is estimated from conventional local MSL at the tidal station and bench mark height of first order leveling net in Korea. As a reference level surface, MSL at Inchon is chosen. The results indicate that sea level rises along coast of Korean Peninsular from south to north about 5.5 cm/latitude. In the east-west direction, sea level along East Sea coast stands about 5 cm higher than that along Yellow Sea coast. These are not invariable but provisional phenomena. It may become certain provided that the exact MSL is estimated.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.213-213
• /
• 2011

근래 이상기후에 의한 강우량 증대와 도시화에 따른 첨두유출량의 증대 및 도달시간의 단축은 기존의 유수지만으로 도시홍수를 대처하는데 그 한계점에 다다르게 되었다. 1990년대에 들어 각종 우수유출 저감시설의 활용으로 이상의 문제를 해결하고자 하는 노력들이 시작되었으며, 현재 신규개발지에 저류지와 같은 우수유출저감시설 설치를 법제도적으로 의무화 하고 있어, 전국적으로 천여개소의 저류지가 시설되어 있거나 계획 중에 있다. 저류지는 개발로 인해 증가된 첨두유출량을 개발전의 상태로 저감시키기 위하여 임시 또는 상시 저류하거나 저류능력 이상의 유출량에 대해서는 암거방류시설을 통해 하류부의 하천 또는 하도로 방류시키는 역할을 수행하는 수공구조물로서 일반적으로 저류지 계획 및 설계는 첨두유출량 증가분에 대해 초점을 맞추고 있을 뿐 방류시설에 대한 구체적인 설계는 이루어지지 않고 있는 실정이다. 또한 현재 국내에는 저류지 방류시설로 주로 사용되는 암거에 관한 설계규정이나 기법은 미미한 상태로, 한국도로공사(1991)에서 발표한 "도로배수계획"을 이용하고 있으며, 이는 미국 연방도로국(FHWA, 1985)에서 발표한 설계기법을 그대로 인용하고 있다. 즉, 지형 또는 현장 여건에 따라 암거 흐름의 8형식 중 하나의 형식으로 결정하고, 그 형식에 따라 관련도표를 이용한 시산법 또는 도식해법을 적용하여 유입부 상류수위를 산정함으로써 암거설계가 이루어진다. 하지만 이러한 암거설계 방식은 도로 배수암거에 적합한 것으로 저류지 배수암거에 적용하기에는 무리가 있다고 본다. 따라서, 본 연구에서는 저류지의 일반적인 특성상 암거흐름 8형식 중 Class-II군의 암거 상류부 수위가 잠수된 조건 즉, 평상시 저류지가 일정수위 이상의 저류량을 유지하고 있는 상태에서 저류지 암거방류시설의 대표적인 설계인자인 암거직경, 암거경사, 암거경사, 하류단 수위조건의 변화에 따른 상류부 수위변화를 유량별로 분석해 보았다. 방류 암거의 개수를 고려하기 위하여 암거상류부 수위와 암거직경의 관계해석 시 암거단면적을 이용하여 분석하였으며, 각각의 유량별로 상류부 수위와 암거단면적의 관계를 회귀식으로 제시하였다. 암거상류부 수위와 암거경사의 관계를 분석한 결과 암거경사가 5~20%로 변화할 때 암거상류부 수위의 변화는 2~5%정도의 매우 작은 변화를 보임을 확인할 수 있었으며, 암거길이의 경우는 해석 조건의 특성상 상류부 수위에 영향이 전혀 나타나지 않았다. 암거상류부 수위와 암거하류단 수위의 관계에서 암거상류부 수위는 암거하류단 수위가 암거직경과 퇴사위 높이의 합보다 암거하류단의 수위가 높아지는 시점부터 암거하류단 수위에 비례해서 증가되는 결과를 알 수 있었다.

• 주택과사람들
• /
• s.219
• /
• pp.64-67
• /
• 2008

두산건설이 겹경사를 맞았다. 두산건설은 김기동 사장이 올해 6월 열린 건설의 날 행사에서 건설 기술 선진화의 공로를 인정받아 금탑산업훈장을 받은데 이어, 지난 15일에 자체 아파트 브랜드인 두산위브가 '살기 좋은 아파트 대통령상'을 받는 기쁨을 누렸다. 건설 업계에 한파가 불고 있음에도 불고하고 유독 두산건설이 승승장구하고 있는 비결이 무엇인지 살펴보자.

• 순환기질환의공학회:학술대회논문집
• /
• 2005.12a
• /
• pp.57-58
• /
• 2005

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.308-320
• /
• 2006

An analytic solution to the mild-slope equation is derived for waves propagating over an axi-symmetric pit. The water depth inside the pit varies in proportion to a power of radial distance from the pit center. The governing equation is transformed into ordinary differential equations by using separation of variables, and the coefficients of the equations are transformed into explicit forms by using Hunt's (1979) approximate solution. Finally, by using the Frobenius series, the analytic solution is derived. Due to the feature of Hunt's equation, the present analytic solution is accurate in shallow and deep waters, while it is less accurate in intermediate depth water. The validity of the analytic solution is demonstrated by comparison with numerical solutions. The analytic solution is also used to examine the effects of pit geometry and relative depth on wave transformation.

• Explosives and Blasting
• /
• v.14 no.4
• /
• pp.13-19
• /
• 1996

Lately, the improtance of smooth blasting is increasing on every construction fields, suchas underground caves, tunnels, and roadconstruction, etc. The main purpose of smooth blasting is to prevent unnecessary cracks from the base rockwhich preserved permanently and is to gain the smooth fracture plane. So, in smooth blashing, explosives with low detonating velocity are generally used. But it is difficult to discuss general theory on the smooth blashing because the mechanical properties of pertienent rocks are difficult regionally. Accordingly basic reserches on the smooth blasting are demended. In this paper, the mechanisms of the smooth blasting on the rocks containing discontinuities were discussd. Firstly, the writer predicted the formation of fracture plane and unevenness using mathematical methodology, the next the model blast tests were conducted in order to simulate the crack propagation modes from the blast holes. Through the research, the following conclusions were obtained l)The blast test results were in reasonally good agreement with the theoretical prediction. 2)The degree of discontinuity has an influence on the fracture morphology.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.6
• /
• pp.499-506
• /
• 2019

NDSM (Normalized Digital Surface Model) is key information for the detailed analysis of remote sensing data. Although NDSM can be simply obtained by subtracting a DTM (Digital Terrain Model) from a DSM (Digital Surface Model), in case of UAV (Unmanned Aerial Vehicle) data, it is difficult to get an accurate DTM due to high resolution characteristics of UAV data containing a large number of complex objects on the ground such as vegetation and urban structures. In this study, RGB-based UAV vegetation index, ExG (Excess Green) was used to extract initial seed points having low ExG values for region growing such that a DTM can be generated cost-effectively based on high resolution UAV data. For this process, local window analysis was applied to resolve the problem of erroneous seed point extraction from local low ExG points. Using the DSM values of seed points, region growing was applied to merge neighboring terrain pixels. Slope criteria were adopted for the region growing process and the seed points were determined as terrain points in case the size of segments is larger than 0.25 ㎡. Various slope criteria were tested to derive the optimized value for UAV data-based NDSM generation. Finally, the extracted terrain points were evaluated and interpolation was performed using the terrain points to generate an NDSM. The proposed method was applied to agricultural area in order to extract the above ground heights of crops and check feasibility of agricultural monitoring.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.253-265
• /
• 1994

The hydraulic-geometrica1 relations between the riverbed slope and water discharge and other hydraulic variables in some selected alluvial rivels in Korea have been investigated. The rivers from which the data relevant to this study were collected are mainly the first tributaries, considered to be mostly in the equilibrium state, of the 10 major rivers in Korea. The investigating methods adopted in this study are similar to the one suggested by Leopold and Maddock and the one suggested by Garde. All of 18 rivers their drainage areas of which range between 100-2,000 $\textrm{km}^2$ were considered and the changes in riverbed slope, drainage area, bed material size along the downstream river distance were measured. It is found in this study that the change in the riverbed slope, S, along the downstream can be expressed in terms of the coefficient, $\beta$, expressing the change in the drainage area along the downstream and the drainage area, A, by an empirical relation as 0.0063 0.0063 S = $S_{ 0}$ $A_{0}$$^{-------- +0.51}$A-$^{-------- -0.51}$. $\beta$ $\beta$ According to this relation, the riverbed slope of the river reaches investigated in this study appear to be proportional to the -0.6th power of the drainage area. This result is consistent with the previous ones obtained by Hack.k.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.145-154
• /
• 2014

The road network becomes more complex and extensive. Therefore, the inconveniences are caused in accordance with the time delay of the restoration of damaged roads, demands for excessive costs on information collection, and limitations on acquisition of damage information of the roads. Recently, road centric spatial information is gathered using mobile multi sensor system for road inventory. But expensive MMS(Mobile Mapping System) equipments require high maintenance costs from beginning and takes a lot of time in the data processing. So research is needed for continuous maintenance by collecting and displaying the damaged information on a digital map using low cost mobile camera system. In this research we aim to develop the techniques for mosaic with a regular ground sample distance using successive image from oblique camera on a vehicle. For doing this, mosaic image is generated by estimating the homography of high resolution oblique image, and the ground sample distance and appropriate overlap are analyzed using high resolution aerial oblique images which contain resolution target. Based on this we have proposed the appropriate overlap and exposure interval for mobile road inventory system.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2004

Self-potential and electrical resistivity methods were conducted for locating the auriferous mineralized zone, called Jija Vein, of Sambo mine, Limsu-ri, Haeje-myeon, Muahn-gun, Jeollanam-do. The host rocks of the mineralization include gneiss, rhyolite and felsic dyke. Ore vein is mainly fissured-filling type and sulfide minerals, such as pyrite, are disseminated in country rock. By the electrical responses from SP and surface resistivity methods., the mineralized zone is supposed to extend about 360 m directed N5W with the width of 20 m to 30 m. From resistivity tomograms using inclined borehole to surface, the ore body shape is interpreted as the width of 20 m in depth 40 m to 50 m.