• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1141-1153
• /
• 2010

This paper introduces ONLIS(Overlay Multicast Network for Live IPTV Service), a novel overlay multicast network optimized to deliver live broadcast IPTV stream. We analyzed IPTV reference model of ITU-T IPTV standardization group in terms of network and stream delivery from the source networks to the customer networks. Based on the analysis, we divide IPTV reference model into 3 networks; source network, core network and access network, ION(Infrastructure-based Overlay Multicast Network) is employed for the source and core networks and PON(P2P-based Overlay Multicast Network) is applied to the access networks. ION provides an efficient, reliable and stable stream distribution with very negligible delay while PON provides bandwidth efficient and cost effective streaming with a little tolerable delay. The most important challenge in live P2P streaming is to reduce end-to-end delay without sacrificing stream quality. Actually, there is always a trade-off between delay & stream quality in conventional live P2P streaming system. To solve this problem, we propose two approaches. Firstly, we propose DSPT(Distributed Streaming P2P Tree) which takes advantage of combinational overlay multicasting. In DSPT, a peer doesn't fully rely on SP(Supplying Peer) to get the live stream, but it cooperates with its local ANR(Access Network Relay) to reduce delay and improve stream quality. When RP detects bandwidth drop in SP, it immediately switches the connection from SP to ANR and continues to receive stream without any packet loss. DSPT uses distributed P2P streaming technique to let the peer share the stream to the extent of its available bandwidth. This means, if RP can't receive the whole stream from SP due to lack of SP's uploading bandwidth, then it receives only partial stream from SP and the rest from the ANR. The proposed distributed P2P streaming improves P2P networking efficiency.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.321-325
• /
• 2002

For examination, amaranth was first dried its surface after sufficient soaking in water. Dried amaranth was roasted when the moisture contents reached 30∼50%, its nasty smell disappeared and its color turned to yellow and it was puffed. Pretreated amaranth was added to biscuit for the improvement of apparence and merchandise value. The maximum expansion was reported at the moisture percentage of 130∼160% according to the examination of expansion and moisture percentage. In order to compare gelatinization of different processing, three different amaranth were prepared as follows ; Raw amaranth, steamed/dried amaranth, and roasted amaranth. The degree of gelatinization was increased as the percentage of moisture was increased and the degree of gelatinization of roasted amaranth was higher than the one of steamed/dried amaranth, their moisture contents were 62.10% and 57.59%, respectively In addition, the hardness($\times$10$\^$5/dyn/㎠) of roasted amaranth was showed lower values than that of steamed amaranth and raw amaranth were showed the large values. After examining biscuits containing each amaranth, raw amaranth had problem with nasty smell and bad texture, and streamed/dried amaranth were able to remove viscosity but turned brown. Biscuits containing roasted amaranth had good smell and texture, and besides the color of biscuits became bright because roasted amaranth turned white. Biscuits tasted best when it contained 5% of roasted amaranth. The rancidity of biscuits with 5% roasted amaranth were proceeded slowly while roasted amaranth itself had high acid value and peroxide value. For the safety from oxidation, it was fairly safe for about 6 months.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.48-57
• /
• 2010

Purpose: To compare the incidence and risk factors for osteoarthritis after anterior cruciate ligament (ACL) reconstruction between two groups using bone-patellar tendon-bone (BPTB) and hamstring tendon (HT) autograft. Materials and Methods: 53 cases of ACL reconstruction using patellar tendon and 40 cases using hamstring tendon were followed up at least 8 years. Radiographic evaluation was done according to the Kellgren and Lawrence's classification. Clinical functional testing (Lysholm Knee Scores, the Tegner activity scores) and laxity testing (Lachman, pivot shift tests), and the instrumented laxity testing with $Telos^{(R)}$ were all examined in relation to the development of osteoarthritis. Results: Radiographic osteoarthritic changes were detected in 24 patients (45.3%) in BPTB group and 14 patients (35.0%) in HT group. Accompanying meniscal injury (BPTB p<0.001; HT p=0.091), intervals from the injury to reconstruction of > 12 months (BPTB p=0.037; HT p=0.021), and patient's age at reconstruction of > 25 years (BPTB p=0.003; HT p=0.048) were found to be significant independent predictors of osteoarthritis. However, no statistically significant correlations were found between the development of osteoarthritis and the clinical outcome or the radiographic stability in both groups. Conclusion: Although ACL reconstruction using BPTB or HT autograft had good clinical results at an average follow-up of 10 years, considerable incidence of radiographic osteoarthritic changes were noted. Various factors such as accompanying meniscal injury, protracted time from injury to reconstruction, more than 25 years old at the time of reconstruction were related to radiographic osteoarthritic changes.

• Korean Journal of Animal Reproduction
• /
• v.24 no.2
• /
• pp.199-208
• /
• 2000

This study was carried out to investigate of factors concerning to ultrasound-guided follicular aspiration; level of vacuum pressure, diameter of use needle, effect of FSH hormone and conception rate after embryos transfer. 1. Oocytes collection number were 4.2$\pm$2.9 e.a to luteuml phase and follicular phase were 4.4$\pm$3.5 e.a to ovaries of Hanwoo. 2. We taked proper level of aspiration vacuum pressure was 40~120 mmHg to oocytes collection. Oocytes collected number were 4.2$\pm$3.2, 4.3$\pm$3.4, 4.5$\pm$3.4 e.a. to 40, 80, 120mmHg, respectively, follicles aspiration rate were 49, 47, 45%. 3. Effect of collection needle diameter was not difference significantly(P＜0.05), oocytes collected number were 4.4$\pm$3.5 e.a to 170 and 3.0$\pm$1.8 e.a to 18G needle, collected oocytes quality were no difference significantly (P＜0.05). 4. Follicles increase number to FSH hormone injection were 6.2$\pm$2.3 e.a to intramuscle and 1.1$\pm$2.7 e.a. to epithelial injection method. 5. Conception rate derived from E.T. was 11.1% to freezing embryos and 46.2% to fresh E.T., difference significantly(P＜0.05).

• Journal of Korean Society of Forest Science
• /
• v.79 no.1
• /
• pp.56-70
• /
• 1990

Eighteen Korean white pine (P. koraiensis S. et Z.) families were tested in 3 different regions from age 5 to 9. Family and site were significant sources of variation for seedling survival and field growth, whereas the effects of family x site interaction ware relatively small as compared with the former sources of variation. Variance components estimated from the separate and combined sites indicated that the most variabilities were associated with individual trees within plot. Family ${\times}$ site interaction components as a percentage of family variance decreased sharply with age. Heritability estimates varied with testing site and tree age. Combined analyses, however, showed a moderate change in heritability with increasing tree ages, and demonstrated high and stable trends of estimates, particularly in family heritabilities of tree height ($h_F{^2}=0.789-0.798$). The gains estimated from combined analysis have expected maximum or near-maximum efficiencies at age 6 or 7. Given equal intensity of selection, mass selection showed the most efficient gains within and across the sites. However, for the differences between mass and combined selections are small, selection made on the combination of family and within-family would be more effective in improving genetic gains. Indirect selection method indicated that 5-and 6-years height were all good predictors of 9-year-old height with little loss of relative efficiency (less than 10%) as compared with direct family selection at age 9. Phenotypic and genetic correlations computed on the basis of family mean values of height and diameter have shown predominantly high, positive, and statistically significant (1% level) relationships between all tested pairs of traits, which indicates that family growth maintained statistically consistent trends with age. The best families are those that maintained a stable superiority overall sites and ages in growth performance, therefore, it can be suggested that early identification of superior families at age 9 is feasible at age 5 or 6 in Pinus koraiensis S. et Z.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.82-89
• /
• 2014

Purpose: The purpose of this study was to observe the change of viscoelastic properties of dental resin cements during polymerization. Materials and methods: Six commercially available resin cement materials (Clearfil SA luting, Panavia F 2.0, Zirconite, Variolink N, RelyX Unicem clicker, RelyX U200) were investigated in this study. A dynamic oscillation-time sweep test was performed with AR1500 stress controlled rheometer at $32^{\circ}C$. The changes in shear storage modulus (G'), shear loss modulus (G"), loss tangent (tan ${\delta}$) and displacement were measured for twenty minutes and repeated three times for each material. The data were analyzed using one-way ANOVA and Tukey's post hoc test (${\alpha}$=0.05). Results: After mixing, all materials demonstrated an increase in G' with time, reaching the plateau in the end. RelyX U200 demonstrated the highest G' value, while RelyX Unicem (clicker type) and Variolink N demonstrated the lowest G' value at the end of experimental time. Tan ${\delta}$was maintained at some level and reached the zero at the starting point where G' began to increase. The tan ${\delta}$and displacement of the tested materials showed similar pattern in the graph within change of time. The displacement of all 6 materials approached to zero within 6 minutes. Conclusion: Compared to other resin cements used in this study, RelyX U200 maintained plastic property for a longer period of time. When it completed the curing process, RelyX U200 had the highest stiffness. It is convenient for clinicians to cement multiple units of dental prostheses simultaneously.

• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.5-33
• /
• 2003

This study is about the re-validation evaluation of the family Relationship Scale (FRS), developed to measure the family relationship in the social work practice. This study aims at re-validating the FRS, developed and validated in by Yang in 2001 for more general utilization. The sample was married mates and females residing in Seoul. For Face Validity, the content analysis was performed, and the FRS was re-validated in the dimensions of Love & Caring, Acceptance, and Recognition, positive affection, empathy, and autonomy and flexibility for each area. Internal reliability was .93, and internal consistency among three dimensions was 93%. For Empirical Validity, the Construct validity, the Criterion validity, and the Discriminant validity were performed. Construct Validity was validated through factor analyses. Commonalities for the factor analysis was 54%, and the factor loading for each factor was over .45. The confirmative factor analysis also confirmed the fitness of the scale. For Predictive Validity of Criterion Validity, regression analysis showed that the family stress scores became lower as the scores of the family relationship became higher; the discriminant analysis revealed that the family stress turned low ill tile group of high scores of family relationship. The Correlation analysis for Concurrent Validity was performed and the results showed the positive and significant relationship with a couple communication level (r=54) and a parent-child communication level (r=64). Life satisfaction and mental health level also revealed significantly positive correlation to prove Convergent Validity. Physical health level revealed a weak relationship with family relationship providing the evidence of Discriminant Validity. Discriminance was also proved by the analysis of variance with demographics. Thus, Cross Validation was confirmed the validation of the FRS through the various analyses with the married population. This study result improved the validity generalization of the Scale and verify the generalized usage of this sociometric scale in the field of social work practice.

• Clinical and Experimental Pediatrics
• /
• v.52 no.1
• /
• pp.36-43
• /
• 2009

urpose : The renin-angiotensin system (RAS) has been demonstrated to play a major role in regulating blood pressure. Therefore, components of the RAS are likely candidate genes that may predispose an individual to essential hypertension and cardiovascular complications. Among them, the M235T polymorphism of the angiotensinogen gene has been speculated to be associated with elevated circulating angiotensinogen concentrations and essential hypertension. This study aimed to analyze the angiotensinogen M235T polymorphism in hypertensive adolescents and investigate its relationship with cardiovascular risks. Methods : Forty Korean hypertensive adolescents (aged 16-17, systolic $BP{\geq}140 mmHg$ and/or diastolic $BP{\geq}90 mmHg$) and fifty seven normal adolescents were included. Obesity index (OI), body mass index (BMI) were calculated. BP was measured by oscillometric methods in resting state. Polymerase chain reaction (PCR) technique was performed on DNA from the hypertensives subjects to analyze the M235T polymorphism. Serum homocysteine, insulin, renin, aldosterone and angiotensin converting enzyme (ACE) were tested according to each genotype. The carotid intima-media thickness (IMT) and carotid artery diameter, Pulse wave velocity (PWV) and ankle-brachial index (ABI) were measured according to each genotype. Results : Genotype frequencies of T/T, M/T and M/M were 62.5%, 35.0%, 2.5%, respectively in hypertensive adolescents. The results were not significantly different compared to control group. Serum insulin, renin levels, BMI and OI were significantly higher in thoses with the M/M genotype as compared to those with the T/T of M/T genotype. Conclusion : This study showed that the M235T polymorphism was not associated with essential hypertension or any cardiovascular risks. Further clinical research is required to ascertain the relationship between this polymorphism and cardiovascular complications in Korean hypertensive adolescents.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.469-476
• /
• 2011

This study was conducted to evaluate the functional effects of adding oyster shell powder on the quality properties and storage stability of emulsion-type pork sausages to substitute phosphates as a curing agent. Seven treatments were prepared: T1 (Control), T2 (0.3% STPP), T3 (1.5% NaCl), T4 (1.5% NaCl + 0.5% whey protein), T5 (1.5% NaCl + 0.5% whey protein + 0.15% oyster shell powder), T6 (1.5% NaCl + 0.5% whey protein + 0.3% oyster shell powder), and T7 (1.5% NaCl + 0.5% whey protein + 0.5% oyster shell powder). Significant differences were observed for ash in the proximal analysis. Adding 0.5% oyster shell powder significantly increased pH values when compared to the other treatments. Pork sausages with 0.3% oyster shell powder had significantly improved water holding capacity and cooking loss. Adding oyster shell powder (0.15, 0.3, and 0.5%) resulted in significantly higher hardness, cohesiveness, springiness, and chewiness values than those in the other treatments. No significant differences were observed among treatments during 14 d of cold storage at $4^{\circ}C$.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.160-166
• /
• 2012

Purpose: The aim of this study was to determine the patterns of the stress distribution within the reconstructed anterior cruciate ligament (ACL) double bundles in response to an anterior tibial load and rotatory load at $45^{\circ}$ flexed knee model by use of a 3-dimensional finite element analysis (FEM). Materials and Methods: The $0^{\circ}$ and $45^{\circ}$ flexed 3-D knee model were reconstructed based on the high resolution computed tomography (CT) images from the right knee of a healthy male subject. To simulate double bundle ACL reconstruction, in $0^{\circ}$ analytic model, four 7 mm diameter tunnels were created at the center of each anteromedial (AM) and posterolateral (PL) footprints on the femur and tibia. The grafts were inserted into the corresponding bone tunnels and then reconstructed knee model was flexed to $45^{\circ}$. As a next step, the 5 mm anterior tibial load and internal rotational load of $10^{\circ}$ were applied on the final Computer aided design (CAD) model. And then stress patterns of each bundle were assessed using a finite element analysis. Results: In response to the 5 mm of anterior tibial load, the AM bundle showed increased stresses around the tibial and femoral attachment sites; especially in the anterior aspect of the bundle. In the PL bundle, the highest stress concentration was also noticed on the anterior aspect of the bundle. Under $10^{\circ}$ internal rotational load, the stress concentration was predominant around the anterior aspect of the tibial attachment site within the AM bundle. The PL bundle also showed highest stress concentration on the anterior aspect of the bundle. Conclusion: Although the stress patterns were not identical among the AM and PL bundle, there were common trends in the stress distribution. The stress concentration was predominant on the anterior aspect of both bundles in response to the anterior tibial load and rotatory load.